• Journal of Sericultural and Entomological Science
• /
• v.27 no.2
• /
• pp.28-39
• /
• 1985

The structural and useful characteristics of silk habutae treated with silicone resin by emulsion finishing method were studied. The results were obtained through crease recovery test, water repellency test, scanning micrograph observation, amino acid analysis, X-Ray diffraction analysis, and Fourier Transform Infrared Spectroscopy. The results are summarized as follows; 1) The improvement in crease recovery of silk habutae finished with silicone resin, was observed b soaping treatment and curing conditions. 2) The higher water repellency and stiffness in silk fabrics finished with silicone resin was found by the fabric inspection and the scanning electron microscopic observation. It is suggested that silicone resin impregnated into the void of silk fibroin. 3) The polar side chains of amino acid composition were decreased, when the silicone resin was treated on silk fibroin. 4) Through Amino acid analysis of silicone resin finished fibroin, the different amounts of amino acid composition was indicated due to silk fibroin silicone polymer reaction and the structural difference of its fibroin were also proved by X-ray diffractograms. 5) The functionality of the siloxane compound may be deduced from the silicone finished silk habutae by Fourier Transform Spectroscopy. It was concluded from the above results that the useful characteristics of silk fabric can be improved by silicone resin finishing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.8
• /
• pp.616-619
• /
• 2012

Oxides possess several interesting properties, such as ferroelectricity, magnetism, superconductivity, and multiferroic behavior, which can effectively be used oxide electronics based on epitaxially grown heterostructures. The microscopic properties of oxide interfaces may have a strong impact on the electrical transport properties of these heterostructures. It was recently demonstrated that high electrical conductivity and mobility can be achieved in the system of an ultrathin $LaAlO_3$ film deposited on a $TiO_2$-terminated $SrTiO_3$ substrate, which was a remarkable result because the conducting layer was at the interface between two insulators. In this study, we observe that the current-voltage characteristics exhibit $LaAlO_3$ thickness dependence of electrical conductivity in $TiO_2$-terminated $SrTiO_3$. We find that the $LaAlO_3$ layers with a thickness of up 3 unit cells, result in highly insulating interfaces, whereas those with thickness of 4 unit cells and above result in conducting interfaces.

• Health Policy and Management
• /
• v.9 no.1
• /
• pp.72-109
• /
• 1999

This study is conducted to investigate the current status on the utilization of health care and plan for solving this problem. The claims data of the fiscal tear 1995 obtained from the regional health insurance society are used for the study. The main findings of the study are summarized as follows. Indexes(The Extremal Quotient(EQ), coefficients of variance(CV's))which represent the regional difference in the admission rate of the tertiary medical diagnosis group report that there is difference in quantity and quality of utilization of health care. The admission rate is lower in the big city areas, Kyoungkido, Kangwondo and Chunlapukdo. Even after age-sex adjustment, the admission rate is still low in Kangwondo, Chunlapukdo and Kyoungsangpukdo. The big city areas tend to have higher rates in the expenses per claim, hospital days per claim, and daily expenses but the rates are still low in some area in Kangwondo, Chunlanamdo and Kyoungsangpukdo. This result remains as same after age-sex adjustment. There is a large regional difference in average utilization rate for the tertiary hospital of the tertiary medical diagnosis group: 57.2%(SD 11.53). The utilization rates for the tertiary hospital in their large catchment area are 96.34%, 83.19% and 73.22% in each Kyoungin, Kyoungnam and Kyoungpuk areas whereas it is lower in a Chungpuk and Chungnam areas. The regional differences of health care utilization of the tertiary medical diagnosis group gave some relationships with their geographical characteristics such as socio-economic characteristics and supply factors of medical services. It is important that many medical policies should be developed in order to minimize and balance out the regional differences of health care utilization. The service allocation policy should include the reconstruction of manpower policy, developing the resource allocating formula, finding the self-sufficient catchment area and reforcing of public health services. Moreover, in order to achieve the balanced development by region, they should investigate and consider each county's microscopic properties under the consistent macrocopic policy. The further studies to find causes of regional difference are needed.

• The Korean Journal of Malacology
• /
• v.27 no.4
• /
• pp.377-386
• /
• 2011

The ultrastructures of germ cells during spermatogenesis and sperm morphology in male Mya arenaria oonogai, which was collected on the coastal waters of Samcheonpo, south coast of Korea, were investigated by transmission electron microscopic observations. In the early stage of the spermatid during spermiogenesis, a few granules and a proacrosomal granule, which is formed by the Golgi complex, appear on the spermatid nucleus, and then it becomes a proacrosomal vesicle. Consequently, it becomes an acrosome by way of the process of acrosome formation. The morphologies of the sperm nucleus type and the acrosome of this species have a curved cylindrical type and cone shape, respectively. The spermatozoon is approximately $48-50{\mu}m$ in length including a curved cylinderical sperm nucleus (about $2.65{\mu}m$ long), an acrosome (about $0.64{\mu}m$ in length) and tail flagellum ($40-45{\mu}m$ long). As some ultrastructural characteristics of the acrosomal vesicle, the peripheral parts of two basal rings show electron opaque part (region), while the apex part of the acrosome shows electron lucent part (region). These charateristics of the sperm belong to the family Myidae or some species of Veneridae in the subclass Heterodonta, unlike a characteristic of the subclass Pteriomorphia showing all part of the acrosome being composed of electron opaque part (region). Therefore, it is easy to distinguish the families or the subclasses by the acrosome structures. Exceptionally, In particular, a cylinder-like nucleus of the sperm is curved (the angle of the nucleus is about $20^{\circ}$), as seen in some species of Veneridae (range from $0^{\circ}-80^{\circ}$). The number of mitochondria in the midpiece of the sperm of this species are four, as one of common characteristics appeared in most species except for a few species in Veneridae in the subclass Heterodonta. Cross-sectioned axoneme of the sperm tail flagellum shows a 9+2 structure: the axoneme of the sperm tail flagellum consists of nine pairs of peripheral microtubules at the periphery and a pair of central doublets at the center.

• The Korean Journal of Malacology
• /
• v.30 no.3
• /
• pp.211-218
• /
• 2014

Spermatid differentiations during spermiogenesis and sperm ultrastructures in male Mercenaria stimpsoni were investigated by transmission electron microscopic observations. In the early stage of the spermatid during spermiogenesis, a few granules and a proacrosomal granule, which is formed by the Golgi complex, become a proacrosomal vesicle. Consequently, it becomes an acrosome by way of the process of acrosome formation. The morphologies of the sperm nucleus type and the acrosome of this species have a curved cylindrical type and cap shape, respectively. The spermatozoon is approximately $48-51{\mu}m$ in length including a curved cylinderical sperm nucleus (about $4.18{\mu}m$ long), an acrosome (about $0.52{\mu}m$ in length) and tail flagellum ($42-45{\mu}m$ long). As some ultrastructural characteristics of the acrosomal vesicle, the peripheral parts of two basal rings show electron opaque part (region), while the apex part of the acrosome shows electron lucent part (region). These charateristics of the sperm belong to the family Veneridae in the subclass Heterodonta, unlike a characteristic of the subclass Pteriomorphia showing all part of the acrosome being composed of electron opaque part (region). Therefore, it is easy to distinguish the families or the subclasses by the acrosome structures. Exceptionally, In particular, a cylinder-like nucleus of the sperm is curved (the angle of the nucleus is about $80^{\circ}$), as seen in some species of Veneridae (range from $0^{\circ}$ to $80^{\circ}$). The number of mitochondria in the midpiece of the sperm of this species are four, as one of common characteristics appeared in most species except for a few species in Veneridae in the subclass Heterodonta. Cross-sectioned axoneme of the sperm tail flagellum shows a 9+2 structure.

• The Korean Journal of Zoology
• /
• v.32 no.3
• /
• pp.221-231
• /
• 1989

The histochemical characteristics of the cutaneous mucous glands and its fine structure of the Korean fire bellied toad, Bombina orientolis Boulenger, were studied with light and electron microscopes. The mucous glands of the toad are simple alveolar gland, and are composed of inner glandular epithelial cells and outermost myoepithelial cells. Histochemical studies suggest that main secretory materials released from the mucous glands might be acid mucopolysaccharides which is more abundant in the ventral skin than in the dorsal skin. The scanning electron microscopic observation showed that the morphology of the opening sites of the gland duct is similar to the morphology of stomata on the plant leaves. Glandular epithelial layers of the mucous glands are composed of two cell types, the mucous secreting cells and the mitochondria rich cells. The mucous secreting cells could be classified according to the morphology and inner textures of cytoplasm and those characteristics were seemed to be related to the degree of maturation of the cells. Furthermore the mucous within the mucous secreting cells appears to be synthesized in the rough endoplasmic reticulum.

• Korean Journal of Materials Research
• /
• v.13 no.7
• /
• pp.429-435
• /
• 2003

In this study the new creep test using miniaturized specimen(10${\times}$10${\times}$0.5 ㎣) was performed to evaluate the creep characteristics for degraded materials of 2.25Cr-1Mo steel. For this creep test, the artificially aged materials for 330 hrs and 1820hrs at $630^{\circ}C$ were used. The test temperatures applied for the creep deformation of miniaturized specimens was X$630^{\circ}C$ and the applied loads were between 45 kg∼80 kg. After creep test, macro- and microscopic observation were conducted by the scanning electron microscope(SEM). The creep curves depended definitely on applied load and microstructure and showed the three stages of creep behavior like uniaxial tensile creep curves. The load exponents of virgin, 330 hrs and 1820 hrs materials based on creep rate showed 14.8, 9.5 and 8.3 at $550^{\circ}C$ respectively, The 1820 hrs material showed the lowest load exponent and this behavior was also observed in the case of load exponent based on creep rupture time. In contrast to virgin material which exhibited fined dimple fractography, a lot of carbides like net structure and voids were observed on the fractography of degraded materials.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.5
• /
• pp.791-799
• /
• 1997

The wear characteristics and wear mechanisms of plasma sprayed Al/sub 2/ O/sub 3/-40%TiO/sub 2/ and Cr/sub 2/O/sub 3/ deposited on casting aluminum alloy(AC4C) were investigated. Specimens were processed for various coating thicknesses. Ball on disk type wear tester was used for wear test. The scratch test on plasma sprayed coating surface showed that critical load to break the coating layer was greater than 40 N. The critical load increase with the increase of coating thickness of specimens. The friction coefficient of Cr/sub 2/O/sub 3/ coating layer was less than that of Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer. The wear resistance of Cr/sub 2/O/sub 3/ coating layer was greater than that of Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer. Microscopic observation of worn surfaces was made by SEM. SEM observation showed that the main mechanism of wear for Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer was abrasive wear under 50 N. For the case of Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer, as the surface cracks perpendicular to sliding direction propagated, the wear debris was generated in wear track. However, the main mechanism of wear for Cr/sub 2/O/sub 3/ coating layer was brittle fracture under 150 N.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.8
• /
• pp.42-47
• /
• 2010

In this paper, the characteristics of contact surface damage due to fretting in a press-fitted shaft below the fretting fatigue limit are proposed by experimental methods. A series of fatigue tests and interrupted fatigue tests of small scale press-fitted specimen were carried out by using rotating bending fatigue test machine. Macroscopic and microscopic characteristics were examined using scanning electron microscope (SEM), optical microscope or profilometer. It is found that fretting fatigue cracks were initiated even under the fretting fatigue limit on the press-fitted shafts by fretting damage. The fatigue cracks of press-fitted shafts were initiated from the edge of contact surface and propagated inward in a semi-elliptical shape. Furthermore, the fretting wear rates at the contact edge are increased rapidly at the initial stage of total fatigue life. After steep increasing, the increase of wear rate is nearly constant under the load condition below the fretting fatigue limit. It is thus suggested that the fretting wear must be considered on the fatigue life evaluation because the fatigue crack nucleation and propagation process is strongly related to the evolution of surface profile by fretting wear in the press-fitted structures.

• Journal of the Korean Home Economics Association
• /
• v.47 no.1
• /
• pp.45-54
• /
• 2009

The purpose of the study is to examine the characteristics of the ideal housing for the modern family suggested by the Home Exposition (September, 1915) under the Japanese colonial rule in the macroscopic context of social change and the microscopic context of family. Through this research, we expect to have a partial understanding not only of changes in the outward appearance of traditional housing spaces during the civilization period and the early Japanese colonial rule when foreign cultures began to be introduced but also of families'residential lives and the patterns of change in people's consciousness of housing. Major conclusions from the current analysis are as follows. First, there were some changes in family paradigm induced through a home exhibition. Second, the most important factor for an ideal housing was that it must be the source of harmonic and healthy family life. Third, the importance of an appropriate space norm should be emphasized by providing the minimum size of each room. Fourth, the significance of the housing values of the economy, convenience, and hygiene should be emphasized for the ideal housing. Lastly, it was implied that for an ideal housing, the social and psychological aspects of housing must be satisfied along with the physical aspects. The limitation was that the model of ideal family housing presented in the Home Exposition cannot exclude the characteristics of the colonial perspectives in that it was followed by the model for the Japanese families.