• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.136-138
• /
• 2006

Recently a lots of problems have observed in high densified and high integrated electronic components. One of them is ion migration phenomena, which induce the electrical short of electrical circuit. Ion migration phenomena has been observed in the field of exposing the specific environment and using for a long time. Also as the RoHS restriction was started in July 1st, 2006, Pb-free solder was utilized in electronics assemblies. In this case, it is very important to compatible between components and printed circuit board(PCB), thus surface treatment materials of PCB was changed to Sn, Sn-3.0Ag-0.5Cu, Cu. Therefore these new application become to need to reevaluate the sensitivity about electrochemical ion migration. This study was evaluated the occurrence time of electrochemical ion migration using by water drop test. We utilized PCB(printed circuit board) having a comb pattern as follows 0.1, 0.318, 0.5, 1.0 mm pattern distance. Sn-3.0Ag-0.5Cu and Sn-37Pb were electroplated on the comb pattern. 6.5V and 15.0V were applied in the comb pattern and then we measured the electrical short time causing by occurring the ion migration. In these results, we evaluate the sensitivity and derived the prediction models of ion migration occurrence time depending on the pattern materials, applied voltage and pattern spacing of PCB conductor.

• Journal of the korean veterinary medical association
• /
• v.15 no.7
• /
• pp.405-407
• /
• 1979

• Journal of Soil and Groundwater Environment
• /
• v.8 no.1
• /
• pp.35-41
• /
• 2003

Laboratory procedures are available for estimating contaminant migration from sediment into caps by diffusion, but diffusion may not be the major process affecting capping effectiveness. Movement of contaminated pore water from sediment into caps due to sediment consolidation during and after cap placement may be much more significant than contaminant diffusion into caps. To verify this phenomenon, model tests were conducted by utilizing a research centrifuge. In this study, test was modeled for 22.5 hours at 100 g, which modeled a contaminant migration time of 25 years for a prototype that was 100 times larger than the centrifuge model. Centrifuge test results illustrate that advection and dispersion due to consolidation are dominating the migration of contaminants.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.3 s.40
• /
• pp.1-8
• /
• 2006

Higher density integration and adoption of new materials in advanced electronic package systems result in severe electrochemical reliability issues in microelectronic packaging due to higher electric field under high temperature and humidity conditions. Under these harsh conditions, metal interconnects respond to applied voltages by electrochemical ionization and conductive filament formation, which leads to short-circuit failure of the electronic package. In this work, in-situ water drop test and evaluation of corrosion characteristics for SnPb solder alloys in D.I. water and NaCl solutions were carried out to understand the fundamental electrochemical migration characteristics and to correlate each other. It was revealed that electrochemical migration behavior of SnPb solder alloys was closely related to the corrosion characteristics, and Pb was primarily ionized in both D.I. water and $Cl^{-}$ solutions. The quality of passive film formed at film surface seems to be critical not only for corrosion resistance but also for ECM resistance of solder alloys.

• Archives of Plastic Surgery
• /
• v.45 no.5
• /
• pp.425-431
• /
• 2018

Background The umbilicus makes an important contribution to the natural appearance of the abdomen. To date, studies on its position in Korean women are lacking, and no standards have been established. The purpose of this study was to investigate the position of umbilicus in Korean women and to review changes in its position after ipsilateral pedicled rectus abdominis musculocutaneous (IP-RAM) flap. Methods This research consisted of two studies. In first study, 100 females who visited the emergency department with gastroenteritis between 2007 and 2011 were included. In second study, 40 women who underwent IP-RAM flap in the same period were included. Using abdominal computed tomography, we measured the distance between xiphoid process and umbilicus, represented by value a, and the distance between umbilicus and symphysis pubis, represented by value b. Thus, the location of the umbilicus was represented by the ratio a/b. The data were analyzed using Pearson correlation test and paired t-test. Results In study 1, the mean value of a/b was 1.07. Pearson correlation test revealed a significant correlation between age and a/b. In study 2, the mean value of a/b was 1.16 in preoperative measurements and 1.01 in postoperative measurements. The paired t-test showed a significant difference between preoperative and postoperative measurements, indicating cephalic migration of the umbilicus after surgery. Conclusions The natural position of the umbilicus showed caudal migration with aging. Additionally, in a comparison of preoperative and postoperative measurements in patients who underwent IP-RAM flap, cephalic migration of the umbilicus was observed after surgery.

• Advances in concrete construction
• /
• v.7 no.2
• /
• pp.87-96
• /
• 2019

Self-compacting concretes (SCC) are highly fluid concrete which can flow without any vibration. Their composition requires a large quantity of fines to limit the risk of bleeding and segregation. The use of crushed sand rich in limestone fines could be an adequate solution for both economic and environmental reasons. This paper investigates the influence of quarry limestone fines from manufactured crushed sand on rheological, mechanical and durability properties of SCC. For this purpose, five mixtures of SCC with different limestone fines content as substitution of crushed sand (0, 5, 10, 15 and 20%) were prepared at constant water-to-cement ratio of 0.40 and $490kg/m^3$ of cement content. Fresh SCC mixtures were tested by slump flow test, V-funnel flow time test, L-box height ratio, segregation resistance and rheological test using a rheometer. Compressive and flexural strengths of SCC mixtures were evaluated at 28 days. Regarding durability properties, total porosity, capillary water absorption and chloride-ion migration were studied at 180 days. For the two test modes in fresh state, the results indicated compatibility between slump flow/yield stress (${\tau}_0$) and V-funnel flow time/plastic viscosity (${\mu}$). Increasing the substitution level of limestone fines in SCC mixtures, contributes to the decrease of the slump flow and the yield stress. All SCC mixtures investigated achieved adequate filling, adequate passing ability and exhibit no segregation. Moreover, the inclusion of limestone fines as crushed sand substitution reduces the capillary water absorption, chloride-ion migration and consequently enhances the durability performance.

• Computers and Concrete
• /
• v.9 no.5
• /
• pp.375-387
• /
• 2012

The objective of this investigation was to develop rules for automatic categorization of concrete quality using selected artificial intelligence methods based on machine learning. The range of tested materials included concrete containing a new waste material - solid residue from coal combustion in fluidized bed boilers (CFBC fly ash) used as additive. The rapid chloride permeability test - Nordtest Method BUILD 492 method was used for determining chloride ions penetration in concrete. Performed experimental tests on obtained chloride migration provided data for learning and testing of rules discovered by machine learning techniques. It has been found that machine learning is a tool which can be applied to determine concrete durability. The rules generated by computer programs AQ21 and WEKA using J48 algorithm provided means for adequate categorization of plain concrete and concrete modified with CFBC fly ash as materials of good and acceptable resistance to chloride penetration.

• Journal of the Korean Ceramic Society
• /
• v.46 no.2
• /
• pp.155-160
• /
• 2009

The reliability could be one of the essential properties for multilayer ceramic capacitor (MLCC) using in various electronic devices and the concentration and mobility of oxygen vacancy would play important role in the reliability. To investigate the migration behavior of oxygen vacancies, thermally stimulated depolarization current (TSDC) is adopted. In dielectric material of X5R MLCC, the TSD-Current peak observed around 150$^{\circ}C$ and 200$^{\circ}C$ which represented the migration of oxygen vacancy. Substituting Yttrium for Dysprosium in X5R MLCC showed higher migration activation energy and lower TSD current density.

• Food Science and Biotechnology
• /
• v.15 no.1
• /
• pp.133-137
• /
• 2006

Wheat gluten-chitosan composite film (WGCCF) can prevent moisture migration and enhance the antimicrobial properties of gluten in intermediate-moisture foods like sandwiches. To mimic the structure of actual sandwich-type products we developed multi-layer food models, where moisture content and water activity differ. Water activity gradients direct moisture migration and therefore determine product characteristics and product stability. A 10% wheat gluten film-forming solution was mixed with chitosan film-forming solution (0-3%, w/w) and evaporated to generate WGCCF. Addition of 3% chitosan enhanced the mechanical properties of the film composite, lowered its water vapor permeability, and improved its ability to protect against both, Streptococcus faecalis and Escherichia coli, in a 24 hr sandwich test (reduction of 1.3 and 2.7 log cycles, respectively, compared to controls). Best barrier and antimicrobial performance was found for 3% chitosan WGCCF at pH 5.1. Film of this type may find application as barrier film for intermediate-moisture foods.

• Journal of Labour Economics
• /
• v.41 no.2
• /
• pp.61-88
• /
• 2018

This paper examines the impact of internal migration on wage growth among college graduates using Propensity Score Matching methods. We define migration as moving between Seoul Metropolitan Area (SMA) and non-SMA based on the locations of graduates' first and second jobs. We also take the direction of migration into account for examining the wage premium in SMA. In order to estimate the impact of migration on wage growth, we use the Graduate Occupational Mobility Survey (2010GOMS) coupled with other supplementary data such as College Scholastic Ability Test score and local characteristic variables. The results reveals that graduates moving from SMA to non-SMA do not experience significant wage growth. However, we find that graduates moving from non-SMA to SMA experience an increase in their monthly wage about 170,000~186,000 KRW on average (9.5~10.3% of their monthly wage on the first job).