• Journal of Plant Biology
• /
• v.33 no.1
• /
• pp.65-72
• /
• 1990

An anatomical study was conducted in order to elucidate the development of primary and secondary ray in Robinia pseudoacacia L. The height of primary ray near pith decreases progressively toward periphery, while the width and number per unit area gradually increase, and then the height, width and number remain somewhat constant. Secondary ray originates from the segmentation of fusiform initials or division of the side or end of fusiform initials at the middle of the first growth layer. And after the height and width of secondary ray increases to some extent, it remains constantly.

• KSBB Journal
• /
• v.7 no.4
• /
• pp.252-257
• /
• 1992

A flat-type membrane bioreactor(FMBR ) for aerobic whole cell immobilization was developed and its performance for the citric acid production was investigated using Aspergillus niger (KCTC 1232). The reactor consisted of three layers. The top layer contained flowing air for oxygen supply, the middle layer had stationary cells, and the bottom layer had flowing aqueous nutrients. The initial pH of the culture medium played an important role in citric acid production and the lower initial pH of the culture medium resulted in a higher citric acid yield. Under air and pure oxygen aerations the volumetric productivity reached 0.20 and 0.40g/Lh. Furthermore, the productivity improved with the increase of the culture medium feed rate.

• The Journal of the Korean dental association
• /
• v.9 no.4
• /
• pp.157-160
• /
• 1971

To compare the effects of various pulp capping agents that are usually applied to human pulp tissue, adult dogs were bred for a certain period and each capping agent was applied experimentally to pulp tissue after vital pulpotomy. Histological observations are as follows. 1) In comparison between methods of vital pulpotomy, one and two appointment method, different courses of healing were observed. In one appointment method, the granulation tissue formation at the amputation sur face of pulp tissue had a tendency to be transformed to scar tissue formation. In two appointment method, more transformation than that of one appointment method from scar tissue to dentin matrix formation were observed. 2) Histologic changes that have appeared in pulp tissue are a) fixation at outer layer b) degeneration at middle layer c) hyperemia and round cell infiltration at inner layer 3) With use of formocresol mixed zinc oxide powder in two appointment method complete formation of dentin matrix were observed. 4) Among the methods and aagents described above formocresol mixed zinc oxide powder in two appointment method appeared to be relatively effective.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.3
• /
• pp.93-109
• /
• 2012

The purpose of this study is to examine the modern men's fashion coordination to see the image in the center of TV dramas in terms of Habitu that is formed within hierarchy and class. The subjects range is included fashion style, color, accessories, hairstyle and appearance. 950 pictures used in the analysis sheet. In research methods, content analysis and basic statistics were used. The results of this study were as follows. First, the hierarchy image formed by Habitus is significant difference. The upper layer is coordinating elite luxurious and prestigious image of the fashion styles. The middle layer is coordinating neat and capable image. The lower layer does not care about the appearance and image appearing weary life is coordinating. Second, the class image formed by Habitus, CEO often interests in fashion image coordination. Senior executive is represented clean and luxurious image. General white color dresses in a suite such as office look. Blue color does not care about the fashion coordination and is expressed an easy dress for labor. Architects of the unstructured free-spirited image is represented. Physician and resident physician dress in shirts, no pattern tie, pants, robe. And they is coordinating neat and tidy attire to represent professional and reliable image.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.1
• /
• pp.39-50
• /
• 1993

The purpose of this study was to describe the micromorphological changes in Korean red pine (Pinus densiflora S. et Z.) wood decayed by a major brown-rot fungus, Lentinus lepideus, using scanning electron microscope and transmission electron microscope. At the end of the 12-week exposure to the fungus in soil block procedure(ASTM 1971), test blocks sustained 5.02% weight loss. The formation of bore hole by hyphae and penetration of hyphae through bordered pit were not observed. Instead, fungal hyphae appeared to penetrate axially tracheid luminar from the the ray cells via cross field pits. Hyphae were mainly found in lignin rich cell corner regions of tracheids, and also extensive degradation of tracheid wall occurred in this region. Extensive degradation of $S_2$ layer occurred without noticeable alteration of the $S_3$ layer, but warty layer and compound middle lamella remained relatively intact. Localized erosion, the characteristic of white rot, was observed in some cell wall and wall components including lignin were found to be decomposed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.5
• /
• pp.963-968
• /
• 1999

This study was tried to evaluate possibilities for discriminating the mixture degree of wheat flour from buckwheat products. Buckwheat was milled into four grades of powder, i.e. whole grain flour (WGF), inner layer flour(ILF), middle layer flour(MLF) and outer layer flour(OLF)), and these powders were mixed with wheat flour(WF) to make mixed samples. Ash, protein and fat contents of the buckwheat flours were high in the order of OLF=WGF>MLF>ILF. On the other hand, WF showed a similar content to OLF in ash and protein, and to ILF in fats. Potassium and magnesium contents were higher in all the buckwheat powder than in the wheat flour. Flavonoid contents were higher in order of OLF>WGF=MLF> ILF, but it was not in wheat flour. Although the reliable correlation between mix ratio and components, i.e. mag nesium or ash analyzed were found, it did not seem to reflect sufficiently the expected variations of contents of original material components. Also, compositions of commercial buckwheat products were analyzed to evaluate the mixed ratio of buckwheat flour and wheat flour. The results suggest that the components analyzed in this study as putative marker were not good in determining whether or how much buckwheat products contained wheat flour.

• Journal of Hydrogen and New Energy
• /
• v.23 no.1
• /
• pp.8-18
• /
• 2012

This paper presents a three-dimensional, transient cold-start polymer electrolyte fuel cell (PEFC) model to numerically evaluate the effects of membrane electrode assembly (MEA) design and cell location in a PEFC stack on PEFC cold start behaviors. The cold-start simulations show that the end cell experiences significant heat loss to the sub-freezing ambient and thus finally cold-start failure due to considerable ice filling in the cathode catalyst layer. On the other hand, the middle cells in the stack successfully start from $-30^{\circ}C$ sub-freezing temperature due to rapid cell temperature rise owing to the efficient use of waste heat generated during the cold-start. In addition, the simulation results clearly indicate that the cathode catalyst layer (CL) composition and thickness have an substantial influence on PEFC cold-start behaviors while membrane thickness has limited effect mainly due to inefficient water absorption and transport capability at subzero temperatures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.273-278
• /
• 2000

In order to study effects of interface layers between PZT films and electrodes for MFM(Metal-Ferroelectric-Metal) structure capacitors, we have fabricated the capacitors with the Pt/PZT/interface-layer/Pt/$TiO_2/SiO_2/Si$ structure. $PT(PbTiO_3)$ interface layers were formed by sol-gel deposition and PbO, $ZrO_2$ and $TiO_2$ thin layers were deposited by reactive sputtering. $TiO_2$ interface layers result in the finest grains of PZT films compared to $PbO_2$ and $ZrO_2$ layers. On the other hand, PT interface layers result in improved morphology of PZT films and do not significantly change ferroelectric properties. It is also observed that seed layers at the middle and top of PZT films do not give significant effects on grain size but the PT seed layer at the interface between the bottom electrode and the PZT films results in the small grain size.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3E
• /
• pp.69-76
• /
• 2008

Measurements of bubble size and distribution in the surface layer of the sea, wind speed, and variation of ocean environments were made continually over a four-day period in an experiment conducted in the South Sea of Korea during 17-20 September 2007. Theoretical background of bubble population model indicates that bubble population is a function of the depth, range and wind speed and bubble effects on sound speed shows that sound speed varies with frequency. Observational evidence exhibited that the middle size bubble population fit the model very well, however, smaller ones can not follow the model probably due to their short lifetime. Meanwhile, there is also a hysteresis effect of void fraction. Observational evidence also indicates that strong changes in sound speed are produced by the presence of swarms of micro bubbles especially from 7 kHz to 50 kHz, and calculation results are consistent with the measured data in the high frequency band, but inconsistent in the low frequency band. Based on the measurements of the sound speed and high frequency transmission configuration in the bubble layer, we present an estimation of underwater acoustic channel capacity in the bubble layer.

• Korean Journal of Environmental Biology
• /
• v.17 no.1
• /
• pp.95-115
• /
• 1999

The dynamics of phytoplankton community in Lake Imha and its tributaries was investigated at nineteen stations in August and September 1996. A total of 171 taxa ［171 species (including 1 forms and 27 varieties),66 genus, 25 families, 6 suborders, 13 orders and 6 class］ were identified. The standing crops of phytoplankton ranged from $47.35{\times}10^3 to 184.65{\times}10^3 individuals/ml in surface layer, 1.08{\times}10^3~54.33{\times}10^3 individuals/ml in middle layer and 0.69{\times}10^3~115.85{\times}10^3individuals/ml$ in low layer. Dominant species determined by standing crops of each species were Oocystis lacustris, Elakatothrix gelatinosa, Aulacoseira ambigua, and Synedra acus, however, the most species dominated from 1992 to 1994 disappeared.