• 한국전자파학회지:전자파기술
• /
• 제4권1호
• /
• pp.10-19
• /
• 1993

전파홉수체의 전파홉수능 측정방법은 기본적으로 다양한 마이크로파 측정법이 이용될 수 있지만, 레이다용전파홉수체의 경우, 전파의 주파수가높기 때문에 파장이 짧아서 측정오차가큰문제점이 있다. 따라서 본 연구에서는 전파홉수체의 전파홉수능을 실험적으로 간단히 측정할 수 있게 하기 위한 2 20rnrn¢동축관 생플흘더 및 Type-N connector로 부터 $20mm\phi$동축관으로의 변환Adaptor를 제작하여 전파홉수체의 설계 및 특성(전파홉수능) 평가에 사용할 수 있게 하였다. 또 구형도파관을 이용한 재료정수 측정법을 채용하여 시료의 형상동의 영향을 적게 받는 실측 방법에 관하여 검토하였다. 나아가서, 구형도파관을 이용한 재료정수 측정치를 반사감쇠량으로 환산한 전파홉수능파 동축관으로 측정한 전파흡수능의 주파수 특성을 구하여 거의 일치함을 밝히고 있다.

• 한국세라믹학회지
• /
• 제39권7호
• /
• pp.669-674
• /
• 2002

마이크로파(2.45GHz, 700w) 에너지를 이용한 마이크로웨이브 하이브리드 소결법으로 90$0^{\circ}C$~107$0^{\circ}C$의 온도 범위에서 Bi$_2$O$_3$와 CuO가 함유된 Ni-Zn 페라이트를 소결하고 이 결과를 일반 소결법으로 소결된 시편과 비교하였다. 각 소결체의 공정 시간은 20~$25^{\circ}C$/min의 승온속도에서 60분 이내에 마칠 수 있었다. XRD분석결과 Ni-Zn페라이트의 단일상만이 관찰되었으며 일반 소결보다 빠른 시간에 소결이 진행되었다. 97$0^{\circ}C$에서 15분 소결 했을 때 소결밀도는 98%로 최대값을 나타내었으며, 모든 소결체의 소결밀도는 90% 이상의 소결 밀도를 나타내었다. 마이크로 하이브리드 소결법으로 소결된 시편과 일반 소결법으로 소결된 시편을 비교하면 소결 특성은 비슷한 결과를 얻을 수 있었다. 마이크로파 에너지를 이용한 소결법은 일반 소결법에 비하여 짧은 시간 안에 공정을 완료할 수 있으므로 공정 시간과 에너지 절약 측면에서 유효한 공정으로 판단된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.386-389
• /
• 2006

The sea surface wind speed (SSWS) derived by microwave radiometer can be contaminated by change of microwave brightness temperature owing to the angle between the sensor azimuth and the wind direction (Relative Wind Direction). We attempt to correct the contamination to the SSWS derived by Advanced Microwave Scanning Radiometer (AMSR) on Advanced Earth Observing Satellite II (ADEOS-II), by applying the method proposed by Konda and Shibata (2004). The improvement of accuracy of the SSWS estimation amounts to roughly 60% of the error caused by the RWD effect.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.391-394
• /
• 1999

The diamond thin films are deposited on silicon using MPCVD(Microwave Plasma Chemical Vapor Deposition) method at various deposition microwave power and time. Diamond is deposited with 100 sccm H$_2$ and 2 sccm CH$_4$ by MPCVD. The crystallinity of diamond thin films were increased with increase of microwave power. The growth rate of diamond thin films were increased with increase of time.

• 한국환경과학회지
• /
• 제15권4호
• /
• pp.341-347
• /
• 2006

Adsorption characteristics of benzene by zeolite were investigated using irradiating microwave. Experimental apparatus was applied to a U-type fix-bed column equipped with microwave system. Zeolite, itself, seems to be inappropriated to remove benzene because of a hygroscopic property, Microwave irradiation to zeolite, however, brings about decreasing $H_{2}O$ adsorption and increasing benzene adsorption. This causes that the dipole material such as $H_{2}O$ was vibrated and heated by irradiation of microwave and desorbed from zeolite. And then, benzene starts to be absorbed by zeolite. In this study, the results showed that the selective adsorption of benzene was occurred by the microwave irradiation and the adsorption capacity of benzene was increased by increasing microwave energy. As a results, it was found that the zeolite could be used to adsorb benzene with microwave and this method make it feasible simultaneously to adsorb and desorb benzene.

• 한국식품저장유통학회지
• /
• 제4권1호
• /
• pp.17-25
• /
• 1997

The effects of microwave treatment on the perservation of foods, such as a seaweed soup and sea stoned radish shreds, were studied. Microwave treatment of microbial cell suspensions revealed that viable cells decreased dramatically when heated to 6$0^{\circ}C$. However, it was unlikely that microwave treatment to 60 is enough to decrease the viable cell counts efficiently in a seaweed soup and radish shreds. It was thought that microwave heating to at least 7$0^{\circ}C$ as a final temperature was an important factor to reduce microbial cell counts in foods. When foods were heated to 7$0^{\circ}C$ with a repetitive 15 sec "on" followed by 30 sec "off", no big differences were observed in viable counts during storage at 2$0^{\circ}C$ for 3 days, as compared to those treated with a full power. The microwave treatment with three stages was designed to solve problems associated with variations depending on food volumes and difficulties of heat diffusion in a solid food to be irradiated with a microwave oven. The three stage method was found to have a similar efficiency in the reduction of viable cell counts in foods to microwave treatment at a full power and to conventional methods, such as water bath heating or boiling for 3 min with a gas range.in with a gas range.

• 한국식품과학회지
• /
• 제31권1호
• /
• pp.54-61
• /
• 1999

본 연구는 해동 중 발생하는 drip 손실, 미생물의 오염, 표면의 과열 등을 방지하면서 급속 해동 방법을 찾기 위해 동결 돈육에 여러 가지 해동 방법을 적용하였다. 4, 28, $50^{\circ}C$에서의 해동과 2,450, 915 MHz의 microwave를 이용하여 해동을 실시하였고, 915 MHz microwave 해동은 출력을 5, 10, 15 kW로 변화시키면서 단일 조사와 $120^{\circ}C$의 열풍을 함께 조사한 경우를 해동시간, 온도분포, drip 손실, 보수력, 표면색도, 총세균수를 측정하였다. 915 MHz microwave를 이용한 해동은 열전도에 의한 해동보다 2백배 이상 시간이 단축되었고, 2,450 MHz microwave를 이용한 해동 방법의 침투깊이의 제한에서 발생되는 문제를 개선시킬 수 있었으며 drip 손실, 보수력, 총세균수에 있어서 효과가 컸다. 저주파수(915 MHz), 저출력(5 kW)의 microwave와 대류 가열을 병용하여 품질 저하를 최소한으로 방지하면서 급속해동을 위한 산업적 이용이 가능한 것으로 기대할 수 있었다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권1호
• /
• pp.16-22
• /
• 2003

This paper presents an application of an impedance boundary condition to 3D vector finite element analysis of a multi-port cylidrical microwave cavity using Snell's law. Computing memory benefits and computing time reduction are obtained from this method compared with the conventional finite element method(FEM). To verify the method, a high permittivity scatterer in free space is analyzed and compared with the results of conventional (FEM). In addition, this method has been analyzed several types of cavities, including water load, to demonstrate the validity and accuracy of the program.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.81-86
• /
• 2002

This paper presents the full wave analysis of microwave circuits with nonlinear device using the finite difference time domain method. The equivalent current source is used to model nonlinear device and all the electric field components at the nonlinear device are updated by FDTD algorithm. The currents and voltages of nonlinear device are calculated by the state equations and iteration method. To validate the proposed method, the S-parameters of NEC NE72089 MESFET in various conditions are analyzed and the results are compared with those of the ADS. The proposed method is applied to the analysis of a microwave amplifier, which includes NEC NE72089 MESFET. The analysis results obtained by the present method show good agreement with those of the ADS.

• 대한치과기공학회지
• /
• 제34권1호
• /
• pp.11-21
• /
• 2012

Purpose: Densification and mechanical properties of dental zirconia ceramics were evaluated by different sintering methods. Materials and Methods: Y-TZP zirconia block(Kavo $Everest^{(R)}$ ZS blank, Kavo dental GmbH, Bismarckring, Germany) was used in this study. Sintering were performed in heat sintering furnace and microwave sintering furnace, and then experimented and analyzed on a change in densification according to the sintering time, a change in densification according to thickness, flexural strength and micro-structure in zirconia specimens. Results: Microwave sintering was very effective in considerable mechanical properties such as flexural strength and bulk density was drastically increased than conventional electric heating method. It is also shown that microwave sintering time was faster and more economical than common method to be present in qualities which equal or exceed. Conclusion: It will be important to seek the accurate sintering condition of dental zirconia by microwave sintering method and the continuous research is necessary for the study of relationship between sintering methods and mechanical properties.