• Journal of Information Technology Services
• /
• v.12 no.3
• /
• pp.323-330
• /
• 2013

In this paper, miniaturized patch antenna operating at ISM band has been designed by applying the fractal technique. Various type of antenna structure, microstrip patch antenna and koch curve microstrip patch antenna has been proposed and simulated using Ansoft HFSS (High Frequency Structure Simulator). The area of microstrip patch antenna and koch microstrip patch antenna is 1,058 $mm^2$, and 891 $mm^2$ respectively, showing the size reduction ratio of 16%. The finally made koch curve microstrip patch antenna resonates at 2.45GHz with return loss of 22.69dB, VSWR of 1.2142, and antenna radiation gain of 3.26dBi.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.224-225
• /
• 2005

The microstrip patch antenna with PVDF (poly vinylidene fluoride) substrate, were experimentally studied at frequency 6 GHz. During the design of the essential elements of microstrip antenna, EM simulation tool Ensemble V 7.0 is used. We observed the resonant frequency by DC appled electric field in a microstrip patch antenna. This research has been made as an electronically tunable microstrip antenna, taking advantage of the voltage control dielectric substrate and piezoelectric properties substrate. We discuss the effect of substrates, electric field and piezoelectric phenomena in the PVDF microstrip antenna. The antenna frequency can be changed by varying the applied dc voltage. In this paper, we propose, a new technique to agile frequency of the microstrip antenna by using the PVDF piezoelectric substrate.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.163-166
• /
• 2000

The design, numerical simulation, and an experimental implementation of two-element cross-shaped microstrip line-fed printed slot array antenna for IMT-2000 at the 2.0 GHz band is presented in this paper. The proposed antenna with relative permittivity 4.3 and thickness 1.0mm is analyzed by the Finite-Difference Time-Domain (FDTD) method. It was shown that the measured 2.0 VSWR bandwidth of one-element microstrip slot antenna is from 1.42 GHz to 2.69 GHz, which is approximately 61.8% and that of two-element microstrip slot array antenna is from 1.42 GHz to 2.56 GHz, which is approximately 57.3% And it was shown that the measured gain of one-element microstrip slot antenna is 2.75 dBi and that of two-element microstrip slot antenna is 4.75 dEi. The antennas were fabricated and tested. The measured results are in good agreements with the FDTD results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.488-491
• /
• 2001

This paper investigated that resonant frequencies of microstrip patch antenna were agile when piezoelectric materials were used as the antenna substrates. The resonant frequencies of the microstrip antenna using the piezoelectric substrate. The microstrip patch antenna made of Quartz substrate was designed and fabricated by Ensemble v 7.0 simulator. The experimental problem was compensated by Ensemble v 7.0

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.169-175
• /
• 2006

In this paper, a microstrip patch antenna with the T-shaped slits is designed and fabricated for GPS. The resonant frequency of the microstrip patch antenna with the slits is lower than that of a microstrip patch antenna without the slits so it can be reduced the size of patch. In order to calculate resonant frequency of the microstrip patch antenna with the slits, the resonant frequency formulas are derived from the surface current distribution on microstrip patch antenna. Using the Ensemble 6.0 simulation tool, the accuracy of approximate equations is verified. The microstrip patch antenna with the slits is designed by using these equations. The size of the designed antenna with T-shaped slits can be reduced to 29% compared with that without the slits. The microstrip patch antenna with slits have a very narrow bandwidth. In order to improve the narrow bandwidth of microstrip patch antennas with the slits, a microstrip patch antenna with rectangular slot is proposed. As the result of the measurements, the resonant frequency of the proposed microstrip patch antenna with the T-shaped slits is 1.575GHz and the bandwidth is about 50MHz.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1081-1085
• /
• 2015

In this paper a printed pair dipole antenna with double tapered microstrip balun for wireless communications is proposed. The proposed antenna consists of a pair arm of different sizes that is branched microstrip line and microstrip line with the ground plane on opposite side of the dielectric substrate plane. The proposed antenna is matched between the ground plane to the microstrip line by double tapered microstrip balun. This antenna obtains multi-band radiation frequency band. The impedance bandwidths for a reflection coefficient of VSWR ≤ 2 are about 1.01 GHz (2.35~3.336 GHz), 1.56 GHz (4.7~6.26 GHz) and 1.15GHz (6.85~8.0[GHz]). Additionally, the measurement peak gain is about 3.6 dBi. The proposed antenna is able to support wireless communication applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.5
• /
• pp.435-441
• /
• 1989

The three rectangular microstrip patch antenna of Resonant length, lambda/2 or , between two slot is designed by using the ring feed line, and the radiation pattern characteristic is showen. In case of the antenna of resonant length lambda/2 the radation pattern is shown at each antenna element, in the antenna of resonant length it is shown among patch antenna element.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1664-1667
• /
• 2003

Aperture-coupled microstrip antenna is one type of microstrip antennas. This type of antenna has bandwidth wider than simple microstrip antenna. Herein, we use two substrates, that have the same dielectric constant 2.47 (PTFE-quartz) in which upper substrate is a rectangular patch. The microstrip patch is fed by a microstrip line which is printed on lower substrate, through an aperture or slot in the common ground plane of patch and microstrip feed. This antenna is analyzed by using Finite Difference Time Domain (FDTD) method the specific design frequency 10 GHz and match impedance is 50 ohms. The simulation results of its characteristics are input impedance, return loss, VSWR and radiation patterns respectively.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.246-249
• /
• 2002

In this paper, a rectangular patch antenna is miniaturized by changing tile middle of patch into narrow microstrip line except the edges of the patch where the fringing field occurs. Miniaturizing rate, gain, radiation patterns of suggested antennas were compared with general square microstrip antenna by using simulator Ensemble. As a result, it reduces the size of antenna by 30% and improves the characteristic of X pol as a advantage while it reduces gain and bandwidth.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.5-8
• /
• 2004

In this paper, a novel 400MHz band small meander microstrip antenna is proposed the shape of the proposed antenna is a waved meander microstrip with a pair rf short pins on th￡ edge. the length of waved meander microstrip is $\lambda_g/4$ but it bends to half its size. Therefore, the total size of the proposed antenna is reduced to about 1/20 which is compared with a square patch antenna the simulated antenna gain is about 3dBi at 424MHz. the proposed antenna of -10dB impedance bandwidth is measured about $1.4\%$.