• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.6
• /
• pp.671-678
• /
• 2004

Statement of problem. Reducing treatment time in implant dentistry is a matter of main concern. There are so many factors affecting the success rate of immediate or early loaded implant for the initial bone response. The especially microscopic properties of implant surfaces playa major role in the osseous healing of dental implant. Purpose. The aims of this study were to perform a histologic and histomorphometric comparison of the healing characteristics anodically roughened surface, HA coated surface and RBM surface implant, and to compare of ISQ values measured by $Osstell^{TM}$ for resonance frequency analysis in dogs mandible during 2 weeks. Material and method. Bone blocks from 2 dogs were caught after covered healing for 0 day(2 h); Group I, 1 week; Group II and 2 weeks; Group III. One longitudinal section was obtained for each implant and stained with hematoxylin and eosin. Histomorphometric analysis was done with Kappa Imagebase system to calculate bone-to-implant contact and bone volumes inside the threads. ISQ values were measured in every time of surgery schedule. Conclusion. The experiment revealed that: 1. The percentages of bone-to-implant contact on the fixture in each group were not significantly different(P > 0.05). 2. The percentages of bone area inside the threads on the fixture in each group were not significantly different(P > 0.05). 3. The ISQ level showed clinical stability of each fixture during 2 weeks(all ISQ level ${\geq}71$ ).

• Development and Reproduction
• /
• v.20 no.4
• /
• pp.283-288
• /
• 2016

The purpose of the present study was to investigate the morphological characteristics of the developing vallate papillae (VP) of Korean native goats using scanning electron microscopy. In prenatal development of the VP, primordia of the VP were observed and the moat was shallowly spread in 60-day-old fetuses. The moat of the vallate papillae was shallowly spread and still undifferentiated in 90-day-old fetuses. The trench wall of the moat of the VP was well developed in 120-day- old fetuses. In neonates, the moat of the VP was more widely and deeply engraved and VP were developed as completely as those of adults. In postnatal development, VP were observed to have continually increased in size with slight morphological changes until 90-days after birth. Taste pores of the VP were shaped like flower leaves in 120-days after birth. The microridges and microplicaes were well developed on the epithelial surface of the VP in goats ranging from 120-day-old fetuses to 120-day-old postnatal animals. These results suppose that the sensing ability for gestation of VP was already well developed by the time of its birth and VP were differentiated into a variety of different shape and size during development.

• The Journal of Korean Society of Virology
• /
• v.29 no.4
• /
• pp.201-209
• /
• 1999

Results of the studies on the morphologic and molecular biologic characteristics of Hantaan virus (HTNV), one of the etiologic agents of Hemorrhagic fever with renal syndrome (HFRS), revealed that HTNV was a member of Family Bunyaviridae and its RNA divided into three segments. And the nucleotide sequences of these segments also were known and the differences in nucleotide sequences of HTNV from other members of genus Hantavirus were clearly evaluated. But the morphorgenesis, pathogenesis of HFRS and the replication time had not been clearly determined. In this study, to estimate the replication time of HTNV in Vero E-6 cells, Vero cells were infected with HTNV 76/118 strain, and cells were harvested from two hours post-infection up to 24 hours at two hours-intervals. Harvested cells were treated with ordinary techniques for electron microscopy and immune-electron microscopy. And then thin sections were observed under transmission electron microscope. HTNV particles were not found in the cytoplasm and in the extracellular space between $2{\sim}8$ hours after inoculation of virus, but virus particles were observed in extracellular space near the cell membrane of Vero-E6 cells 10 hours after infection. In immune electron microscopy, mature HTNV particles in extracellular spaces and immature virus labelled with gold particles in the cytoplasm of Vero E-6 cell 10 hours after infection of HTNV could be seen. This results suggest that the replication time of HTNV might be about 10 hours.

• Archives of Reconstructive Microsurgery
• /
• v.13 no.2
• /
• pp.101-106
• /
• 2004

Purpose : This study evaluated the effect of VEGF in the arterial anastomosis by using light and electron microscopy. Marerials and method : Rats underwent femoral arterial end-to-end anastomosis after transection and topical VEGF treatment. The proximal and distal segments of the femoral arteries was drenched with 1 drop of VEGF $(100ng/100{\mu}l/bottle)$. and when half of the repair was finished, the other 1 drop was drenched and then the repair was continued to complete the anastomosis. Gross and histologic characteristics of arterial wall were assessed after 3 days, 1, 3 and 5 weeks. In the control group, normal saline solution instead of VEGF was dropped with the same method in the anastomosis. Results : The histologic findings of the arterial wall were the vascular remodeling with the infiltration of inflammatory cells at early stages and the tissue fibrosis at lately stages in the anastomotic sites of the control and the VEGF-treated groups. The scanning electron microscopic results were; (1) the anastomotic sites were covered by many irregular cells with long cytoplasmic processes at the early stages. (2) After 1 week, endothelial cells started to cover the anastomotic sites. (3) After 3 weeks, the anastomotic sites were partially covered by endothelial cells in the control group. (4) After 5 weeks, the anastomotic sites were completely covered by endothelial cells in the control and VEGF-treated groups. (5) In the VEGF-treated group, the anastomotic site was completely covered by endothelial cells which directed parallel to longitudinal axis of arteries after 3 weeks. Conclusion : Topical VEGF maintained luminal integrity by decreasing fibrosis and increasing re-endothelialization. These findings suggest that topical VEGF may be a promising new strategy to enhance healing and improve the outcome of vascular anastomosis.

• Korean journal of food and cookery science
• /
• v.21 no.4 s.88
• /
• pp.528-535
• /
• 2005

This paper aims to compare and evaluate the quality of beef jerky made with Korean beef meat, Korean beef cattle and imported beef meat from Australia and New Zealand through sensory evaluation, measurement of hardness, thickness and contents of the moisture and crude lipid, and microscopic texture observation (SEM). According to the sensory evaluation, beef jerky made with Korean beef meat recorded the highest score in overall acceptability; New Zealand beef meat, the lowest. The preference of beef jerky made with Korean beef meat was shown in the appearance, smell, and texture, and especially in the taste. Whereas Korean beef jerky scored highest in color, glaze and palatability, New Zealand beef meat showed the lowest score. Korean beef meat showed the lowest in hardness, but New Zealand beef meat showed the highest as shown in the result of technical evaluation through rheometer. The evaluation through colormeter concluded that New Zealand beef meat had the highest scores in L and a values, but that Korean beef meat showed the lowest score. When it comes to the color difference compared with Korean beef meat, New Zealand beef meat showed the biggest difference. Although the moisture contents of jerky made with different beef meat showed little difference, the content of the crude lipid of jerky made with Korean beef meat and Australian beef meat was lower than that of Korean beef cattle and New Zealand beef meat. When the beef jerky is dry, fat contained in the beef meat is dissolved, which causes the glaze on the outside. Scanning electron micrographs showed that Korean and Australian beef jerky had larger gaps than Korean beef cattle and New Zealand beef jerky. It was concluded that this affected the hardness of beef jerky.

• Korean Journal Plant Pathology
• /
• v.14 no.5
• /
• pp.408-412
• /
• 1998

In order to illustrate the role of conidia of Mycosphaerella nawae as a secondary inoculum in nature, pseudothecial development on persimmon leaves was investigated microscopically. The fungal ascospores have been believed as the primary or only inoculum source in nature, however, pseudothecia were readily formed on persimmon leaves infected naturally and artificially by conidia. The pseudothecia of M. nawae were found to form in the tissues of infected leaves while the leaves were still hanging on the trees. The size of pseudothecia were approximately 51.0~122.4$\times$51.0~112.2 ${\mu}{\textrm}{m}$ (82.8 $\times$72.5 ${\mu}{\textrm}{m}$in average), the shapes were spherical, ovoid or occidental pear type. The sizes of asci were approximately 30.6~61.2$\times$8.2~10.2 ${\mu}{\textrm}{m}$(46.6$\times$9.4 ${\mu}{\textrm}{m}$ in average) and the shapes were cylinder or banana. The ascospores were mostly spindle type, and the sizes were 10.2~12.2$\times$3.1~4.1 ${\mu}{\textrm}{m}$ (11.4$\times$3.2 ${\mu}{\textrm}{m}$ in average)-like. The pseudothecial formation was initiated before defoliation and morphological characteristics of the pseudothecia, ascus and ascospores on the infected leaves were fully illustrated in this study. Results indicated that conidia of M. nawae induce circular leaf spot of persimmon as much as ascospores, and might play an important role of the disease epidemics in nature.

• Parasites, Hosts and Diseases
• /
• v.42 no.1
• /
• pp.27-34
• /
• 2004

We investigated the optimal culture conditions for Cryptosporidium muris in a human stomach adenocarcinoma (AGS) cell line by determining the effects of medium pH and of selected supplements on the development of C. muris. The optimum pH of the culture medium required for the development of C. muris was determined to be 6.6. The number of parasites significantly increased during cultivation for 72 hr (p < 0.05) at this level. On the other hand, numbers decreased linearly after 24 hr of incubation at pH 7.5. When cultured in different concentrations of serum, C. muris in media containing 5% FBS induced 4-7 times more parasites than in 1% or 10% serum. Of the six medium supplements examined, only 1 mM pyruvate enhanced the number of C. muris in vitro. Transmission electron microscopic observation showed the developmental stages of C. muris in the cytoplasm of the cells, not in an extracytoplasmic location. The growth of C. muris in AGS cells provides a means of investigating its biological characteristics and of testing its response to therapeutic agents. However, a more optimized culture system is needed for the recovery of oocysts on a large scale in vitro.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.4
• /
• pp.73-82
• /
• 2015

Despite significant effects on macroscopic migration and distribution of CO₂ injected during geological sequestration, only limited information is available on wettability in microscopic scCO₂-brine-mineral systems due to difficulties in pore-scale observation. In this study, a micromodel had been developed to improve our understanding of how scCO₂ flooding and residual characteristics of porewater are affected by the wettability in scCO₂-water-glass bead systems. The micromodel (a transparent pore structure made of glass beads and glass plates) in a pressurized chamber provided the opportunity to visualize scCO₂ spreading and porewater displacement. CO₂ flooding followed by fingering migration and dewatering followed by formation of residual water were observed through an imaging system. Measurement of contact angles of residual porewater in micromodels were conducted to estimate wettability in a scCO₂-water-glass bead system. The measurement revealed that the brine-3M NaCl solution-is a wetting fluid and the surface of glass beads is water-wet. It is also found that the contact angle at equilibrium decreases as the pressure decreases, whereas it increases as the salinity increases. Such changes in wettability may significantly affect the patterns of scCO₂ migration and porewater residence during the process of CO₂ injection into a saline aquifer at high pressures.

• Korean Journal of Food Science and Technology
• /
• v.21 no.4
• /
• pp.549-555
• /
• 1989

The effect of high temperature aging on the meat tenderness improvement was studied, and also the effect of salt, pyrophosphate and succinic anhydride on binding characteristics of restructed beef were compared. At high temperature aging, shear force value decreased and myofibrillar fragmentation index increased as the aging progressed. From the electronic microscopic observation, the morphological change of myofibril appeared much faster when the meat was aged at high temperature. Added salt increased TBA values and rupture strength while reducing cooking loss. Increase in pyrophosphate decreased rooking loss and Increased rupture strength and TBA value. When salt and pyrophosphate were combined, the effects were somewhat additive. Added succinic anhydride increased cooking loss and hardness and decreased color rating, acceptability rating and adhesiveness, but cohessiveness was not significantly different from control group containing salt and pyrophosphate. The results suggest that high temperature aging have greater improving effect of meat tenderness of Korean native male cattle compared to low temperature aging and addition of succinic ahydride in combination with salt and pyrophosphate reduce binding ability of restructured beef.

• Journal of Periodontal and Implant Science
• /
• v.45 no.3
• /
• pp.94-100
• /
• 2015

Purpose: The aim of this study was to investigate the combined effects of physical and chemical surface factors on in vivo bone responses by comparing chemically modified hydrophilic sandblasted, large-grit, acid-etched (modSLA) and anodically oxidized hydrophobic implant surfaces. Methods: Five modSLA implants and five anodized implants were inserted into the tibiae of five New Zealand white rabbits (one implant for each tibia). The characteristics of each surface were determined using field emission scanning electron microscopy, energy dispersive spectroscopy, and confocal laser scanning microscopy before the installation. The experimental animals were sacrificed after 1 week of healing and histologic slides were prepared from the implant-tibial bone blocks removed from the animals. Histomorphometric analyses were performed on the light microscopic images, and bone-to-implant contact (BIC) and bone area (BA) ratios were measured. Nonparametric comparison tests were applied to find any significant differences (P<0.05) between the modSLA and anodized surfaces. Results: The roughness of the anodized surface was $1.22{\pm}0.17{\mu}m$ in Sa, which was within the optimal range of $1.0-2.0{\mu}m$ for a bone response. The modSLA surface was significantly rougher at $2.53{\pm}0.07{\mu}m$ in Sa. However, the modSLA implant had significantly higher BIC than the anodized implant (P=0.02). Furthermore, BA ratios did not significantly differ between the two implants, although the anodized implant had a higher mean value of BA (P>0.05). Conclusions: Within the limitations of this study, the hydrophilicity of the modSLA surface may have a stronger effect on in vivo bone healing than optimal surface roughness and surface chemistry of the anodized surface.