• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.257-257
• /
• 2011

The amorphous indium-gallium-zinc-oxide (a-IGZO) materials for use in high performance display research fields are strongly investigated due to its good performance, such as high mobility and better transparency. However, the stability of a-IGZO materials is increasingly becoming one of critical issues due to the sub-gap electron trap sites induced by rough interfaces during deposition processing. It is well-known that the threshold voltage shift is related to interface roughness and oxygen vacancy formed by breaking weak chemical bonds. Here, we report the better properties of transparent oxide transistors by reducing the threshold voltage shift with an external rf plasma supported magnetron sputtering system. Mainly, our sputtering method causes the surface of sample to be sleek, so that it prevents the formation of various defects, such as shallow electron trap sites in the interface. External rf power was applied from 0 to 50W during RF sputtering process to enhance the stability of our oxide transistor without having a large voltage shift. To observe the effects of external rf-plasma source on the properties of our devices, Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Transmission Electron Microscopy (TEM) are carried out to observe surface roughness and morphology of sputtered thin film. In addition, typical electrical properties, such as I-V characteristics are analyzed.

• Korean Journal of Materials Research
• /
• v.25 no.11
• /
• pp.607-611
• /
• 2015

The microstructural evolution of Grade 91 tempered martensite ferritic steels heat treated at $760{\sim}1000^{\circ}C$ for two hours was investigated using scanning electron microscopy(SEM), energy disperse spectroscopy(EDS), electron backscattered diffraction (EBSD), and transmission electron microscopy(TEM); a microhardness tester was also employed, with a focus on the grain and precipitate evolution process as well as on the main hardening element. It was found that an evolution of tempered martensite to ferrite($760{\sim}850^{\circ}C$), and to fresh martensite($900{\sim}1000^{\circ}C$), occurred with the increase of temperature. Simultaneously, the parabolic evolution characteristics of the low angle grain boundary(LAGB) increased with the increase of the heating temperature(highest fraction of LAGB at $925^{\circ}C$), indicating grain recovery upon intercritical heating. The main precipitate, $M_{23}C_6$, was found to be coarsened slightly at $760{\sim}850^{\circ}C$; it then dissolved at $850{\sim}1000^{\circ}C$. Besides this, $M_3C$ cementite was formed at $900{\sim}1000^{\circ}C$. Finally, the experimental results show that the hardness of the steel depended largely on the matrix structure, rather than on the precipitates, with the fresh martensite showing the highest hardness value.

• Applied Microscopy
• /
• v.43 no.1
• /
• pp.9-13
• /
• 2013

The helium ion microscope (HIM) has recently emerged as a novel tool for imaging and analysis. Based on a bright ion source and small probe, the HIM offers advantages over the conventional field emission scanning electron microscope. The key features of the HIM include (1) high resolution (ca. 0.25 nm), (2) great surface sensitivity, (3) great contrast, (4) large depth-of-field, (5) efficient charge control, (6) reduced specimen damage, and (7) nanomachining capability. Due to the charge neutralization by flood electron beam, there is no need for conductive metal coating for the observation of insulating biological specimens by HIM. There is growing evidence that the HIM has substantial potential for high-resolution imaging of uncoated insulating biological specimens at the nanoscale.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.286-286
• /
• 2006

We report on a fascinating morphology; giant spherical conducting polythiophene by the in-situ gamma radiation-induced chemical polymerization method. The resultant micron-size buckyball-shaped polymer structures were identified by high resolution transmission electron microscopy and scanning electron microscopy. Different characterizations e.g. Fourier transform infrared, x-ray diffraction, and x-ray photoelectron microscopy were utilized to prove that the new morphological conducting polythiophene was synthesized successfully by this novel method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.284-284
• /
• 2010

We report a fabrication of 6, 13-bis(triisopropylsilylethynyl) (TIPS) pentacene nanowires that made on Si substrates by liquid bridge-nanotransfer molding (LB-nTM) with polyurethane acrylate (PUA) mold. LB-nTM is based on the direct transfer of various materials from a stamp to a substrate via a liquid bridge between them. In liquid bridge-transfer process, the liquid layer serves as an adhesion layer to provide good conformal contact and form covalent bonding between the TIPS-pentacene nanowire and the Si substrate. The patterned TIPS-Pentacene nanowires have been investigated by Atomic force microscopy (AFM), Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM) and electrical properties.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.536-536
• /
• 2012

나노와이어는 센서, 메모리소자, 태양전지등과 같은 다양한 소자로 응용이 되고 있다. Bottom-up 방법으로 길러진 나노와이어들을 금속전극 위에 정렬 및 접합시킬 때, 나노와이어와 금속전극간의 기계적 접합강도와 안정적인 전기적 특성이 매우 중요하다. 본 연구에서는 열압착 공정과 솔더전극(Cr/Au/In/Au, Cr/Cu/In/Au)을 사용함으로써, 나노와이어를 금속전극에 압입시켜 강한 기계적 접합강도와 안정적인 전기적 특성을 얻을 수 있는 공정을 제안하였다. 나노와이어와 금속 전극간의 접합부 분석을 위해 scanning electron microscopy (SEM)와 transmission electron microscopy (TEM)을 이용하였으며, 기계적 특성은 lateral force microscopy (LFM), 전기적 특성은 semiconductor analyzer (Keithley 4200-SCS)를 사용하여 측정하였다. 접합강도 측정결과 lateral force가 나노와이어에 가해질 때 나노와이어가 파괴되는 힘에서도 나노와이어와 금속전극간의 접합부파괴가 일어나지 않았다. 또한 나노와이어와 금속전극간의 전기적 접촉특성은 안정적인 ohmic contact을 이루었다.

• Journal of Korea Foundry Society
• /
• v.19 no.6
• /
• pp.472-483
• /
• 1999

The effects of rapid solidification and Cr addition to the microstructure variations of the rapid solidified Ti-48Al-xCr(X = 2,4,6) alloys have been investigated using X-ray diffractometry, optical microscopy, scanning electron microscopy and transmission electron microscopy. The segregated coarse ${\gamma}$ phase was eliminated and the microstructure was refined by rapid solidification of the cooling rate of $10^4-10^6\;^{\circ}C/sec$. The lattice parameters and tetragonality of ${\gamma}$ phase decrease with the increase Cr content and by the rapid solidification. Non-equilibrium phase ${\alpha}$ remains at room temperature condition, which would be resulted from the restriction of phase transformation ${\alpha}$ to ${\alpha}_2+{\gamma}$.

• Carbon letters
• /
• v.27
• /
• pp.42-49
• /
• 2018

A citric acid functionalized graphene oxide nanocomposite was successfully synthesized and the structure and morphology of the nanocatalyst were comprehensively characterized by Fourier transform infrared spectroscopy, energy-dispersive X-ray analysis, X-ray diffraction patterns, atomic force microscopy images, scanning electron microscopy images, transmission electron microscopy images, and thermogravimetric analysis. The application of this nanocatalyst was exemplified in an important condensation reaction to give imidazole derivatives in high yields and short reaction times at room temperature. The catalyst shows high catalytic activity and could be reused after simple work up and easy purification for at least six cycles without significant loss of activity, which indicates efficient immobilizing of citrate groups on the surface of graphene oxide sheets.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.435-444
• /
• 2021

The genus Chroomonas is a group of blue-green colored cryptomonads. This study describes two freshwater Chroomonas species for the first time in South Korea: Chroomonas nordstedtii Hansgirg and Chroomonas coerulea (Geitler) Skuja. We examined the morphology and ultrastructure of these species by light microscopy, scanning electron microscopy, and transmission electron microscopy. These two Chroomonas species were blue-green colored and ovate to oval-shaped. Chroomonas nordstedtii was characterized by two Maupas ovals with hexagonal periplast plates, whereas C. coerulea was characterized by one eyespot with rectangular periplast plates. A molecular phylogeny with data from nuclear SSU rRNA and chloroplast rbcL genes revealed that Korean C. nordstedtii formed a distinct clade with NIES-708, NIES-1004 from Japan, and UTEX 2779 from Colorado, USA, while C. coerulea formed a clade with ACOI 1366 from Portugal.

• Applied Microscopy
• /
• v.50
• /
• pp.27.1-27.6
• /
• 2020

Transition metal dichalcogenides (TMD), which is composed of a transition metal atom and chalcogen ion atoms, usually form vacancies based on the knock-on threshold of each atom. In particular, when electron beam is irradiated on a monolayer TMD such as MoS₂ and WS₂, S vacancies are formed preferentially, and they are aligned linearly to constitute line defects. And then, a hole is formed at the point where the successively formed line defects collide, and metal clusters are also formed at the edge of the hole. This study reports a process in which the line defects formed in a monolayer WS₂ sheet expends into holes. Here, the process in which the W cluster, which always occurs at the edge of the formed hole, goes through a uniform intermediate phase is explained based on the line defects and the formation behavior of the hole. Further investigation confirms the atomic structure of the intermediate phase using annular dark field scanning transition electron microscopy (ADF-STEM) and image simulation.