• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.1
• /
• pp.10-19
• /
• 1993

As a method to measure the absorbing characteristics of microwave absorber, the various microwave measuring method can be used fundamentally. There is, however, a big problem in measuring errors, since the wavelength of microwave such as used for radar is very short. Therefore, this research aimed to design and fabricate a converting adaptor of 20mm .PHI. coaxial tube from a Type - N connector to $20mm\phi$ coaxial tube and to use it for evaluating absorption characteristics of microwave absorber. Furthermore, the measurements of absorbing characteristics and material constants have been performed and reviewed, which were carried out by using the coaxial tube and by using rectangular waveguide, res- pectively. As a result, the validity of the proposed measuring method has been confirmed.

• Journal of the Korean Ceramic Society
• /
• v.29 no.7
• /
• pp.505-510
• /
• 1992

The influence of excess iron content (x) and reaction atmosphere on permittivity, permeability and microwave absorbing properties has been investigated in composite specimens embeded with (Ni0.4Zn0.6O)1-x(Fe2O3)1+x powders. A nitrogen atmosphere used for the reaction of the ferrite with excess iron composition (x>0) enhances spinel formation, and thereby increases both the magnetic and the dielectric loss of the ferrite composite. We also investigated the relation between the electromagnetic constants and the absorbing properites using impedance-matching solution maps for zero reflection. It is suggested that a superior microwave absorber can be fabricated through atmosphere and excess iron control during the powder process.

• Composites Research
• /
• v.14 no.6
• /
• pp.38-46
• /
• 2001

In this study, An optimization code that can design microwave absorbing composite laminates is developed, and 3-layered microwave absorbing composite laminates are developed by optimizing the thickness of each layer. The layers are 3 different composite laminates. Many variables including lay-up angles of electromagnetically orthotropic composite layer can be considered in this code. The developed laminate is composed of an impedance matching layer of glass/epoxy fabric laminate, a glass/epoxy fabric laminate layer containing aluminum filler and carbon/epoxy fabric laminate layer. Permittivities of the materials are obtained using a network analyzer and a coaxial air line.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.805-809
• /
• 1995

In order to widen the band-width of ferrite absorber, compositional effect on the complex permeability of Ni-Zn ferrite and the structure of grid absorber were studied. From the experimental results, we could determine the optimum composition composition of Ni-Zn ferrite and the structure of grid absorber. Also, we manufactured grid absorber and investigated its microwave absorbing characteristics. Calculation shows that the ferrite frid absorber suppresses reflection ${\leq}-20dB$ from 30 MHz to 700 MHz and the conventional ferrite tile absorber suppresses reflection ${\leq}20dB$ in the frequency range of 30 MHz-400 MHz. It was found that the microwave absorbing performance of the ferrite grid absorber was superior to the ferrite tile absorber.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1992.03a
• /
• pp.48-49
• /
• 1992

• Proceedings of the Korean Magnestics Society Conference
• /
• 1992.03a
• /
• pp.50-51
• /
• 1992

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.03a
• /
• pp.48-49
• /
• 1993

• Journal of the Korean Institute of Navigation
• /
• v.16 no.4
• /
• pp.25-34
• /
• 1992

As a method of measure the absorbing characteristics of microwave absorber, the various microwave measuring method can be used fundamentally. There is, however, a big problem in measuring errors, since the wavelength of microwave such as used for radar is very short. Therefore, this research aimed to design and fabricate a converting adaptor of $20mm^{\phi}$ coaxial tube from a Type-N connector to $20mm^{\phi}$ coaxial tube and to use it for evaluating absorption characteristics of microwave absorber. Furthermore, the measurements of absorbing characteristics and material constants have been performed and review, which were carried out by using the coaxial tube and by using rectangular waveguide, respective. As a result, the validity of the proposed measuring method has been confirmed.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.78-81
• /
• 1990

The Engquist-Majdas second-order Absorbing Boundary Conditions (ABC) has been combined with the finite element formulation replacing the boundary integral equations in the hybrid finite-boundary element method (HEM). The method is applied to electromagnetic field radiation problems, especially to the microwave launcher, in order to verify the finite element formulation with the ABC's. The results with ABC are in good agreement with those of HEM. In order to see the applicability of the ABC, a simplified microwave oven utilizing ABC and an absorbing material are provided. The EM field distribution of the model is visualized. This method could be a useful analysis and design tool for EM field devices.

• Journal of Magnetics
• /
• v.2 no.1
• /
• pp.25-27
• /
• 1997

Ferrite tile absorber is of great concern for the application to anechoic chambers due to the growing demand of EMI or EMC measurements. This paper investigates the magnetic, dielectric and microwave absorbing properties of a Ni-An ferrite for the purpose. A design chart was constructed with the solutions of impedance-matching equation in the radio frequencies (30 MHz - 1 GHz). The material parameters for zero-reflection are predicted from the chart. The magnetic and dielectric properties of sintered Ni-Zn ferrite is found to be well suited for this requirements. A superior microwave absorbing properties (frequency band and absorber thickness) of the samples are demonstrated.