• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.6
• /
• pp.472-479
• /
• 2002

Since $Br^{\circ}anemark$ introduced the osseointegrated implants, they have been granted for useful methods for the restoration of oral function. The original $Br^{\circ}anemark$ protocol recommended long stress-free healing periods to achieve the osseointegration of dental implants. However, many clinical and experimental studies have shown that the osseointegration is no wonder in almost cases and that early and immediate loading may lead to predictable osseointegration. So we are willing to introduce the Satellite Abutment newly invented for immediate loading. We think that it will make the occlusal forces dispersed to surrounding bone and that we can restore the oral function immediately after implant installation not disturbing osseointegration. In case of using Satellite abutment, stress concentrated to bone contact area of implant was distributed not only fixation plate and screws but also superior, middle portion of implant and cortical layer of jaw bone. It was clearly decreased on the bone contact surfaces around dental implants. 1. Stress was decreased more than 76.5% when satellite straight abutment was used. 2. Stress was decreased more than 50% when satellite angled abutment was used. 3. The stress around dental implant was well distributed along the cortical bone surface and the fixation plate and screw. This study concludes that satellite abutment can be used as all immediate loading implant prothesis because it was possible to distribute periimplant occlusal stress through implant contact bone surface and cortical layer of jaw bone.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.2
• /
• pp.151-155
• /
• 2010

Primary hepatic lymphoma is extremely rare, representing less than 1% of all extranodal lymphomas. We report MR imaging features and pathologic correlation of a case of primary hepatic lymphoma. MR images showed a large lobulated mass with gradual contrast enhancement, resembling intrahepatic cholangiocarcinoma. However, both hepatobiliary phase image obtained 20 minutes after injection of hepatocyte specific contrast agent and diffusion-weighted image demonstrated characteristic three layered pattern representing viable lymphoma in the outer layer, tumor necrosis in the middle layer and necrotic hepatic parenchyma in the center.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2008

In this paper, we fabricated pressure difference type gas flow sensor using only dry etching technology by ICP-RIE(inductive coupled plasma reactive ion etching). The sensor's structure consists of a common shear stress type piezoresistive pressure sensor with an orifice fabricated in the middle of the sensor diaphragm. Generally, structure like diaphragm is fabricated by wet etching technology using TMAH, but we fabricated diaphragm by only dry etching using ICP-RIE. To equalize the thickness of diaphragm we applied insulator($SiO_2$) layer of SOI(Si/$SiO_2$/Si-sub) wafer as delay layer of dry etching. Size of fabricated diaphragm is $1000{\times}1000{\times}7\;{\mu}m^3$ and overall chip $3000{\times}3000{\times}7\;{\mu}m^3$. We measured the variation of output voltage toward the change of gas pressure to analyze characteristics of the fabricated sensor. Sensitivity of fabricated sensor was relatively high as about 1.5mV/V kPa at 1kPa full-scale. Nonlinearity was below 0.5%F.S. Over-pressure range of the fabricated sensor is 100kPa or more.

• Journal of Aquaculture
• /
• v.10 no.4
• /
• pp.457-462
• /
• 1997

During the period of the Cochlodinium polykrikoides red tide occurrence in the southern coast of Korea in 1997, we obseved the vertical migration of red tide organisms in situ, along with environmental factors such as water temperature, dissolved oxygen, pH, chlorophyll $\alpha$ and nutrients for practical application of loess suspension techniques ot diminish fisheries damage. To cope with serious outbreaks of red tide of C. polykrikoides, the finfish culturists resorted with loess suspension to disperse the bloom watermass by turning around it with fishing boats in full speed. Peak in afternoon the cell numbers were diminished in the surface layer after sunset red tide organisms settled down in the middle and bottom layer progressively again after sunrise. Chlorophyll $\alpha$ and dissolved oxygen showed the same trends of variation with the cell number. In the course of controlling the red tide with loess suspension we could not find any severs oxygen deficiency to kill the culture species.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.16 no.1
• /
• pp.13-26
• /
• 1988

^x This study was executed to analyze the vegetational landscape structure of Donggu Royal Tomb forest by four kinds of ordination techniques(polar, principal component analysis, reciprocal averaging, and detrended correspondence analysis) and comparison of the couple photographs between 1920s and 1987. Thirteen sites were sampled with clumped sampling method in June of 1987 and five quadrats were examined in each site. The result of this study can be summarized as follows. 1. Environmental impact grade 3,4 and 5 area covered 16.11ha and these area should be restored by the input of human energy because self - refair seemed to be impossible. 2. Pinus densiflora community of actual vegetation covered 8.2%, Alnus japonica community 5.7% and quercus aliena community 15.8% of the surveyed area(73.3ha). And afforested vegetation including Pinus koraiensis, Pinus rigida, Alnus hirsuta and Robinia pseudoacacia covered 27.0%. 3. Donggu Royal Tomb forest was divided by Pinus densiflora, P. densiflora-Quercus aliena, Alnus japonia - Q. aliena and A. japonica community. DCA was the most effective method of this study. 4. DCA ordination were showed that succesional trends of tree species seem to be from Pinus densiflora through Prunus sargentii, Quercus serrata, Quercus aliena to Carpinus laxiflora in P. densiflora community and from Alnus japonica through Acer ginnala to Q. aliena in A. japonica community of the upper layer and from Rosa multiflora, Symplocos chinensis for. pilosa, Zanthoxylum schiniflolium through Rhus trichocarpa, Styrax japonica, Rhododendron scilippenbachii to Viburum erosum, Lindera obtusiloba in the middle layer. 5. By the comparsion of the couple photographs beween 1920s and 1987, we can recognize the change of historical landscape composed by P. densiflora and A. japonica community and those community is succeed to Q. aliena.

• Journal of Broadcast Engineering
• /
• v.13 no.2
• /
• pp.261-273
• /
• 2008

Multimedia service whose use is rapidly increasing supports effective services to convert and transmit multimedia data based on network speed, noise circumstance, terminal computation, and type of contents for satisfying QoS. For supporting information protection of multimedia service, it offers middle level of singular security service or security mechanism which is based on policy of service provider, depending on present terminal computation and type of contents. It can support security mechanism for more effective multimedia service, if we study security of application layer and network layer for supporting multimedia service. In this paper, we propose Multimedia security framework reflected on quantitative analysis of the WLAN(Wireless Local Area Network) mesh network security using the utility function in the level of the sorority, violation and addictive compensation model.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.1
• /
• pp.42-47
• /
• 2010

Polymer insulating materials such as cross linked polyethylene (XLPE) are employed in electric cables used for extra high voltage. These materials can degrade due to chemical, mechanical and electric stress, possibly caused by voids, the presence of extrinsic materials and protrusions. Therefore, this study measured discharge patterns, discharge phase angle, quantity and occurrence frequency as well as changes in XLPE under different temperatures and applied voltages. To quantitatively analyze the irregular partial discharge patterns measured, the discharge patterns were examined using a statistical program. A three layer sample was fabricated, wherein the upper and lower layers were composed of non-void XLPE, while the middle layer was composed of an air void and copper particles. After heating to room temperature and $50^{\circ}C$ and $80^{\circ}C$ in silicone oil, partial discharge characteristics were studied by increasing the voltage from the inception voltage to the breakdown voltage. Partial discharge statistical analysis showed that when the K-means clustering was carried out at 9 kV to determine the void discharge characteristics, the amount discharged at low temperatures was small but when the temperature was increased to $80^{\circ}C$, the discharge amount increased to be 5.7 times more than that at room temperature because electric charge injection became easier. An analysis of the kurtosis and the skewness confirmed that positive and negative polarity had counterclockwise and clockwise clustering distribution, respectively. When 5 kV was applied to copper particles, the K-means was conducted as the temperature changed from $50^{\circ}C$ to $80^{\circ}C$. The amount of charge at a positive polarity increased 20.3% and the amount of charge at a negative polarity increased 54.9%. The clustering distribution of a positive polarity and negative polarity showed a straight line in the kurtosis and skewness analyses.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.5
• /
• pp.72-79
• /
• 2000

On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard. Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and cockling tendency, and provides the necessary information to fine-tune the manufacturing process for optimum quality. Many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, being beyond the measurement range of the traditional instruments or resulting inconveniently long measuring time per sample. The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, non-leaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layers of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow n well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. Hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly as planned (having even small measurement error or malfunction), the process control will set the machine to operate away from the optimum, resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.41-48
• /
• 2010

An optical method was introduced to investigate the dispersion stability of Saengshik beverages (SB) containing 3.7-11.7% Saengshik powder (SP). Time course changes in backscattering light flux (BSLF) from SB were monitored by a Turbiscan. BSLF in the bottom and top layers of SB increased by forming sediment and foam, respectively, while that in the middle layer decreased by clarifying. With SP levels, sedimentation in SB was retarded, but the height of total sedimentation layer was increased. A logarithmic model was developed to fit to the changes in BSLF with time, showing determination coefficients of 0.979-0.988. The levels of SP in SB influenced the migration speed of the clarification front as well as the numbers of separated layers; 2 layers in SB containing 3.7% SP, 3 in 5.7-9.7%, and 4 in 11.7%. Formation of clear layers started after 17-29 min and continued for 22-53 min. The clarification was retarded most in SB containing 7.7% SP, indicating the most stable SP level for the SB preparation.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.291-300
• /
• 2017

Quantum-dot cellular automata(QCA) is a computing model designed to be similar to cellular automata, and an alternative technology for next generation using high performance and low power consumption. QCA is undergoing various studies with recent experimental results, and it is one of the paradigms of transistors that can solve device density and interconnection problems as nano-unit materials. An XOR gate is a gate that operates so that the result is true when either one of the logic is true. The proposed XOR gate consists of five layers. The first layer consists of OR gates, the third and fifth layers consist of AND gates, and the second and fourth layers are designed as passages in the middle. The half adder consists of an XOR gate and an AND gate. The proposed half adder is designed by adding two cells to the proposed XOR gate. The proposed half adder consists of fewer cells, total area, and clock than the conventional half adder.