• Journal of Environmental Science International
• /
• v.17 no.5
• /
• pp.479-484
• /
• 2008

The application of microwave technology has been investigated in the remediation of diesel-contaminated soil. The paper deals with economic assessment by means of cost analysis and degradation characteristics at different microwave powers for total petroleum hydrocarbon (TPH) in diesel contaminated soils. The soils from S Mountain around the D University were sampled. The samples were screened with 2.0 mm mesh and dried for 6 hours before the diesel was added into the dried soils. The diesel-contaminated soil (3,300 mg THP/kg soil) was prepared with diesel (S Co.). The drying process was carried out in a microwave oven, a standard household appliance with a 2,450 MHz frequency and 700 W of power. The experiments were conducted from 0 to 20 minutes as the microwave powers increased from 350W to 500W to 700W. The concentrations of TPH were analysed using a gas chromatography/mass spectrometer (GC/MS). The initial concentration of TPH was 3,300 mg TPH/kg soil. The weight of contaminated soil was 200g. The concentration of TPH was decreased to 1,828 mg TPH/kg soil (44.7%), 1,347 mg TPH/kg soil (59.2%) and 1,014 mg TPH/kg soil (69.3%) at 350W, 500W and 700W for 15 minutes respectively. In addition, the curve was best fit with first order kinetics using the least-square method. The ranges of a first order rate constant k and r-square were $0.0298{\sim}0.0375min^{-1}$ and $0.9373{\sim}0.9541$ respectively.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.5
• /
• pp.394-401
• /
• 2017

PURPOSE. The purpose of this study was to compare the optical properties of pre-colored dental monolithic zirconia ceramics of various thicknesses sintered in a microwave and those in a conventional furnace. MATERIALS AND METHODS. A2-shade of pre-colored monolithic zirconia ceramic specimens ($22.0mm{\times}22.0mm$) in 3 thickness groups of 0.5, 1.0, and 1.5 mm were divided into 2 subgroups according to the sintering methods (n=9): microwave and conventional sintering. A spectrophotometer was used to obtain CIELab color coordinates, and translucency parameters and CIEDE2000 color differences (${\Delta}E_{00}$) were measured. The relative amount of monoclinic phase ($X_m$) was estimated with x-ray diffraction. The surface topography was analyzed by atomic force microscope and scanning electron microscope. Statistical analyses were conducted with two-way ANOVA (${\alpha}=.05$). RESULTS. There were small interaction effects on CIE $L^*$, $a^*$, and TP between sintering method and thickness (P<.001): $L^*$ (partial eta squared ${{\eta}_p}^2=0.115$), $a^*$ (${{\eta}_p}^2=0.136$), and TP (${{\eta}_p}^2=0.206$), although higher $b^*$ values were noted for microwave sintering regardless of thickness. Color differences between two sintering methods ranged from 0.52 to 0.96 ${\Delta}E_{00}$ units. The $X_m$ values ranged from 7.03% to 9.89% for conventional sintering, and from 7.31% to 9.17% for microwave sintering. The microwave-sintered specimen demonstrated a smoother surface and a more uniform grain structure compared to the conventionally-sintered specimen. CONCLUSION. With reduced processing time, microwave-sintered pre-colored dental monolithic zirconia ceramics can exhibit similar color perception and translucency to those by conventional sintering.

• Food Science of Animal Resources
• /
• v.28 no.3
• /
• pp.295-300
• /
• 2008

This study was carried out to elucidate the relationship between different fat levels (0%, 5%, 10%, 15%, 20%, and 25%) and the quality of ground pork patties cooked to reach an internal temperature of $75^{\circ}C$ in a microwave oven. The relationship between fat level and cooking rate of pork patties cooked by microwave energy was highly significant ($R^2=0.72$), and had a low determination coefficient ($R^2=0.55$). The relationship between fat level and total cooking loss of pork patties cooked by microwave energy was also very significant, with a high correlation coefficient of $R^2=0.89$. The correlation coefficient between fat level and cooking drip loss of patties cooked by microwave energy was 0.92, which was highly significant. Although the correlation coefficient between fat level and evaporation loss had a negative value ($R^2=-0.63$), there was a highly significant relationship between fat level and shear force of pork patties cooked by microwave energy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.6023-6028
• /
• 2013

Recently, biodegradable polymers are gaining more and more attention due to international environmental issues. Succinic acid is synthesised by chemical process of hydrogenation. Succinic acid synthesized has certain amount water content. To remove the water contained in succinic acid is used generally by hot air drying process. But recently, microwave drying process having the advantage of shortening the drying time and uniform drying of product are gaining more attention. In this study, hot air drying and microwave drying efficiency were compared at drying process. In addition, we confirmed commercial applicability in microwave drying process of succinic acid. Microwave drying process has higher efficiency than 70% compared with hot air drying process at thickness of 1cm. Economic efficiency were compared through examination of power consumption for complete drying of succinic acid at microwave and hot air dyring.

• Korean journal of food and cookery science
• /
• v.20 no.6 s.84
• /
• pp.643-649
• /
• 2004

Pork was cooked using three kinds of instrument [electric pill (EG) for 5min., microwave oven (MW) for 6min. and reheated using a MW] and then extracted with $80\%$ methanol. The Ames test was performed on the methanol extracts, employing the S. typhimurium tester strain, TA100. The methanol extract of cooked pork showed high mutagenicity ion the 5.0 mg/plate without the S9 mix, but a higher mutagenicity was induced with the S9 mix With increasing refrigeration $(4^{\circ}C)$ and freezing $(-18^{\circ}C)$ periods the extracts showed higher mutagenicities and TBA values, and the same results where shown with reheating. Correlations of the mutagenicity (-S9 mix) and rancidity of the pork cooked by EG, according to storage at and $-18^{\circ}C$ and reheated by MW (1 min), were r=0.85, 0.86, 0.98 and 0.83, respectively. When the MW was used for reheating, the refrigeration storage (r=0.98) showed a higher correlation coefficient than for that stored frozen (r=0.83). From the structure of cooked pork, as observed by SEM, many vapor pathways were viewed in the pork reheated using themicrowave oven.

• Journal of the Korean Home Economics Association
• /
• v.23 no.3
• /
• pp.55-61
• /
• 1985

This study was designed to find out the optimum processing condition and the characteristics of yeots : In this study, Yeoteses were made from glutinous rice, Rice, Millet, Sorghum and Corn by microwave oven. The textural parameters of various Yeotses were determined by sensory evaluation and Rheometermeasurement. RESULTS : 1. The sweetness of all the raw materials before saccharification is 11%. In case of the sweetness of the raw materials after saccharification, Glutinous rice was the highest(28.8%) and Corn was the lowest(17.7%). Also, the sweetness of Glutionous rice Yeots was the highest(86%) and Corn Yeots was the lowest(82.7%).It showed similar tendancy to the sensory evaluation for sweetness. 2. The pH of the raw materials before saccharification was 4.4.The pH of sorgphum after-saccharification was the highest (4.7) and that of Corn was the lowest (4.3). 3. In the sensory evaluation of the various Yeotses, Glutinous rice Yeots showed the best quality and it did not showed any significant difference between glutinous Yeots and Rice Yeots.The overalll quality of Milet, Sorghum and Corn Yeotses were inferior to Glutnous and Rice Yeotses. Textural characteristics by Rheometermeasurement revealed differences among the various Yeotses. Hardness, Cohesiveness, Adhesiveness were the highest in Glutinous rice and Rice Yeotses. Adhesiveness showed similar tendancy to that of the sensory evaluation. 4. However, Becuase glutinous rice is more expensive than rice, it is desirable that we use Rice Yeots.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.292-300
• /
• 1996

Hexavalent chromium($Cr^{+6}$) compounds are considered to be particularly hazardous, primarily because of the associated risk of allergic reaction and cancer. The analytic method of hexavalent chromium such as the s-diphenylcarba-zide(DPC) method and all ether previously used methods are often made uncertain due to significant interferences from organic components. This report can provide a technique for the more rapid and simple determination of total hexavalent chromium. than other currently using methods. The s-diphenylcarbazide method proposed by the U.S. National Institute for Occupational Safety and Health has low recovery rate(15.67 - 48.20%) due to interference, iron chloride and nickel chloride. A microwave oven technique has high recovery rate(about 70%) of insoluble hexavalent chromium. For the difference of ionic charges of $Cr^{+3}$-ethylenediamine tetraacetic acid(EDTA) chelate and $CrO_4{^{-2}}$, we could detect them simultaneously by ion exchanged high performance liquid chromatography. The confirmation of $Cr^{+3}$ and $Cr^{+6}$ were checked by fraction collector and flameless atomic absorption spectrometer. We observed that the small amount of hexavalent chromium is converted to trivalent chromium due to enhancement of chromium reduction by $Fe^{+3}$ or $Ni^{+2}$. As a result of this study, on the analysis of insoluble hexavalent chromium with microwave oven was used for, it may be better and more precise analysis after pretreatment by 2% NaOH-3% $Na_2CO_3$ and then analysis UV-spectrophotometer. It should be done for various studies on insoluble hexavalent chromium on the basis work environmental monitoring so called welding, painting etc.

• Food Science and Preservation
• /
• v.19 no.2
• /
• pp.201-208
• /
• 2012

The sensory properties of $Kalopanax$ $pictus$ and $Cedrela$ $sinensis$ shoots were analyzed according to their blanching conditions and the thawing methods used. For the Hunter colors, the $K.$ $pictus$ that was blanched without adding salt for 6 min had the highest L value, and the $C.$ $sinensis$ that was blanched with 1% salt for 6 min had the highest L value. The chlorophyll content of $K.$ $pictus$ was 141.1 mg% when it was blanched for 3 min with 2% salt, and the chlorophyll content of $C.$ $sinensis$ that was blanched without adding salt for 6 min was highest (124.8 mg%). When $K.$ $pictus$ and $C.$ $sinensis$ were blanched without salt addition for 3 min, their texture showed a higher value than that of the other samples. The sensory test result showed the highest overall preference for the sample that was blanched without adding salt for 3 min, among all the samples. The L value of the $K.$ $pictus$ that was thawed in a microwave oven was significantly higher than that of the other samples, but the L value of the $C.$ $sinensis$ that was thawed at $4^{\circ}C$ was higher than that of the other samples. As for the overall preference for the samples according to the thawing method used, $K.$ $pictus$ and $C.$ $sinensis$ scored highest in the case of thawing in a microwave oven.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.78-81
• /
• 1990

The Engquist-Majdas second-order Absorbing Boundary Conditions (ABC) has been combined with the finite element formulation replacing the boundary integral equations in the hybrid finite-boundary element method (HEM). The method is applied to electromagnetic field radiation problems, especially to the microwave launcher, in order to verify the finite element formulation with the ABC's. The results with ABC are in good agreement with those of HEM. In order to see the applicability of the ABC, a simplified microwave oven utilizing ABC and an absorbing material are provided. The EM field distribution of the model is visualized. This method could be a useful analysis and design tool for EM field devices.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.61-64
• /
• 1998

PZT ceramics were rapidly sintered in a 2.45GHz microwave oven without no addition of lead to the atmosphere and afterwards the piezoelectric properties were investigated. The specimens were sintered between 1050 and 1130$^{\circ}C$ with the sintering time totaling less then 20 minutes, reducing processing times and costs from those of established methods. The relative dielectric constant, mechanical quality factor and electro-mechanical coupling factor of the PZT specimens at 1090$^{\circ}C$ were 1990, 80,0.53 respectively, which is comparable to conventionally sintered values.