• Bulletin of the Korean Chemical Society
• /
• v.10 no.1
• /
• pp.112-112
• /
• 1989

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.2
• /
• pp.113-123
• /
• 1990

To study deleterious effects of contaminants contained in lubricating systems, the effects of fine alumina particle concentration and size on the critical failure load, friction and wear characteristic were examined on boundary lubrication condition using the four ball machine. The following conclusions are deduced: The abrasive is found to cause a transition from mild wear to severe wear at less severe conditions than with clean oil. In mild wear region the friction and wear increase with particle size and concentration, but in severe wear region do not exhibit any definite trend. In relation to film thinckness there is a threshold of particle size beyond which the failure load no longer decreases with particle size.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.37-41
• /
• 1990

The quality of cutting surface such as surface roughness, heat affected zone, serf width can be improved by controlling the parameters of cuting process. These parameters includes cutting velocity, laser beam power, material depth and assistant gas. Thermodynamic analysis and systematical experiments are attempted to pedict and determine the optimal cutting condition. There exists the optimal cutting condition to ensure high quality surface. Under this operation, the minimum surface roughness of the mild steel, the stainless steel and the titanium becomes 3.8${\mu}{\textrm}{m}$ 13${\mu}{\textrm}{m}$ and 10${\mu}{\textrm}{m}$ respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.1
• /
• pp.82-90
• /
• 2012

Four different buildings having various wall construction are analyzed for the effect of wall mass on the thermal performance and inside building air and wall temperature transient and also for calculating the energy consumption load. This analytical study was motivated by the experimental work of Burch et al. An analytical solution of one-dimensional, linear, partial differential equations is obtained using the Laplace transform method, Bromwich and modified Bromwich contour method. A simple dynamic model using steady state analysis as simplified methods is developed and results of energy consumption loads are compared with results obtained using the analytical solution. Typical Meteorological Year data are processed to yield hourly average monthly values. This study is conducted using weather data from two different locations in Korea: Daegu having severe weather in summer and winter and Jeju having mild weather almost all year round. There is a significant wall mass effect on the thermal performance of a building in mild weather condition. Buildings of heavyweight construction with insulation show the highest comfort level in mild weather condition. A proportional controller provides the higher comfort level in comparison with buildings using on-off controller. The steady state analysis gives an accurate estimate of energy load for all types of construction. Finally, it appears that both mass and wall insulation are important factors in the thermal performance of buildings, but their relative merits should be decided in each building by a strict analysis of the building layout, weather conditions and site condition.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.2
• /
• pp.103-108
• /
• 2012

A MILD (Moderate and Intense Low oxygen Dilution) combustor decreases NOx formation effectively during the combustion process and NOx formation is affected significantly by the exhaust gas entrainment rate toward fuel and air. The present study focused on the new MILD combustor, which has coaxial cylindrical tube. The outside tube of the new MILD combustor corresponds to the exhaust gas passage and the inner side tube is the furnace passage. The connection pipe is set between the outer side and the inner side tubes and coaxial air nozzle is inserted at the center of the connection pipe. A numerical analysis is accomplished to elucidate the characteristics of exhaust gas entrainment toward the inner furnace with the changes of air nozzle exit velocity, nozzle diameter, nozzle exit position and exhaust gas side pressure. The entrainment rate is proportional to the square root of air nozzle exit velocity and negatively proportional to the pressure difference between the exhaust gas side and furnace side pressures. The effect of air nozzle exit position is not considerable on the exhaust gas entrainment.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.3
• /
• pp.304-310
• /
• 2022

Objective: Mild cognitive impairment (MCI) is a condition in which cognitive and executive functions are reduced, and older adults with MCI are ten times more likely to develop dementia than healthy older adults. Expression of brain-derived neurotrophic factor (BDNF) through aerobic exercise is associated with increased cognitive and executive functions. in this review, randomized controlled trials (RCTs) on the effects of aerobic exercise on BDNF in individuals with mild cognitive impairment are summarized and qualitatively and quantitatively analyzed to suggest the necessity of aerobic exercise. Design: a systematic review and meta-analysis. Methods: RCTs were searched for changes in BDNF through aerobic exercise using four international databases. Quality assessment and quantitative analysis were performed using RevMan 5.4. Quantitative analysis was quantified with a standardized mean difference (SMD) and presented as a random effect model. Results: Three RCTs evaluated BDNF in 123 patients with MCI. There was a significant improvement in the experimental group that performed aerobic exercise compared to the control group. The results analyzed using the random effects model were SMD = 0.48. Conclusions: In this review, we reported the effects and mechanisms of aerobic exercise in individuals with MCI. As a result of synthesizing RCTs that performed aerobic exercise, a significant increase in BDNF was confirmed.

• Journal of Navigation and Port Research
• /
• v.31 no.7
• /
• pp.579-587
• /
• 2007

Samchunpo(Sin Hyang) Harbor is located in the bay of Sa Chun, the central south coast of Korean peninsula. The harbor and coastal boundaries have been protecting by natural coastal islands and shoals. Currently, The Sin Hyang harbor needs maintenance and renovation of the sheltered structures against the weather deterioration and typhoon damages. Consequently to support this, the calculation of accurate design wave through the typhoon wave attack is necessary. In this study, calculation of incident wave condition is simulated using steady state spectrum energy wave model(wide area wave model) from 50 years return wave condition. And this simulation results in wide offshore area were used for the input of the extended mild slope wave model at the narrow coastal area. Finally, the calculation of design wave at Sin Hyang harbor entrance was induced by Boussinesq wave model(detail area wave model) simulation. The numerical model system was able to simulate wave transformations from generation scale to shoreline or harbor impact. We hope these results will be helpful to the engineers doing placement, design, orientation, and evaluation of a wide range of potential solutions in this area.

• Korean Journal of Health Education and Promotion
• /
• v.13 no.1
• /
• pp.90-116
• /
• 1996

The purpose of this study is to provide basic data for the children so as to avoid any accidents and to improve their health through a sound and safe living environment with safety education established through more systematic methods. For the study, the methods used include the questionnaires for collecting data which are distributed among 273 children from 3 to 6 years old. They live in three districts of Seoul (Kangnam and Kangbuk), Kyeonggido (Munsan and Ilsan) and Incheon. The children's general characteristics are investigated and the relationship between the accident-proneness prospects and their results are analyzed assuming that children's health is expected to have an effect on their safety. The findings of the study are as follows: 1. The accident-proneness prospect (for the living safety) has significant difference in sleeping habits and physically weak conditions(p<0.05). 2. The accident-proneness prospect (for the traffic safety) has no significant difference in accordance with the children's health condition. 3. Children's reasoning power has no significant difference in accordance with their health condition. 4. Children's movement speed non-significantly differs in accordance with their health condition. 5. Children's movement stability has a significant difference in accordance with their health conditions such as history of mild disease(p<0.05) and physical work capacity(p<0.05). 6. Children's attention power has no significant difference in accordance with their health condition. 7. Children's characteristic activities show a significant difference in accordance with their health history of mild disease(p<0.05). mental health(p<0.05). eating habits(p<0.05) and others (i.e. auditory abnormality and skin desease)(p<0.05). 8. General assessment of the APP test has no significant difference in accordance with their health condition. 9. The health conditions are a significant difference in the history of mild disease in accordance with sex(p<0.05) and whole family members(p<0.001). Also there are shown significant differences. in accordance with sex(p<0.05). in physical work capacity(p<0.05). Eye sight, blood circulation and skin condition show significant differences in accordance with residence(p<0.05) and whole family members(p<0.01). and the condition of eating habits appeared significant in accordance with age(p<0.05). Also, sleeping habits and physically weak conditions shows significant differences in accordance with age(p<0.001) and housing pattern(p<0.01), and others (i.e. auditory abnormality and skin desease) show significant differences in accordance with residence (p<0.001).

• Korean Journal of Materials Research
• /
• v.22 no.11
• /
• pp.591-597
• /
• 2012

For heat exchanger applications, 2-ply clad materials were fabricated by rolling of aluminum (Al) and mild steel sheets. Effects of annealing temperature on interface properties, especially on inter-layer formation and softening of strain hardened mild-steel, for Al/mild steel clad materials, were investigated. To obtain optimum annealing conditions for the Al/mild steel clad materials, annealing temperature was varied from room temperature to $600^{\circ}C$. At the annealing temperature about $450^{\circ}C$, an inter-layer was formed in an island-shape at the interface of the Al/mild steel clad materials; this island expanded along the interface at higher temperature. By analyzing the X-ray diffraction (XRD) peaks and the energy dispersive X-ray spectroscopy (EDX) results, it was determined that the exact chemical stoichiometry for the inter-layer was that of $Fe_2Al_5$. In some samples, an X-layer was formed between the Al and the inter-layer of $Fe_2Al_5$ at high annealing temperature of around $550^{\circ}C$. The existence of an X-layer enhanced the growth of the inter-layer, which resulted in the delamination of the Al/mild-steel clad materials. Hardness tests were also performed to examine the influence of the annealing temperature on the cold deformability, which is a very important property for the deep drawing process of clad materials. The hardness value of mild steel gradually decreased with increasing annealing temperature. Especially, the value of hardness sharply decreased in the temperature range between $525^{\circ}C$ and $550^{\circ}C$. From these results, we can conclude that the optimum annealing temperature is around $550^{\circ}C$ under condition of there being no X-layer creation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.1
• /
• pp.76-85
• /
• 2002

The floating breakwater generally has an excellent water exchanging capability, but with some lowering harbor tranquility due to the wave transmission underneath floating body. In the initial stage of design, it is thus required to investigate several alternatives of breakwater layout for their performance of harbor tranquility. The present study aims to formulate a sort of reflection-transmission boundary condition of floating breakwater so that the existing numerical method using time dependent mild slope equation can still be applied to the case of floating breakwaters. The two and three dimensional tests were each performed to demonstrate the performance of the boundary condition. It was found that the reflection and transmission characteristics around the breakwater were well reproduced by the boundary condition. Finally, the reflection-transmission boundary condition were applied to a floating breakwater installed in an imaginary harbor with an irregular shape and bottom topography. The results surely showed that the present numerical method can effectively used in practical works related to the real sea construction of floating breakwaters.