• 마이크로전자및패키징학회지
• /
• 제8권2호
• /
• pp.9-13
• /
• 2001

$(Ba_{0.5}Pb_{0.5})Nd_2Ti_5O_{14}$(마이크로파 유전체 세라믹스에 borosilicate계 유리를 첨가하여 저온소결 특성과 마이크로파 특성을 조사하였다. Borosilicate계 유리가 2~3 wt% 첨가된 경우 $950^{\circ}C$의 소결 온도에서 소결성이 향상됨과 동시에 품질계수도 놀아지는 것을 확인할 수 있었다. BPNT에 3 wt%의 유리를 첨가함으로써 $950^{\circ}C$에서 유전율은 90에서 75 정도로 약간의 감소를 보였으나 마이크로파 품질계수 (Q$\times$f)는 4500 정도로 잘 유지되었고 공진주파수의 온도계수도 +10 $ppm/^{\circ}C$로서 잘 유지되는 결과를 나타내었다.

• 한국세라믹학회지
• /
• 제44권10호
• /
• pp.537-541
• /
• 2007

Microwave dielectric properties of $0.95 Ca_{0.85}Nd_{0.1}TiO_3-0.05LnAlO_3$ (Ln=Sm, DH, Er) were investigated as a function of sintering temperature and lanthanide ion type. A single perovskite phase with an orthorhombic structure was obtained throughout the entire range of composition. The dielectric constant (K) was dependent upon the dielectric polarizabilities and the B-site bond valence in the $ABO_3$ perovskite structure. The quality factor (Qf) of the specimens with $ErAlO_3$ was smaller than those with $SmAlO_3\;and/or\;DyAlO_3$ due to the smaller grain size. The temperature coefficient of resonant frequency (TCF) could be controlled from $107.28ppm/^{\circ}C$ at Ln=Sm to $87.23ppm/^{\circ}C$ at Ln=Er due to the changes of B-site bond valence in the $ABO_3$ perovskite structure.

• 한국재료학회지
• /
• 제8권11호
• /
• pp.1043-1047
• /
• 1998

CuO 및 C얘의 첨가가 $BiNbO_4$ 세라믹스의 고주파 유전특성에 미치는 영향을 조사하였다. CdO 첨가량이 증가함에 따라 소결밀도 및 품질계수는 감소하였고 소결온도가 증가하면 유전상수 및 품질계수는 증가하였다. $BiNbO_4$에 CuO 및 CdO를 각각 0.03wt% 첨가한 시편을 $960^{\circ}C$에서 소결시 유전율 41.2, 품질계수($Q{\times}f_0$) 6,500(at 5.6GHz), 공진주파수 온도계수 $3ppm^{\circ}C$의 우수한 고주파 유전특성을 얻을 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권4호
• /
• pp.232-240
• /
• 1999

In this study, the $(1-\chi)Ba(Mg_{\fraction one-third}Ta_{\fraction two-thirds}O_3-\chiBa(Co_{\fraction one-third}\Nb_{\fraction two-thirds})O_3$ ceramics($\chi$=0.3,0.4,0.5,0.6) were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $1500~1575^{\circ}C$ for5 hours in air. The BMT-BCN ceramics have a complex perovskite structure, and have peaks of (101), (102), (201), (202) and (212). Increasing the sintering temperature, dielectric constant was increased. Temperature coefficients of resonant frequency of the specimens were decreasing with increasing BCN content. In the case of the 0.7BMT-0.3BCN ceramics sintered at $1575^{\circ}C$ for 5 hours, dielectric constant, quality factor and temperature coefficient of resonant frequency for microwave dielectrics application were a good value of 28, 235500 at ㎓ and -$1.2 ppm/^{\circ}C$, respectively.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.44.2-44.2
• /
• 2009

BCP powder was synthesized using microwave hydrothermal process with mixed calcium hydroxide and phosphoric acid. After using replica method, porous BCP scaffold was fabricated. PU (Poly Urethane) was used as the fugitive skeleton to fabricate the porous scaffold. BCP powder was mixed in PVB (Polyvinyl butyral) and ethanol solution and then applied to the PU foam by dip coating. After several times of coating and the subsequent oven drying the coated PU foam was burnt out at $750^{\circ}C$ at air to remove the PU. The resulting networked porous composites were sintered at $1250^{\circ}C$, $1300^{\circ}C$ and $1350^{\circ}C$ in microwave furnace for 30 minutes. Material properties of the porous bodies like compressive strength and porosity were investigated. Detailed microstructure of the BCP porous body was characterized by SEM and XRD and TEM techniques. In our experiments, the relationship between mechanical property and viscosity of powder, sintering temperature was investigated.

• 한국전기전자재료학회논문지
• /
• 제28권7호
• /
• pp.419-423
• /
• 2015

Sintering, microstructure, thermal conductivity and microwave dielectric properties of xLiF-(1-x)MgO ceramics (x=0.03~0.10 mol) were investigated. The high density was obtained in the specimens of $x{\geq}0.06$, i.e., 0.04 LiF-0.96 MgO in mol, whereas the amount of 0.03 mol LiF was insufficient to densify. From the result that the contact flattening in the sintered specimen was observed, the densification occurred through the liquid-phase sintering. The specimen of x=0.06 showed the highest room-temperature thermal conductivity. Relative density, thermal conductivity, dielectric constant, and quality factor ($Q{\times}f$) of the specimen for x=0.06 sintered at $900^{\circ}C$ for 4 h were 97.8%, $39.2Wm^{-1}K^{-1}$, 9.45, and 14,671 GHz, respectively.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.379-382
• /
• 1998

In this paper, the microwave dielectric properties of the yPb($Fe_{2/3}W_{1/3}$)$O_{3}$ - (1-y)($Pb_{x}Ca_{1-x}$)$ZrO_{3}$ system were investigated. It was found that an addition of Pb($Fe_{2/3}W_{1/3}$)$O_{3}$ promotes the grain growth, the solid solution between the Pb-based perovskite and the Ca-based perovskite and the decreasing of the sintering temperature. Especially, we found that 0.05Pb($Fe_{2/3}W_{1/3}$)$O_{3}$-0.95($Pb_{x}Ca_{1-x}$)$ZrO_{3}$ ceramic has not only lower sintering temperature but also better dielectric properties than those of the (Pb, Ca)$ZrO_{3}$ systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1250-1251
• /
• 2008

In this study, the dielectric ceramics with low loss were investigated for high frequency application. All sample of the $Ba_5M_4O_{15}$ (M=Ta, Nb) ceramics were prepared by the conventional mixed oxide method and sintered at $1325{\sim}1575^{\circ}C$. The bulk density and dielectric constant of the $Ba_5Ta_4O_{15}$ ceramics were increased continuously with increasing of sintering temperature. The quality factor was increased in the sintering temperature of $1375{\sim}1475^{\circ}C$ but decreased at the temperature above 1475$^{\circ}C$. In the case of $Ba_5Nb_4O_{15}$ ceramics, the bulk density, dielectric constant and quality factor were increased with sintering temperature but decreased above temperature of 1400$^{\circ}C$. The dielectric constant, quality factor and temperature coefficient of the resonant frequency (TCRF) of the $Ba_5Ta_4O_{15}$ and $Ba_5Nb_4O_{15}$ ceramics, sintered at 1475$^{\circ}C$ and 1400$^{\circ}C$, were 25.15, 53105 GHz, -3.06 ppm/$^{\circ}C$ and 39.55, 28052 GHz, 5.7 ppm/$^{\circ}C$, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.533-536
• /
• 2003

YIG(Yttrium Iron Garnet) is one of the most widely used ferrites for microwave telecommunication. It used as a passive devices such as isolators and circulators. In order to reduce the insertion losses of these passive devices, it is very important to reduce magnetic loss of the ferrites. In general, the magnetic losses of ferrites is closely related to the microstructure of the ceramics. In the sintering of YIG, pores are easily trapped in grains and grain boundaries. These pores cause to increase magnetic losses of the sinterted bodies. In this paper, the effect of the $SiO_2$ addition on the microstructure was discussed. Increasing the $SiO_2$ addition, the grain size was reduced, which means that added acts as a grain-growth inhibitor. During the sintering, $SiO_2$ settled down on the grain boundaries, and drag the grain growth. Therefore, there is enough time for pores to move out. The relative density of YIG sintered at $1350^{\circ}C$ with 1 mol% $SiO_2$ addition was 99.6%. $\Delta$H of these samples was under 50 Oe.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.123-126
• /
• 2001

The $0.98MgTiO_3-0.02BaTiO_3$ ceramics were prepared by the conventional mixed oxide method. The structural properties were investigated with sintering temperature and composition ratio by XRD, SEM and EDS. According to the X-ray diffraction patterns of the $0.98MgTiO_3-0.02BaTiO_3$ ceramics, the hexagonal $BaMg_6Ti_6O_{19}$ and ilmenite $MgTiO_3$ structures were coexisted. The dielectric constant$({\varepsilin}_r)$ and quality factor$(Q{\times}f_r)$ were decreased with increasing the sintering temperature in the range of $1275^{\circ}C{\sim}1350^{\circ}C$. In the case of the $0.98MgTiO_3-0.02BaTiO_3$ ceramics sintered at $1275^{\circ}C$, dielectric constant, quality factor and temperature coefficient of resonant frequency were 20.27, 76,845, $-46.6ppm/^{\circ}C$, respectively.