• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.6
• /
• pp.49-55
• /
• 2003

Total phosphorous removal rate was examined of a subsurface-flow treatment wetland system which was constructed on floodplain in the down reach of the Kwangju Stream in Korea from May to June 2001. Its dimensions were 29 meter in length, 9 meter in width and 0.65 meter in depth. A bottom layer of 45 cm in depth was filled with crushed granite with about 15~30 mm in diameter and a middle layer of 10 cm in depth had pea pebbles with about 10 mm in diameter. An upper layer of 5 cm in depth contained course sand. Reeds(Phragmites australis) were transplanted on the surface of the system. They were dug out of natural wetlands and stems were cut at about 40 cm height from their bottom ends. Water of the Kwangju Stream flowed from a submerged dam into it via a pipe by gravity flow and treated effluent was funneled back into the Stream. The number of reed stems increased from 80 stems/$m^2$ in July 2001 to 136 stems/$m^2$ in September 2001. The hight of stems was 44.2 cm in July 2001 and 75.3 cm in September 2001. The establishment of reeds at early operating stage of the system was good. Volume and water quality of inflow and outflow were investigated from July 2001 through December 2001. The average inflow was 40 $m^3$/day and hydraulic detention time was about 1.5 days. The concentration of total phosphorous n influent and effluent was 0.83 and 0.33 mg/L, respectively. The removal rate of total phosphorous averaged about 60%. The removal efficiency was slightly higher, compared with that of subsurface-flow wetlands operating in North America, whose retention rate of total phosphorous was reported to be about 56%. The good abatement rate could be attributed to sedimentation of particle phosphorous in pores of the media and adsorption of phosphorous to the biofilm developed on the surface of them. Increase of standing density of reeds within a few years will develop root zones which may lead to increment in the phosphorous retention rate.

• Applied Microscopy
• /
• v.11 no.1
• /
• pp.11-19
• /
• 1981

Testis of Pieris rapae L. was observed by using light microscope and electron microscope. The results were as follows 1. Pieris rapae L. possesses a ovoid single testis colored red. 2. Peritoneal sheath consists of three layers; outer cuticular layer, middle filamentous layer, inner layer with no filaments. 3. Follicles enclosed by peritoneal sheath are compacted by the folds of the. epithelium of follicle. They are opened together toward the duct of vas deferens. 4. Epithelium of follicle have high electron density and contain needle shaped structures and glycogen. Tracheoles are extended into the epithelium of follicle. 5. Cyst cells have a irregular shaped nucleus and cell organelles are abundant in cytoplasm. 6. Typical acrosomes were not observed, but the other structure smillar to the acrosome of the other insect or vetebrate were observed. 7. After releasing the sperm bundle, cyst cells seem to be autolyzed.

• Journal of Environmental Health Sciences
• /
• v.37 no.2
• /
• pp.141-149
• /
• 2011

This study aimed for developing a two stage dual media filtration system. It has a sand and activated carbon layer above the under-drain system, and a sand layer above the middle-drain system for pretreatment. When retrofitting an old sand filter bed or designing a new one, this technology can substitute the existing sand filter bed without requiring a new plant site. The removal rate of total particle is 93, and 3~7 ${\mu}m$ and 5~15 ${\mu}m$ particles are all 97%. These high removal efficiencies of each pollutant due to adsorption and biological oxidation in activated carbon filter layer. The best backwashing method of two stage dual media filtration system is ascertained by air injection, air + water injection and water injection sequence. In this study, a pilot plant of two stage and dual filtration system was operated for 4 months in water treatment plant. The stability of turbidity was maintained below 1 NTU. The TOC, THMFP and HAAFP were removed about 90% by two stage and dual media filtration system, which is almost 2 times higher than existing water treatment plant.

• The Korean Journal of Ecology
• /
• v.25 no.1
• /
• pp.33-39
• /
• 2002

Objectives of this study are to make clear the vegetation structure of Hovenia dulcis community in the Korean Peninsula over ten mountains including 17 plots. The results were summarized as follows. Habitat of the community indicated that elevation ranged from 115 meter to 720 meter at the sea level, slope aspect in nearly all directions, bare rock from 0 to 90 percent, slope degree from 10$^{\circ}$ to 40$^{\circ}$, topography from valley to middle slope, the height of tree layer from 8m to 22m, the diameter at breast height from 12cm to 59cm and coverage from 65% to 95$\%$$\%$

• Journal of Information Display
• /
• v.10 no.3
• /
• pp.111-116
• /
• 2009

In this paper, a plasma-assisted patterning method for the organic layers of organic light-emitting diodes (OLEDs) and its effect on the OLED performances are reported. Oxygen plasma was used to etch the organic layers, using the top electrode consisting of lithium fluoride and aluminum as an etching mask. Although the current flow at low voltages increased for the etched OLEDs, there was no significant degradation of the OLED efficiency and lifetime in comparison with the conventional OLEDs. Therefore, this method can be used to reduce the ohmic voltage drop along the common top electrodes by connecting the top electrode with highly conductive bus lines after the common organic layers on the bus lines are etched by plasma. To further analyze the current increase at low voltages, the plasma patterning effect on the OLED performance was investigated by changing the device sizes, especially in one direction, and by changing the etching depth in the vertical direction of the device. It was found that the current flow increase at low voltages was not proportional to the device sizes, indicating that the current flow increase does not come from the leakage current along the etched sides. In the etching depth experiment, the current flow at low voltages did not increase when the etching process was stopped in the middle of the hole transport layer. This means that the current flow increase at low voltages is closely related to the modification of the hole injection layer, and thus, to the modification of the interface between the hole injection layer and the bottom electrode.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.1
• /
• pp.30-36
• /
• 2006

In this paper, we proposed the system that supports underachievers realm decision of Korean language curriculum in the middle school. Learning disability and stagnation should be minimized by using and applying the proposed system. The input layer of the system contains 36 variables, which can be specific items in the Koran language curriculum. The variables are encoded with the specific coding schemes. The number of nodes in the hidden layer was determined through a series of learning stage with best result. We assigned 4 neurons, which correspond to one realm of the curriculum to output layer respectively. We used the multilayer perceptron and the error backpropagation algorithm to develope the system. A total of 2,008 data for training and 380 for testing were used for evaluating the performance.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.3
• /
• pp.19-27
• /
• 2001

In this seismic analyses of structures, it is well recognized that the effects of soil-structure interaction can not be ignored and seismic responses of a structure taking into account the stiffnesses of a foundation-soil system show the significant difference from those with a rigid base. However, current seismic analyses of apartment building structures were carried out with the rigid base ignoring the characteristics of the foundation and the properties of the underlying soil. In this study, seismic analyses of wall-slob type apartment buildings which have a particular structural type were carried out taking into account the soft soil layer comparing seismic response spectra of a flexible base with those of a rigid base and UBC-97. Low-rise or middle height wall-slab type apartment buildings built on the deep soft soil layer showed a rigid body motion with the reduced seismic responses due to the base isolation effect, indicating that it is considerably safe but uneconomical to utilize the design spectra of UB-97 for the seismic design of wall-slab type apartment buildings due to conservative design.

• Applied Microscopy
• /
• v.25 no.3
• /
• pp.63-74
• /
• 1995

The development of pale chub oocyte from the immature oogonium to mature oocyte was investigated by light and electron microscope. The cytoplasm of pale chub oogonia was acidic and many vesicles were located at inner side of nuclear membrane. In primary oocytes, yolk vesicles were distributed in cytoplasm. Also, fibrous materials and protuberances were distributed on the surface of zona radiata. The nucleus of secondary oocyte was enlarged and yolk vesicles in cytoplasm migrated to zona radiata. In early egg, yolk mass are formed and yolk vesicles were located at inner side of zona radiata. Three-layered zona radiata was about $3{\mu}m$ in thickness. The three layers were an outer fibrous material layer, a middle nurse cell layer in which microvilli of early egg cytoplasm contact with processes of nurse cells, and an inner layer with high electron density. In mature egg, euchromatin and a germinal vesicle were developed, mitochondria, free ribosomes, and yolk mass were distributed in cytoplasm. But, yolk vesicles were disappeared. Specially, zona radiata of matured eggs were better thin than the one of immature eggs In conclusion, it is summerized that the oogenesis of pale chub were the increase of cell size, the formation and accumulation of yolk, the decrease in nucleat electron density, changes of zona radiata, and the development of microvilli.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.7-23
• /
• 1990

The success or failure of endosseous dental implants is related to the cellular activity at the implant surface. Success seems to be associated with the enclosure of the implant in a non-inflammed connective tissue or the formation of a direct bone implant interface. The purpose of this study was to examine the tissue reactions to the various implants at the submergible state in dog mandible. The $Br\"{a}nemark$, Core-Vent, Intergral, Bone spiral were selected for evaluation and also the Kimplant, Nephrite were used for the experimental study. After 4 months the animals were sacrificed. The interface zone between bone and implant was investigated using x-rays, light microscope, scanning electron microscope, transmission electron microscope. The following results were obtained from this study. 1. $Br\"{a}nemark$, Core-Vent, Kimplant, Integral showed no mobility and bone growth over the healing screws of the implants. Histologically most of the implant surface were covered by remodelled lamellar bone, and partly by a cellular layer or the thin fibrous tissue layer. 2. The Bone spiral showed no mobility and partially radiolucent line around the implant. The upper part of the implant was surrounded by a thin fibrous connective tissue and the middle, apical part of it were contacted with bone directly. 3. The Nephrite implant showed severe mobility and a radiolucent line around the implant. Histologically it showed mild inflammation and was surrounded by a fibrous connective tissue. 4. Scanning electron microscope showed that there was no amorphous ground substance in the Nephrite implant but the formation of ground substance over the collagen filaments in other implants. 5. Transmission electron microscope showed that collagen filaments were approached irregularly to the surface of all implants and in the $Br\"{a}nemark$, Core-Vent, Kimplant, Integral there was amorphous layer between the implant and the collagen filaments. It seemed to be ground substances.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.10
• /
• pp.1514-1519
• /
• 2001

This paper is concerned with design, manufacturing and performance test of LIPCA ( Lightweight Piezo- composite Curved Actuator) using a top carbon fiber composite layer with near -zero CTE(coefficient of thermal expansion), a middle PZT ceramic wafer and a bottom glass/epoxy layer with high CTE. The main point of this design is to replace the heavy metal layers of THUNDER by thigh tweight fiber reinforced plastic layers without losing capabilities to generate high force and large displacement. It is possible to save weight up to about 30% if we replace the metallic backing material by the light fiber composite layer. We can also have design flexibility by selecting the fiber direction and the size of prepreg layers. In addition to the lightweight advantage and design flexibility, the proposed device can be manufactured without adhesive layers when we use epoxy resin prepreg system. Glass/epoxy prepregs, a ceramic wafer with electrode surfaces, and a graphite/epoxy prepreg were simply stacked and cured at an elevated temperature (177 $^{circ}C$ after following an autoclave bagging process. It was found that the manufactured composite laminate device had a sufficient curvature after detached from a flat mold. The analysis method of the cure curvature of LIPCA using the classical lamination theory is presented. The predicted curvatures are fairly in agreement with the experimental ones. In order to investigate the merits of LIPCA, a performance test of both LIPCA and THUNDE$^{TM}$ were conducted under the same boundary conditions. From the experimental actuation tests, it was observed that the developed actuator could generate larger actuation displacement than THUNDERT$^{TM}$.