• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.101-110
• /
• 2013

This paper considers the many kinds of attitude control systems including launcher. JVC(Jet vane control), Jet tap, Jetvator and Movable nozzles are used to control the initial attitude of a missile only. Recently side jet thruster and it's applications to control initial turn and to maneuver at high altitude have been increased. How to design and develop the missile for an initial turn and a high maneuver at high altitude using side jet thrust were described in this paper.

• Journal of the military operations research society of Korea
• /
• v.30 no.1
• /
• pp.81-91
• /
• 2004

Since HLA (High Level Architecture) was selected as a standardized distributed simulation architecture by US DoD in order to guarantee interoperability among all types of simulations, weapons system and C4I systems, to improve reusability of developed models in mid 1990s, a large number of federates have been developed and certified in accordance with HLA specifications. This paper illustrates case studies on HLA compliance test which are helpful for developers and managers. Based on experiences obtained from international HLA compliance test of CJ21_NG being developed for ground warfare simulation during ROKA's BCTP and UFL exercises, compliance procedures of US Defense and Modelling Simulation Office (DMSO) are introduced, and detail information at each phase of compliance test is provided.

• Journal of the military operations research society of Korea
• /
• v.30 no.1
• /
• pp.107-134
• /
• 2004

Today's Internet is providing a single service which is so-called "best-effort service". Now, multimedia and real-time applications are not only demanding large bandwidth but also requiring high QoS. For this, MPLS and DiffServ technology can be adopted to support more scalability and QoS for data traffic engineering. The DISN(Defense Information Systems Network) supports CBR service for voice traffic and VBR service for data traffic which is best-effort service. We propose how to adopt MPLS and DiffServ technology to support traffic engineering and guarantee QoS in the DISN. A traffic analysis according to prioritized traffic classes is done using OPNET simulation tool for assuring QoS. The result shows that low priority packets are delayed a little bit, but high priority packets are transferred more efficiently than without traffic engineering.gineering.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.207-215
• /
• 2001

Plastic bonded explosive(PBX) is mainly composed of the nitramine-ploymer compositions. PBX is characterized by high velocity and pressure of detonation, low vulnerability and good thermal stability. Many important applications of PBX require the good adhesion between nitramine crystals and the binder. For PBXs as well as propellants, where good mechanical properties are of great importance, dewetting therefore must be prevented by strong adhesion between filler-binder. Adhesion depends on surface characteristics of filler and binder. In order to design for better adhesion, an understanding of the surface properties of explosive and binder is required. The surface free energies are calculated from contact angle values by the method of Kaelble. Critical surface tension of solids are calculated by Zisman plot. Critical surface tension is a useful parameter for characterizing the wettability of solid surface. In this study, HMX and 3 kinds of copolymers are selected, since they are widely used in many plastic bonded explosives. The technical objective of this investigation is to predict the interaction between filler and binder from their surface free energies.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.6
• /
• pp.574-581
• /
• 2020

This paper describes the stacking effect for Ceramic Column Grid Array(CCGA) packages used for satellites. Reflow Soldering Process suitable for CCGA package with back structure was set as the process development goal to meet European Cooperation for Space Standardization(ECSS) standard. After analyzing the stacking effect according to the type of CCGA, it is verified by applying it to the CCGA Reflow Soldering Process. In order to confirm the validity of the staking effect analyzed in terms of vibration and thermal characteristics, it is verified through actual specimen production. It analyzes the cause of crack occurrence in the CCGA package and estimates the crack generation point using previously acquired inspection data.

• Korean Journal of Mathematics
• /
• v.6 no.1
• /
• pp.127-135
• /
• 1998

Let ${\rho}(A)$ and ${\rho}(B)$ denote the orders of entire functions $A(z)$ and $B(z)$ respectively. Suppose that ${\rho}(A)$ > 1 and 0 < ${\rho}(B){\leq}\frac{1}{2}$, and that ${\rho}$(A) is not an integer. Then it is shown that every nonconstant solution $f$ of $f^{{\prime}{\prime}}+A(z)f^{\prime}+B(z)f=0$ is of infinite order if all the zeros of $A(z)$ lie in a certain angular sector depending on its genus. In addition, we investigate some growth properties of $A(z)$.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.95-100
• /
• 2006

The pulse compression technique using Linear FM signal is commonly used for improving the performance of both the detection range and range resolution in radar system. In general, the compressed LFM waveform has relatively large sidelobe level which may prevent a target from being detected when strong jammer or clutter signal is near the target signal. In this paper, we propose a new weighting method which uses the square-root weight to suppress the sidelobe level. Typical applications are missile seekers and tracking radar systems where target tracking range is available prior to the signal processing. By computer simulation, we show that the performance of the proposed method is better than that of the conventional weighting methods in terms of sidelobe suppression.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.116-122
• /
• 2006

A fast scan digital-IF FFT receiver at the radio communication band is presented for spectrum monitoring applications. It is composed of three parts: RF front-end, fast LO board, and signal processing board. It has about 19GHz/s scan rate, multi frequency resolution from 10kHz to 2.5kHz, and high sensitivity of below -99dBm. The design and performance analysis of the digital-IF FFT receiver are presented.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.1
• /
• pp.25-32
• /
• 2008

In this paper, we propose how to efficiently apply IP and TDL(Tactical Datalink) protocol to the Link-K network for using their applications on the host system. We classify 3 kinds of communication method between IP network and TDL network. We explain the concepts of Like-to-Like communication (Link-K over IP, IP over Link-K) and Any-to-Any communication. We describe the characteristics and the implementation range of tactical datalink processor for each communication method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.328-335
• /
• 2010

A hyperspectral imaging spectrometer has shown significant advantages in performance over other existing ones for remote sensing applications. It can collect hundreds of narrow, adjacent spectral bands for each image, which provides a wealth of information on unique spectral characteristics of objects. We have developed a compact hyperspectral imaging system that successively shows high spatial and spectral resolutions and fast data processing performance. In this paper, we present an overview of the hyperspectral imaging system including the strucure of geometrical optics and several image processing schemes such as wavelength calibration and noise reduction for image data on Visible and Near-Infrared(VNIR) and Shortwave-Infrared(SWIR) band.