• Korean Journal of Agricultural Science
• /
• v.20 no.2
• /
• pp.181-188
• /
• 1993

Frozen korean traditional poultries(Manyker, Korean native fowl, Ogol fowl and Pheasant) were thawed at $5^{\circ}C$, and $20^{\circ}C$ in the air, and using a microwave oven. Effect of thawing methods on the quality of Korean poultry was investigated. The pH of the poultry muscle was lowered after thawing in all treatments. The pH of the muscle thawed by microwave oven was the lowest. The quantity of drip released after thawing was the least in a microwave thawing. The quantity of drip in Maniker and Pheasant was loss than Ogol fowl. The relationship between pH and water binding capacity showed highly significant, and the drip quantity after thawing increased as the pH decreased. Leg muscle has higher strength than breast muscle in all the Korean poultry. Shear strength of all the poultry muscle showed closely relative related to the pH. As the pH lowered, the shear strength of the muscle was also decreased.

• Journal of Biosystems Engineering
• /
• v.34 no.5
• /
• pp.371-376
• /
• 2009

Microwave digestion is a preferred pretreatment method for agricultural samples because of its quick chemical reaction and minimum loss of analytes. In this research, a feedback temperature controller was developed to control the temperature inside a vessel for the microwave-assisted digestion system. An existing industrial microwave oven was fitted with the temperature controller for controlling inside temperature of the vessel. Four control methods, On/Off, proportional (P), proportional integral (PI), and proportional integral derivative (PID) were used and compared. Experimental results showed that PID control produced best temperature control performance. The PID controller could maintain the temperature of water sample and rice sample in the digestion system with error range of $-2.5{\sim}3.3^{\circ}C$ and $-1.9{\sim}0.5^{\circ}C$ at set temperature of $170^{\circ}C$, respectively.

• Journal of the Korean Society of Safety
• /
• v.27 no.1
• /
• pp.63-69
• /
• 2012

Ready-mixed concrete(RMC) has been a major construction materials for infrastructures. However, RMC with poor quality is reported to be social issue since it directly user's safety and convenience. Because the properties of concrete as a construction material are greatly influenced by the variation of water content, to control water accurately is the most efficient method for the quality control in RMC industry. In this study, the automatic measurement technology of fine aggregate was developed by using the microwave moisture measurement. For the various conditions of fine aggregate such as moisture, temperature and pressure, the calibration curve of moisture measurement was obtained by using oven-dry method. From the infield and outfield test, it can be obtained that the accuracy of microwave moisture measurement is very high and the automatic system of microwave moisture measurement is very convenient and useful for quality control in RMC Industry.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.905-907
• /
• 2014

The plasma and microwave surface treatments of carbon nanotubes that loaded on plastic substrates were carried out with expecting a change of carbon nanotube dispersion by increasing treatment time. The microwave treatment process was undergone by commercial microwave oven (800 W). The electrical property was measured by hall measurement and resistance was increased by increasing $O_2$ flow rate of plasma, suggesting an improvement of carbon nanotube dispersion and a possibility of controlling the resistances of carbon nanotubes by plasma surface treatment. The resistance was increased in both polyethylene terephthalate and polyimide substrates by increasing $O_2$ flow rate. Resistance changes only slightly with different $O_2$ flow treatment in measure rho for all polyimide samples. Sheet resistance is lowest in polyimide substrate not due to high carbon nanotube loading but due to tendency to remain in elongated structure. $O_2$ or $N_2$ plasma treatments on both polyethylene terephthalate and polyimide substrates lead to increase in sheet resistance.

• Food Science of Animal Resources
• /
• v.36 no.4
• /
• pp.538-546
• /
• 2016

This study was carried out to evaluate the effects of fat level on the microwave cooking properties of ground pork patties with NaCl (1.5%). Ground pork patties were processed from pork hams to achieve fat levels of 10%, 15%, 20%, and 25%, respectively. Each patty was cooked from a thawed state to 75℃ in a microwave oven at full power (700 W). After microwave cooking, protein content, moisture content, fat retention, and shear force values in patties decreased as fat level increased from 10 to 25%. As fat level increased, cooking time decreased but total cooking loss and drip loss were increased, whereas slight differences in diameter reduction and thickness of patties were observed. In raw patties, 10% fat patties had lower L* values and higher a* values compared to patties with more fat, but these differences were reduced when patties were cooked. Patties with 10% fat showed a more pink color on the surface and interior than patties with a higher fat content but more air pockets were noted in higher-fat patties. Higher-fat patties were more tender, juicy, and oily than lower-fat patties.

• Advances in materials Research
• /
• v.2 no.3
• /
• pp.133-140
• /
• 2013

This paper aims to focus on the microwave processing of thick films which is a fast, cheap technique and could be the alternative to the currently used conventional high temperature processing technique. Microwave processing has gained worldwide acceptance as a novel method for heating and sintering a variety of materials, as it offers specific advantages in terms of speed, energy efficiency, process simplicity, finer microstructures and lower environmental hazards. Silver conducting thick films were prepared and processed in the household microwave oven. The films sintered at different time period by keeping the other parameter such as microwave power, film thickness etc constant. The microstructure analysis revealed that the surface morphology of the microwave processed films become compact with respect to the processing time. The sheet resistance for microwave sintered silver films is in the range of 0.003 to $1.207{\Omega}/{\Box}$ where as the films fired at 750 and $850^{\circ}C$ showed the resistance of 0.009 and $0.003{\Omega}/{\Box}$ which can be comparable. The results revealed that the microstructure of the microwave sintered films has more uniform and compact surface than that of the conventionally fired films. The paper reports upon the preparation of silver thick film by screen printing technique and processing the same by microwave which also compared with the conventionally processed thick films.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.654-658
• /
• 2000

Flavor components focused on the methyl pyrazines(2,3-dimethyl pyrazine, 2,3,5-trimethyl pyrazine, tetramethyl pyrazine) of microwave-roasted cocoa beans were determined and compared with those of conventionally-roasted cocoa beans. Domestic microwave oven was modified to design the microwave roasting system. Temperature measurement technique using thermocouple probes was developed to determine the center temperature of cocoa beans during microwave roasting. Microwave roasting was carried out under two different conditions. Under the first condition, roasting time was fixed to 30 min, while roasting temperature was varied to $110^{\circ}C,\;120^{\circ}C,\;130^{\circ}C,\;140^{\circ}C,\;and\;150^{\circ}C$ Under the second condition, roasting temperature was fixed to $130^{\circ}C$, while roasting time was varied to 5 min, 10 min, 20 min, and 30 min. Conventional roasting was done at $120^{\circ}C$ for 15 min as a reference. Amount of methyl pyrazines and their ratios were influenced by microwave roasting temperature and roasting time. The most suitable methyl pyrazine ratio of cocoa beans was obtained at $140^{\circ}C$ for 30 min of microwave roasting.

• Korean journal of food and cookery science
• /
• v.31 no.5
• /
• pp.534-543
• /
• 2015

Recently, the Tenebrio molitor larva was recognized as a novel food ingredient by the Ministry of Food and Drug Safety in Korea. Accordingly, we investigated its physical and sensory characteristics to establish the cooking conditions that may increase the demand of T. molitor larvae as a food. In this study, T. molitor larvae were cooked by various methods such as hot air dry, oven-broil, roast, pan fry, deep fry, boil, steam, and by microwave. In the physical evaluation of texture, the hardness and fracturability values were highest when larvae were cooked in the microwave. The adhesiveness, springiness, and chewiness values were highest when larvae were boiled. Boiled and steamed larvae had the highest lightness (L value), while oven-broiled larvae had the highest redness (a value) and yellowness (b value) values. Sensory evaluations assessed the appearance, aroma, flavor, and texture of cooked T. molitor larvae. Steamed and boiled larvae sizes were significantly large and the form was well preserved similar to fresh larvae. The moisture heat cooked (steamed and boiled) T. molitor larvae had the aroma and flavor of steamed corn, canned pupa, and boiled mushroom. In case of oven-broiled T. molitor larvae, the aroma and flavor of mealworm oil, seafood, sweet and roasted sesame were higher than in those cooked by other methods. In texture among sensory evaluation, the hardness and crispiness were the highest in the hot air dried and oven-broiled larvae, whereas juiciness was significantly higher in the boiled and steamed. Accordingly, we suggest that oven-broiled T. molitor larva will be prefered by consumer, due to its the rich aroma and flavor.

• Food Science of Animal Resources
• /
• v.21 no.4
• /
• pp.314-322
• /
• 2001

This study was carried out to investigate the physico-chemical properties of imported beef and Hanwo beef tenderloin steak in proximate composition, pH, myofibril Fragmentation Index (MFI), meat color, cooking loss, rheology and panel test by various cooking methods (grilling, pan-frying, oven-roasting and microwaving). moisture content of microwaving steak was lower than steak by other cooking method, and fat content of microwaving steak was higher than those of other cooking method was showed. In general, the pH values were increased with cooking, but there were no significant differences among pH values by various cooking method. The highest level of MFI in oven-roasting was showed, but no significant difference could be found among various cooking method. L* and b* -values of microwaving and pan-frying were higher than those of grilling and oven-roasting, also a* -value of microwaving was the lowest. Cooking loss was affected by cooking method. Microwaving method resulted in the highest cooking loss. Generally higher value of hardness and brittleness in microwaving than those of other cooking method were showed, and microwaving had the lowest cohesiveness, but there was no significant difference among the elasticity by the cooking method. Grilling, pan-frying and oven-roasting had high score of sensory evaluation, while microwaving had the lowest score in all sensory profile scores.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.1
• /
• pp.67-77
• /
• 2013

To improve the energy efficiency of conventional thermal treatment, soil remediation with microwave has been studied. In this study, the remediation efficiency of contaminated soil with semi-volatile organic contaminants were evaluated with microwave oven and several additives such as water, formic acid, iron powder, sodium hydroxide (NaOH) solution, and activated carbon. For the experiment, loamy sand and sandy loam collected from Imjin river flood plain were intentionally contaminated with hexachlorobenzene and phenanthrene, respectively. The contaminated soils were treated with microwave facility and the mass removals of organic contaminants from soils were evaluated. Among additives that were added to increase the remediation efficiency, activated carbon and NaOH solution were more effective than water, iron powder, and formic acid. When 10 g of hexachlorobenzene (142.4 mg/kg-soil) or phenanthrene (2,138.8 mg/kg-soil) contaminated soil that mixed with 0.5 g iron powder, 0.5 g activated carbon and 1 ml 6.25 M NaOH solution were treated with microwave for 3 minutes, more than 95% of contaminants were removed. The degradation of hexachlorobenzene during microwave treatments with additives was confirmed by the detection of pentachlorobenzene and tetrachlorobenzene. Naphthalene and phenol were also detected as degradation products of phenanthrene during microwave treatment with additives. The results showed that adding a suitable amount of additives for microwave treatments fairly increased the efficiency of removing semi-volatile soil organic contaminants.