• The International Journal of Costume Culture
• /
• v.8 no.2
• /
• pp.71-84
• /
• 2005

Fibulae have been used as clothing fasteners throughout history. They were especially popular with the Celts, but were also used by the Greeks, Romans, Saxons, and Vikings, to name a few. The earliest examples are found in the Mediterranean and Middle East, and date from 800 B. C. and earlier. Their use continues today, in the form of the modern safety pin. The first fibulae of the Bronze Age were very simple, much like modern safety pins. The form of this small functional object varies from simple to extravagant since it is also seen as a piece of jewelry, and is thus subject to the evolution of style. Its size depends on the thick/Jess of the clothing to be attached. Its fabrication demonstrates a great mastery of metal work. Fibulae would vary with the taste and wealth of the wearer. The Fibulae were divided into 10 styles according to the shape, Fibulae with Safety pin shaped style, Penannular shaped style, Animal shaped style, Diamond shaped style, Radiated head shaped style, Horsefly shaped style, Arched bow shaped style, Fan-shaped style, Trumpet shaped style, Arched-fan shaped style.

• 한국가스학회:학술대회논문집
• /
• 1997.09a
• /
• pp.33-38
• /
• 1997

Demand of the clean and convenient natural gas has continuously increased with recognizing of the environment problem since liquefied natural gas was introduced in Korea. Clean fuel natural gas was supplied to each city through high tensile strength pipeline connected by welding. Grades of pipeline were divided into the high and middle pressure according to supply pressure. Pipeline was welded mainly SMA welding process due to its easy handling, the other welding process was adopted according to the constructing condition. We were examined on the microstructure variation and mechanical properties of weld metal for high pressure pipeline, API 5L X-42.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.3
• /
• pp.41-47
• /
• 2007

The purpose of this study is to collect and analyze their opinions to found solutions for reducing safety accidents since it is important to educate the students to recognize the importance of safety. We surveyed 350 students from mechanical and metal engineering departments of an engineering high school located in Seoul, and divided them in two categories and asked them about prevention of safety accidents in laboratories. It is found that further directions and educations are needed for the students as to emergency measures in case of safety accidents. Safety education before laboratory classes is crucial, helpful and effective for prevention of safety accidents. Facility factors that further education is needed for students who don't experiments in orderly manner.

• Journal of Powder Materials
• /
• v.3 no.2
• /
• pp.104-111
• /
• 1996

In order to obtain homogeneous and high quality products in powder compaction forging process, it is very important to control stress, strain, density and density distributions. Therefore, it is necessary to understand quantitatively the elasto-plastic deformation and densification behaviors of porous metals and metal powders. In this study, elasto-plastic finite element method using Lee-Kim's pressure dependent porous material yield function has been used for the analysis of three dimensional indenting process. The analysis predicts deformed geometry, stress, strain and density distribution and load. The calculated load is in good agreement with experimental one. The calculated results do not show axisymmetric distributions because of the edge effect. The core part which is in contact with the indentor and the outer diagonal edge part are in compressive stress states and the middle part is in tensile stress state. As a results, it can be concluded that three dimensional analysis is more realistic than axisymmetric assumption approach.

• Journal of the Korean Ceramic Society
• /
• v.55 no.2
• /
• pp.174-177
• /
• 2018

ZnO/Ag/ZnO multilayers were fabricated and their optical properties were investigated in terms of the micro-cavity effect in electroluminescent devices based on colloidal quantum dots. The top and bottom ZnO layers were formed by a sol-gel method while the middle Ag layer was deposited by thermal evaporation. After the fabrication of the ZnO/Ag/ZnO structure, the transmittance increased to 74%. When the oxide/metal/oxide multilayers were applied to quantum dot light-emitting diodes, the color purity was enhanced due to the narrower full width at half maximum.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.322-322
• /
• 2010

In this paper, we propose a novel type valveless micro-pump that uses extensional vibration mode of traveling wave as a volume transporting means for solving some problems about check valves, essential parts of usual pumps. The proposed pump consists of two piezoelectric ceramic rings and a metal body located in the middle of them respectively. Because the drift of bended surface that results from the traveling wave excitation controls the fluid flow, check valves are not needed in this pump model. In accordance with the variation of the pump body dimension, we analyzed the vibration displacement characteristics of pump model, determined the optimal design condition, fabricated the prototype pump from the analysis results and evaluated its efficiency.

• Journal of the Korea Furniture Society
• /
• v.23 no.3
• /
• pp.271-289
• /
• 2012

This study analyzes the Western rocking chair style of the middle of the 20th century (1945~1970), and investigates academically characteristics from formative and practical points of view. The purpose of this study is to provide basic information on the design and production of the modern Korean rocking chair. In the 20th century, the production of the Western rocking chair displayed principles of both functionalism and optimism. These rocking chairs are constructed of various industrial materials including reinforced plastics, moulded plywood, aluminium, and steel as well as wood. Furthermore, a rocking chair suitable to the human body is made by industrial growth and innovative fabrication techniques such as designer's plastic from military in the First and Second World Wars. In those days, there are many different types of rocker style - traditional, plastics, structural, moulded plywood & bending, metal tubular, and wire mesh. More specifically, through economic prosperity and plastic development, the rocking chair is able to have light and bright colors, which shows sensible formality of the modern and structure.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1061-1062
• /
• 2006

This paper presents a new approach for analyzing the microstructure of $SiC_p$-reinforced aluminum matrix composites from digital images. Various samples of aluminum matrix composite were fabricated by hot pressing the powder mixtures with certain volume and size combinations of pure Al and SiC particles. Microstructures of the samples were analyzed by computer-based image processing methods. Since the conventional methods are not suitable for separating phases of such complex microstructures, some new algorithms have been developed for the improved recognition and characterization of the particles in the metal matrix composites.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1303-1304
• /
• 2006

The type, volume fraction, size, shape and arrangement of embedded particles influence the mechanical properties of the particle reinforced metal matrix composites. This presents the investigation of the SiC particle and porosity distributions in various aluminum matrix composites produced by cold- and hot-pressing. The microstructures were characterized by optical microscopy and stereological parameters. SiC and porosity volume fractions, and the anisotropy distribution function were measured to establish the influence of the consolidation method.

• 연구논문집
• /
• s.24
• /
• pp.175-188
• /
• 1994

Water seal is composed of metal case, garter spring, and NBR. Axisymmetric, large deformation non-linear contact problems were solved by using the finite element method for the evaluation of performance of the water seal. Effects of the interference between seal and shaft, and the garter spring on the seal characteristics were considered in this analysis. The contact force and sealing performance increased as the interference and spring stiffness increases. And middle seal is main role sealing performance. Further research efforts are required to consider the effects of the garter spring stiffness, the eccentricity by the shaft or case, and the water pressure.