• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.471-474
• /
• 2008

The pyrolytic behavior of waste tire under microwave heating was investigated. Experiments were conducted using a lab- and bench-scale system to delineate the effects of microwave output power on the response. As the results of experiments, it was found that as the microwave output power was increased between 0.84 and 3.04 kW/kg, the oil yield and required time rapidly increased and decreased, respectively. With further increase of the microwave output power, the oil yield and required time did not change significantly.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.109-111
• /
• 2002

The fundamental principles of the operation of microwave discharges that are used to convert microwave energy to broad spectrum visual light are known. In this paper, emission dependance of microwave discharges in mixture content of sulfur with noble gases was studied. It is shown that the excitation of this gaseous mixture is carried out in two phases; (1) ionization of noble gas atoms by a microwave field and (2) the consequent maintenance of slightly ionized nonequilibrium plasma by the field. These two processes have essentially various thresholds for the microwave pump. The purpose of this work is to investigate spectral properties of the high frequency discharges in a mixture sulfur vapors with noble gases.

• Journal of Environmental Science International
• /
• v.15 no.4
• /
• pp.341-347
• /
• 2006

Adsorption characteristics of benzene by zeolite were investigated using irradiating microwave. Experimental apparatus was applied to a U-type fix-bed column equipped with microwave system. Zeolite, itself, seems to be inappropriated to remove benzene because of a hygroscopic property, Microwave irradiation to zeolite, however, brings about decreasing $H_{2}O$ adsorption and increasing benzene adsorption. This causes that the dipole material such as $H_{2}O$ was vibrated and heated by irradiation of microwave and desorbed from zeolite. And then, benzene starts to be absorbed by zeolite. In this study, the results showed that the selective adsorption of benzene was occurred by the microwave irradiation and the adsorption capacity of benzene was increased by increasing microwave energy. As a results, it was found that the zeolite could be used to adsorb benzene with microwave and this method make it feasible simultaneously to adsorb and desorb benzene.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.05a
• /
• pp.277-278
• /
• 2017

• Journal of the Korean Vacuum Society
• /
• v.20 no.4
• /
• pp.294-299
• /
• 2011

In this study, single-walled carbon nanotubes (SWCNTs) were synthesized on a Fe/$Al_2O_3$/Si layer by thermal chemical vapor deposition. Metallic SWCNTs were selectively removed by microwave irradiation. Electrical and structural characterizations of the SWCNTs clearly revealed that the metallic SWCNTs were almost removed by microwave irradiation for 120 sec. The remained semiconducting SWCNTs with a high crystalline structure were obtained over 95%. This method would provide useful information for applications to SWCNTs-based field effect transistors and multifaceted nanoelectronics.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.481-485
• /
• 1998

Hydrated aluminum sulfate, an inorganic polymer, was synthesized from kaolin in $H_2SO_4$ solution using microwave energy. The maximum rates of alumina extracted from calcined kaolin were 72.8% in a conventional process ($80^{\circ}C$, 1M, and 180min) and 99.9% in a microwave process ($90^{\circ}C$, 1M, and 60 min). Compared with the conventional one, the hydrated aluminum sulfate synthesized under the microwave process had layer structure consisting of plate-shaped large grains. After synthesis and then calcination at $1100^{\circ}C$, both products on conventional and microwave processes were ${\gamma}-Al_2O_3$ with agglomerated powders of spherical shape. The specific area of the products in conventional and microwave processes were 113.5 and $106.6m^2/g$, and their average grain sizes were 46.5 an $26.3{\mu}m$, respectively.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.696-703
• /
• 1994

The purpose of this study was to investigate the gelatinization properties of potato starch heated with microwave. Two types of potato starches were prepared; In group A raw potato starch was heated with microwave and in group B potato starch was isolated from potato heated with microwave. Both groups were exposed to the microwave energy in a 560W, 2,450 MHz oven for 60, 120, 180 and 300 seconds. Gelatinization behaviour by DSC made a few differences according to the ratio of starch to water. As the microwave heating time took longer, gelatinization temperature and gelatinization $enthalpy({\bigtriangleup}H_1)$ were decreased in and melting $enthalpy({\bigtriangleup}H_2)$ was increased in group A. Whereas they were increased in group B. In both groups, maximum viscosity in gelatinization by Brabender amylogram was decreased by microwave heating. Then the peak of the maximum viscosity was shifted to higher temperature and cold viscosity was slightly increased. In group A, viscosity in gelatinization and light transmittance by NaOH was increased in initial stage and gel volume in gelatinization by KSCN was decreased. On the other hand, in group B, viscosity by alkali was slightly decreased, but light transmittance by NaOH was almost never changed. Gel volume is decreased like group A.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.889-892
• /
• 2009

A microwave plasma torch at the atmospheric pressure by making use of magnetrons operated at the 2.45 GHz and used in a home microwave oven has been developed. This electrodeless torch can be used to various areas, including industrial, environmental and military applications. Although the microwave plasma torch has many applications, we in the present work focused on the microwave plasma torch operated in pure steam and several applications, which may be used in future and right now. For example, a high-temperature steam microwave plasma torch may have a potential application of the hydrocarbon fuel reforming at one atmospheric pressure. Moreover, the radicals including hydrogen, oxygen and hydroxide molecules are abundantly available in the steam torch, dramatically enhancing the reaction speed. Also, the microwave plasma torch can be used as a high-temperature, large-volume plasma burner by injecting hydrocarbon fuels in gas, liquid, and solid into the plasma flame. Lastly, we briefly report an underway research, which is remediation of soils contaminated with oils, volatile organic compounds, heavy metals, etc.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.23-27
• /
• 2014

The use of electromagnetic energy and non-equilibrium plasma for enhancing ignition and combustion stability is receiving increased attention recently. The conventional technologies have adapted the electrical devices to make the electromagnetic field, which resulted in various safety issues such as high-maintenance, additional high-cost system, electric shock and explosion. Therefore, an electrodeless microwave technology has an advantage for economic and reliability compared with conventional one because of no oxidation. However, the application of microwave has been still limited because of lack of interaction mechanism between flame and microwave. In this study, an experiment was performed with jet diffusion flames induced by microwaves to clarify the effect of microwave on the combustion stability and pollutant emissions. The results show that microwave induced flames enhanced the flame stability and blowout limit because of abundance of radical pool. However, NOx emission was increased monotonically with microwave intensity except 0.2 kW, and soot emission was reduced at the post flame region.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2001.11a
• /
• pp.359-366
• /
• 2001