• Geomechanics and Engineering
• /
• 제34권5호
• /
• pp.577-595
• /
• 2023

A dynamic triaxial discrete element numerical model of lightweight soil was established using the discrete element method to study the microscopic mechanism of expanded polystyrene (EPS) particles in the soil under cyclic loading. The microscopic parameters of the discrete element model of the lightweight soil were calibrated depending on the dynamic triaxial test hysteresis curves. Based on the calibration results, the effects of the EPS particles volume ratio and amplitude on the contact force, displacement field, and velocity field of the lightweight soil under different accumulated strains were studied. The results showed that the hysteresis curves of lightweight soil exhibit nonlinearity, hysteresis, and strain accumulation. The strain accumulated in remolded soil is mainly tensile strain, and that in lightweight soil is mainly compressive strain. As the volume ratio of EPS particles increased, the contact force first increased and then decreased, and the displacement and velocity of the particles increased accordingly. With an increase in amplitude, the dynamic stress of the particle system increased, and the accumulation rate of the dynamic strain of the samples also increased. At 5% compressive strain, the contact force of the particles changed significantly and the number of particles deflected in the direction of velocity also increased considerably. These results indicated that the cemented structure of the lightweight soil began to fail at a compressive strain of 5%. Thus, a compressive strain of 5% is more reasonable than the dynamic strength failure standard of lightweight soil.

• Composites Research
• /
• 제17권1호
• /
• pp.38-46
• /
• 2004

본 논문의 목적은 탄소섬유 건직물의 토우 구조의 미소 거동과 변형 중의 평면 하중과의 관계를 규명하는 것이다. 평면 하중은 변형 중에 토우들을 재배치하며, 결국에는 잠김 현상을 유발하게 된다. 본 논문에서는 토우 간격, 주름각등의 미소 변형 변수들을 관찰하기 위해 일방향 편향 인장실험과 이축 인장실험을 겪은 시편들을 전단각에 따라 분류하여 현미경을 이용하여 변형 경향을 관찰하였다. 전단각에 따른 변형된 토우 구조의 변화를 간단한 설계 변수 모델을 이용하여 근사하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.438-443
• /
• 2005

Laser surface hardening is an effective technique used to improve the tribological properties and also to increase the service life of automobile components such as camshafts, crankshatfs, lorry brake drums and gears. High power CO2 lasers and Nd:YAG lasers are employed for localized hardening of materials and hence are of potential application in the automobile industries. The heat is conducted rapidly into the bulk of the specimen causing self-quenching to occur and the formation of martensitic structure. In this investigation, the microstructure features occurring in Nd:YAG laser hardening SM45C steel are discussed with the use of optical microscopic and scanning electron microscopic analysis. Moreover, This paper describes the optimism of the processing parameters for maximum hardened depth of SM45C steel specimens of 3mm thickness by using CW Nd:YAG laser. Travel speed was varied from 0.6m/min to 1.0m/min. The maximum hardness and case depth fo SM45C steel are 780Hv and 0.4mm by laser hardening.

• 치과방사선
• /
• 제13권1호
• /
• pp.17-27
• /
• 1983

The author observed the effects of /sup 60/Co irradiation on the development and subcellular structure of tongue tissue of the fetal rats. The lower left abdomen of mothers were exposed to radiation on 15½th day of gestation with 300R. The fetuses were removed on the 6hr, 14hr, 24hr, 48hr and 72hr after irradiation and the light microscopic and electron microscopic observations of the lingual epithelium, lamina propria and muscle layer were carried out. The results were as follows: 1. The irradiated fetuses showed the retardation of filiform papillae formation. 2. Epithelial cells revealed fusion and myelination of mitochondria, large autolysosomes, increased lipid droplets, retardation of tonofilaments and desmosome formation. 3. In the lamina propria, undifferentiated cells showed bleb formation of nuclear membrane, pyknosis and fragmentation of nucleus, edema of cytoplasm I and nucleus, increased auto-lysosomes, dilatation of cell membrane and cell necrosis. Also, collagenous fibril formation was inhibited by irradiation. 4. In the muscle layer, growth of myotubes was inhibited. Myotubes showed swelling of mitochondria, loss of mitochondrial cristae, autolysosomes, retardation of myofibril formation, and large vacuoles. Undifferentiated cells adjacent myotube contained pyknotic nucleus and autolysosomes. 5. Among the various tissues of tongue, it seems that mesenchymal cells were most radiosensitive.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.788-792
• /
• 2013

A shortcoming of using transmission electron microscopy (TEM) for structural analysis via electron diffraction is the relatively large error of the measurements as compared to X-ray diffraction. To reduce these errors, various internal standard methods from earlier studies have been widely used. We developed a new device to facilitate the application of internal standard methods in preparation of TEM grids used for nanopowder analysis. Through the application of a partial mask on the TEM grid, both the internal standards and the research materials can be loaded on the same grid. Through this process, we conducted a TEM analysis that compared synthetic hydroxyapatite (HAp) nanopowder to bone apatite from a bovine femur. We determined that the accuracy of the d-spacing measurements of the HAp and bone powders could be improved to better than 1% after statistical treatments of the experimental data. By applying a quarter mask, we loaded four different nanoparticles on a single TEM grid, with one section designated for the internal standard.

• Carbon letters
• /
• 제14권4호
• /
• pp.255-258
• /
• 2013

Flexible transparent conducting films (TCFs) were fabricated by dip-coating single-wall carbon nanotubes (SWCNTs) onto a flexible polyethylene terephthalate (PET) film. The amount of coated SWCNTs was controlled simply by dipping number. Because the performance of SWCNT-based TCFs is influenced by both electrical conductance and optical transmittance, we evaluated the film performance by introducing a film property factor using both the number of interconnected SWCNT bundles at intersection points, and the coverage of SWCNTs on the PET substrate, in field emission scanning electron microscopic images. The microscopic film property factor was in an excellent agreement with the macroscopic one determined from electrical conductance and optical transmittance measurements, especially for a small number of dippings. Therefore, the most crucial factor governing the performance of the SWCNT-based TCFs is a SWCNT-network structure with a large number of intersection points for a minimum amount of deposited SWCNTs.

• 한국실내디자인학회논문집
• /
• 제20권4호
• /
• pp.37-45
• /
• 2011

This thesis sets out to study the immanent mechanism of architecture which had classified as external spaces in general. As human controls a space, it controls or manages human's behavior, too. This study is depended on the humanities to analyze a various operation of power in the architectural space. It makes a comparative study of a space-power in a dwelling space through a discourse of Michel Foucault and Jacques Lacan, in particular everyday's microscopic scope. According to analytical results, the space-power of dwelling falls under the influence of a spacial arrangement and subject's desire. It has shown a noticeable characteristics in aspects production & consumption, using behavior, and use value. As it is seen through the aspects of production & consumption, owns of the space-power in a dwelling could not be its subject. We have also understood about a physicalistic furniture at the using behavior, it has a special power unconsciously to control a human's action and lifestyle. And then in the aspects of use value, the centric theme is a television. It lies on the core of space-power in dwelling, because is profoundly related to an innate respect of a dwelling value. In conclusion, so this study has the important meaning in the side to offer some interpretative possibility about the architectural space-power through a microscopic structure.

• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.28-35
• /
• 2000

As a second part of the comparison study, microscopic features of an air-assisted fuel injector(AAFI) and a high-pressure swirl injector (HPSI) were characterized. They consist of the internal spray structure in terms of fuel mass and drop diameter, the overall atomization performance with respect to operating parameters and the drop size distribution. Large droplets are concentrated in around the head part of a spray field of the HPSI, while in the case of the AAFI, they were distributed in the tail part. Although the AAFI showed the better atomization performance, the feasible ranges of operating parameters such as injection and ambient pressure were found to be wider in the HPSI. Drop size distribution of the AAFI sprays was more dispersed than that of the HPSI. Drop size distribution of the AAFI sprays was more dispersed than that of the HPSI. However, at the well-atomized condition, it appeared to be very uniform.

• 대한치과의사협회지
• /
• 제19권7호통권146호
• /
• pp.625-634
• /
• 1981

A Scanning Electron Microscopic Study of the root surface changes was carried out in advanced periodontal disease. The results obtained were summerized as follow; 1. The root surface of cementoenamel junction of healthy root showed smooth surface, while the root surface of diseased state showed covering of deposits which regareded as a course of calcification. 2. At the mid-portion of the root, the regular cemental projection were observed on the healthy root surface and on the root surface of diseased state, cemental projection showed relatively irregular pattern. 3. On the root surface which consist of wall of periodontal pocket, there were various deposits which could be considered as subgingival calculus, bacterial plaque and epithelial attachment remnant. 4. The bottom area of the pathologic pocket, tearing altered collagen fibers were seen on the root surface. 5. At the apical portion of root surface, calcified fibers ran parallel to the root surface in healthy tooth and the fiber bundles of periodontal ligament were seen in the diseased state.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.246-251
• /
• 2005

Laser surface hardening is an effective technique used to improve the tribological properties and also to increase the service life of automobile components such as camshafts, crankshatfs, lorry brake drums and gears. High power $CO_2$ lasers and Nd:YAG lasers are employed for localized hardening of materials and hence are of potential application in the automobile industries. The heat is conducted rapidly into the bulk of the specimen causing self-quenching to occur and the formation of martensitic structure. In this investigation, the microstructure features occurring in Nd:YAG laser hardening SM45C steel are discussed with the use of optical microscopic and scanning electron microscopic analysis. Moreover, This paper describes the optimism of the processing parameters for maximum hardened depth of SM45C steel specimens of 3mm thickness by using CW Nd:YAG laser. Travel speed was varied from 0.6m/min to 1.0m/min. The maximum hardness and case depth fo SM45C steel are 780Hv and 0.4mm by laser hardening.