• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.938-945
• /
• 2007

For middle & small sized metal heat treatment companies in Korea, this paper is crucial to have a systematic way of collecting and storing field data, and extracting relevant information when necessary. Therefore, it is concerned with developing a metal heat treatment program system for production technique control which is mainly focused on processing heat treatment filed data, converting the data into meaningful production technique control information, and illustrating a case study of a middle & small sized company in Busan province. Consequently, we are implemented a production information system for metal heat treatment a middle & small sized type company.

• Journal of Environmental Science International
• /
• v.9 no.6
• /
• pp.495-503
• /
• 2000

Dust samples were collected from 17 middle and high schools in the Jeonju-city. heavy metal concentrations were determined for the dry-deposited dusts from indoor and outdoor of classroom and playground of each sampling site. Concentrations of Cd, Cr, Cu, Ni, Pb and Zn in indoor\`s dusts were highly concentrated. Also heavy metal concentrations in outdoor\`s dusts were similar to that of indoor\`s dusts. Concentrations of Cd, Cu, and Zn in the dusts were much higher than the world average contents in soil and environmental orientation value. These levels are similar to those of the dust samples at middle schools located at Kangseo-gu and Yangchon-gu , Seoul. Playground dusts in 6 schools exhibited the enhanced heavy metal pollution with a pollution index (by Kloke) greater than 1.0. Most indoor and outdoor dusts exhibited the enhanced heavy metal pollution with a pollution index(by Cullbard et al.) greater than 1.0.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.873-875
• /
• 2009

Middle distillate was produced by the hydrocracking of F-T wax on the zeolite catalysts. Novel metal loaded zeolite catalysts had good performance for hydrocracking of F-T wax. 2 wt.% Platinum loaded H-Y zeolite catalyst showed the highest selectivity of middle distillate and conversion of F-T wax. H-Y zeolite had more strong acidity site and large pore than that of another zeolite catalyst. So, H-Y zeolilte catalyst showed the best activity for hydrocracking of F-T wax.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.483-484
• /
• 2006

In this paper, we fabricated the organic bi-stable devices under the different condition from the other groups and analyzed the electrical characteristics. Then we investigated the effects of the device structure such as organic layer thickness, middle metal layer thickness and middle metal layer deposition rate on the memory characteristics.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.2
• /
• pp.308-318
• /
• 2009

This study makes clear Huang Yuan-Yu(黃元御)'s medical thoughts Yi-philosophically. Yi-philosophy(易學) since ancient times is occupied by fundamental problems of various fields of Oriental Science. Confusian Medicine Reseachers of Zhang Jie-Bin(張介賓), Zhang Nan(章楠), Zhu Zhen-Heng(朱震亨) was seriously affected by Yi-philosophy(易學) and Confucianism(儒學). But I don't think that the majority of their medicine theories are occupied by Yi-philosophy(易學) and Confucianism(儒學). But Huang Yuan-Yu(黃元御) studied medicine thoughts on the basis of Tu Shu Yi(圖書易) in almost whole medicine theories and clinical contents. Therefore this study researched medical thinkings of Huang Yuan-Yu(黃元御) on Yi-philosophical medical viewpoint Tu Shu Yi(圖書易)-scientifically. Especially in this paper the author examined a characteristic point in medical thoughts of Huang Yuan-Yu(黃元御), the difference of existing medicine on Nei-Jing(內經) and Yi-medicine of Huang Yuan-Yu(黃元御), a commonness of medicine principles of Huang Yuan-Yu(黃元御) and Li Ji-Ma(李濟馬)), medicine theories of Huang Yuan-Yu(黃元御) on Tu Shu Yi(圖書易) and a background of Yi-philosophical medical standpoint. The results was summarized as follows; First, Huang Yuan-Yu(黃元御)'s standpoint on five phase is that the relation of earth and wood fire metal water is form and use(體用). Huang Yuan-Yu(黃元御) insists that the earth represents existence itself and wood fire metal water is concepts that represents actual states. Second, the concept of Four-Constitution of Huang Yuan-Yu(黃元御) and Li Ji-Ma(李濟馬) is same. Third, Huang Yuan-Yu(黃元御) doesn't have a standpoint of five-phase on Nei-Ching Medicine, but a standpoint of five-phase on Yi-philosophy. Fourth, water, fire, metal, wood is Four-Constitution that middle qi transformed. Fifth, the middle qi is yang-earth and yin-earth of the spleen and stomach, the physiological function of four viscera is maintained by the movement of ascending and descending of yin and yang earth. Sixth, The middle qi is main role of Four-Constitution. Exchanging of water and fire and the movement of ascending and descending of metal and wood depends on the earth. Seventh, generally medicine researchers speak that human mind is a main role of psycho-function of heart, but Huang Yuan-Yu has the standpoint of spleen-stomach oriented seven emotions not human-mind oriented viewpoint. It represents that a existing thinking of heart-earth center is changed to medical viewpoint of spleen-earth center. Eighth, There is enough ground for controversy on where is the middle point of human in five viscera. Is that spleen or heart? Huang Yuan-Yu(黃元御) insists that the spleen and stomach is middle point, but the standpoint in Four-Constitution medicine of Li Ji-Ma(李濟馬) is that middle point is heart.

• Korean Journal of Metals and Materials
• /
• v.48 no.11
• /
• pp.1021-1027
• /
• 2010

The charpy impact property was lower at the surface and middle regions than that at the root region in metal welded by Tandem EGW of 82 mm thick EH40-TM steel plates. Temperature distribution in the weld sample and the heating/cooling temperature throughout the various regions in the weld metal were estimated by the commercial weld simulation program SYSWELD. The microstructure of the weld metal consisted of acicular ferrite and grain boundary ferrite. Grain boundary ferrite in the acicular ferrite matrix was found more in the surface and middle regions than in the root region, and the acicular ferrite was also coarser in the surface and middle regions where the impact toughness was lower and the input temperature was higher. Our results indicated that the impact toughness property was related to the microstructure morphology, the distribution of grain boundary ferrite, and the acicular ferrite.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.27-40
• /
• 2004

In this thesis, the connectivity between the military culture in the Middle Ages and costumes by researching the effect on the clothing in the Middle Ages of the culture of knight from the 11th century to middle of the 15th century was tried to be recognized. The culture of knight was widely divided into 4 articles - Chivalry, Tournamemt, The equipment of knight, Heraldry - and then researched. The conclusion after researching the influence of the culture of knight upon the clothing in the Middle Age in the above is as follows. Regarding the clothing, the military culture such as the crusader war, armor, and heraldry was popularized over the entire Middle Ages as the military-look style, and regarding the ornament the result of the crusader war caused the introduction of the Eastern civilization and development of the commerce and industry, and also trade, and consequently the ornament became luxurious. Regarding the footwear, when seeing the Gothic shoes, it can be found that it is similar with the knight's shoes made of the metal. As seen in the above, it can be recognized that the culture of knight caused the huge influence upon the whole politics, culture, and society in the Middle Ages as well as upon the costumes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.5
• /
• pp.477-491
• /
• 2001

The purpose of this study is to compare and analyze the shade changes(${\Delta}E^*$) about $In-Ceram^{(R)}$, $IPS-Empress^{(R)}$, $OPC^{(R)}$ by using of the spectrophotometer arising from inital status and before and after cementation of the resin cement mounted on the metal core. We used a couple of statistics such as 'One- Way ANOVA' and 'Multiple Range Test.' We could be able to verify significantly what is being discussed here up to 95%. The results drawn from our research are as follows : 1. At the time of our experiments regarding the initial shapes of all-ceramic and mounting status of all-ceramic on the metal crown(${\Delta}E^*1$), and a comparison of mounting of all ceramic on the metal crown with all-ceramic cemented on the metal core(${\Delta}E^*2$), at the time of shade change of initial shapes and after we cemented on the metal core. (1) no significant difference among all-ceramics was found. (2) no particular difference was found regarding the $In-Ceram^{(R)}$. (3) a significant difference between the ${\Delta}E^*1$ and ${\Delta}E^*2$ regarding the $IPS-Empress^{(R)}$ was found(P<0.05). (4) a significant difference between the ${\Delta}E^*1$ and ${\Delta}E^*2$ regarding the $OPC^{(R)}$ was found(P<0.05). 2. When we compared the shade changes(${\Delta}E^*$) resulted from before and after the cementation on each of the parts involved of some all-ceramic, we could be able to find shade change increase form incisal third, middle third. and cervical third in that order in $In-Ceram^{(R)}$(spinell), IPS $Empress^{(R)}$, and $OPC^{(R)}$ all. In addition. we could be able to find a significant difference between cervical third and incisal third, middle third. (P<0.05) From what we have just seen, we might conclude that there is a significant shade change difference before and after the cementation with respect to $IPS-Empress^{(R)}$ and $OPC^{(R)}$. In addition, we could also be able to find more shade change difference at the cervical third rather than incisal third and middle third depending on the parts involved.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.1
• /
• pp.55-60
• /
• 2003

The effect of size and volume fraction of ceramic particles, with sliding velocity on the wear properties were investigated for the metal matrix composites fabricated by the pressureless infiltration process. The metal matrix composites exhibited about 5.5 - 6 times the wear resistance compared with AC8A alloy at high sliding velocity, and by increasing the particle size and decreasing the volume fraction, the wear resistance was improved. The wear resistance of metal matrix composites and AC8A alloy exhibited different aspects. Wear loss of AC8A alloy increased with sliding velocity, linearly : whereas, metal matrix composites indicated more wear loss than AC8A alloy at the slow velocity region. However, a transition point of wear loss was found at the middle velocity region, which shows the minimum wear loss. Further, wear loss at the high velocity region exhibited nearly the same value as the slow velocity region. In terms of wear mechanism, the metal matrix composites generally exhibited abrasive wear at slow to high sliding velocity； however, AC8A alloy showed abrasive wear at low sliding velocity and adhesive and melt wear at high sliding velocity.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.379-384
• /
• 2002

The effect of size and volume fraction of ceramic particles with sliding velocity on the wear properties were investigated for the metal matrix composites fabricated by pressureless infiltration process. The particulate metal matrix composites exhibited about 5.5 - 6 times of excellent wear resistance compared with AC8A alloy at high sliding velocity, and as increasing the particle size and decreasing the volume fraction the wear resistance was improved. The wear resistance of metal matrix composites and AC8A alloy exhibited different aspects. Wear loss of AC8A alloy increased with sliding velocity linearly. whereas metal matrix composites indicated more wear loss than AC8A alloy at slow velocity region, however a transition point of wear loss was found at middle velocity region which show the minimum wear loss, and wear loss at high velocity region exhibited nearly same value with slow velocity region. In terms of wear mechanism, the metal matrix composites exhibited the abrasive wear at slow to high sliding velocity generally, however AC8A alloy showed abrasive wear at low sliding velocity and adhesive and melt wear at high sliding velocity.