• Applied Microscopy
• /
• v.43 no.4
• /
• pp.146-154
• /
• 2013

Capillaria hepatica (syn. Calodium hepatica) is a parasite found mainly in rodent liver. But, it has also been found in a wide variety of mammals, including humans. This worm is unique as it is the only nematode parasite that is embedded in the liver parenchyma of the host even during the adult stage of the life cycle. They produce eggs that elicit a marked granulomatous reaction that eventually destroys the worms. Fibrosis and lymphoplasmacytic inflammatory infiltration are often observed around adult nematodes embedded in the liver parenchyma of the host. For this reason, complete isolation of this slender worm and observation of the intact ultrastructure is very difficult. In this study, 10 intact whole worms (C. hepatica) were isolated from the liver of 3-week-old mouse after inoculation of artificially embryonated eggs collected from house rats (Rattus norvegicus). Their external structure of was observed with light and scanning electron microscopy. The length of the isolated female and male C. hepatica was approximately 69.60 mm and 36.92 mm, respectively. More detailed ultrastructure, including bacillary band, eggs and vulva in female and spicule and spicule sheath in male C. hepatica was also described.

• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.31-36
• /
• 2007

It has been reported that the surface properties of the plasma treated material were changed while maintaining its bulk properties. In this study, surface modification of nylon fiber by plasma treatment was tried to attain high water-repellency Nylon fiber was treated with RF plasma under a vacuum system using various parameters such as gas specious, processing time and processing power. Morphological changes by low pressure plasma treatment were observed using scanning electron microscopy (SEM) and atomic force microscopy (AFM). Moreover, the mechanical and inherent properties were analyzed by tensile strength, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The high water-repellency property of nylon fiber was evaluated by a water-drop standard test under various conditions in terms of aging effect. The results showed that the water-repellency of plasma-surface-treated nylon fiber was greatly improved compared to untreated nylon fiber.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.2 no.2
• /
• pp.173-180
• /
• 2001

The stink bug, Eocanthecona furcellata (Wolff.) is a natural and potential biocontrol agent of Spilarctia obliqua (Walk.). The present investigation reveals the biology, predatory efficiency and reproductive parameters of the predator which feeds on S. obliqua caterpillars in mulberry plantation. In order to find out the role of prey sine on the biology of the predators the predatory insects were separately fed with small and large caterpillars of S. obliqua. The incubation period of the eggs of E. furcellata was 8.37${\pm}$0.44 days, while the nymphal duration varied as per the prey sine. The predator when supplied with small larvae of prey, consumed 61.1 larvae and completed nymphal stage in 19.9 days; while those fed with larger prey, consumed 36.1 larvae and completed their nymphal stage in 21.55 days. The prey size also influences the reproductive parameters of the predator, The adult female predator is more voracious feeder than the adult male and consumed 41.9${\pm}$0.64 small larvae and 42.2${\pm}$0.87 large larvae during their life span. The longevity of male and female was observed as 20.7 and 29.4 days respectively. Visualization of the predator as well as the movement of the prey increases the predatory efficiency. Scanning electron microscopic studies on the feeding part explain its support in effective predation. Field observations indicated a drastic fall in the incidence of the mulberry pest, S. obliqua with the increased population E. furcellata in mulberry plantation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.930-934
• /
• 2006

This paper reports a change of carbon nanotubes(CNTs) properties by post-treatment process after growth of CNTs. CNTs were treated by thermal method and solution method, and then investigated in detail using field emission scanning electron microscopy(FE-SEM), high resolution transmission scanning electron microscopy(HR-TEM), RAMAN spectroscopy, and Fourier Transform Infrared Spectrometer (FT-IR). FT-IR spectra showed that the amount of hydroxyl generated on surface of CNTs were changed with post-treatment condition. FE-SEM and TEM images were shown CNTs diameter and density variations were dependent with their treatment conditions. RAMAN spectroscopy was shown that carbon nanotubes structure vary with treatment conditions.

• Journal of the Korean Ceramic Society
• /
• v.22 no.2
• /
• pp.44-50
• /
• 1985

The crystallization behavior of $K_2O-SiO_2$ glasses with added $TiO_2$ and the effect of $TiO_2$ on internal nuleation at temperature in the range of 875 to 121$0^{\circ}C$ have been investigated by means of X-ray diffractometry optical microscopy and scanning electron microscopy. The crystalline phase of these glasses identified by X-ray diffractometry is cristbalite. The scanning electron microspcopy reveals a two-phase layer of dendritic crystals and intersitial melt which grow from the surface at a constant rate, The observed crystallization rates are consistent with a diffusion-controlled mechanism. An equation relating viscosity and undercooling to growth rate is presented.

• The Korean Journal of Mycology
• /
• v.27 no.5 s.92
• /
• pp.341-344
• /
• 1999

The genus Hypocrea, a member of the Hypocreales, has yellow to pale yellow-ochre, perithecial stromata and angular to cuboid ascospores. The isolate of Hypocrea microrufa collected on decayed tropical wood at Malaysia is compared with H. rufa and H. microsplendens. This isolation of H. microrufa will be the first record from tropical region and the first description with scanning electron microscopy. The ornamentation of ascospores used one of main taxonomic keys for identification.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.275-281
• /
• 2010

Wood identification was conducted for the 8 Neolithic charcoals excavated at Giheung Nongseori Ruins through scanning electron microscopy. They were all identified as hardwood: 6 and 1 were found to be Prinus section and Cerris section of subgenus Lepidobalanus under genus Quercus, respectively, and the remaining 1 to be genus Betula. This species composition was thought to indicate the temperate to warm temperate climate region.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.773-776
• /
• 2013

We have prepared 1-D BiSI and 2-D BiOI nanostructures, and characterized them by scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction crystallography, thermogravimetric analysis/differential scanning calorimetry, and UV-visible absorption. Here, we first report clear HR-TEM image of BiSI. In addition, we first found that the growth direction of BiSI is [12-1] plane, with the neighboring distance of 0.30 nm. The crystal structures of BiSI and BiOI are found to be orthorhombic (Pnam) and tetragonal (P4/nmm), respectively. The absorption band gaps of BiSI and BiOI are measured to be 1.55 and 1.92 eV, respectively. Our study could further highlight the applications of V-VI-VII compounds.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.827-831
• /
• 1997

Conductive veramic matrix composite(CMC) workpiece of TiC 33%/Al /sab 2/O /sab 3/ 66% Y /sab 2/ O /sab 3/ was machined by die sinking electrical discharge machining(EDM) according to different pulse duration and suty factor for reverse polarity of electrode. Material removal rate(MRR) was examined by process under various operating conditions. The surface morphology was evaluated by surface roughness values and scanning electron microscopy(SEM) research. The more MRR was obtained according to increase pulse duration and duty factor. Also the maximum surface roughness(Rmax) of EDMed surface was slightly changed with increased pulse duration and duty factor. The SEM photographs of EDMed surface showed wide recast wide recast distribution region of melting materials in purse duration 0.130(ms) than 0.048(ms).

• Journal of the Korean Ceramic Society
• /
• v.31 no.2
• /
• pp.161-170
• /
• 1994

For the preparation of short ceramic fibers of which average length might be in accordance with the opening size of sieve, e.g., 150${\mu}{\textrm}{m}$ or 300${\mu}{\textrm}{m}$, bulk fibers were grounded on sieve screen by applying both compressing and shearing force, and passed through the sieve screen. The grounded fibers were subjected to gravitational settling processes. The classified fibers were observed by scanning electron microscopy and the length of each fiber was measured to correlate the average length with the opening size of the sieve used for grinding bulk fibers. Theoretical analysis show that a free settling technique is ineffective for the classification of fibers by length compared with that of particles. The average lengths of classified fibers estimated by scanning electron microscopy were in good agreement with those obtained by relative packing volume of the fibers. Accordingly, it is confirmed that average fiber lengths can be determined from bulk volume data without photographing, counting and averaging results for hundreds of fibers.