• Proceedings of the KWS Conference
• /
• 2001.10a
• /
• pp.220-222
• /
• 2001

The average grain size, the grain-size distribution, the morphology and the microstructure are fundamental characteristics of a spraying powder. Now that the significance of the grain size for the pattern of properties of the powder has been recognised, greater consideration is also being given to it in standards and regulations. However, unfortunately, the processes according to which the grain size and the grain-size distribution must be determined are specified in the rarest of cases. The contribution therefore dealt with the comparison of different particle-size measuring techniques, such as diffraction spectroscopy, sedimentation, sieving and microscopic measurement. The comparability of the measured results was investigated on twelve plasma spraying powders with different compositions, nominal sizes and morphologies.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.30-31
• /
• 2013

In this study, characteristics of the concrete replaced in large amount with blast furnace slag is analyzed by the microscopic analyses in the process of the mock-up testing to apply to the actual practice in the area of the general strength by activating a small amount of cement(25%) replaced in large amount of finely powered blast furnace slag.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.117-126
• /
• 2015

PURPOSES : This study aims to investigate the direct and indirect influence areas from incidents on urban interrupted roadways and to develop traffic management strategies for each influence area. METHODS : Based on a literature review, various traffic management strategies for certain incidents were collected. In addition, the relationship between the measure of effectiveness and the characteristics of incidents was explored using an extensive simulation study. RESULTS : From the simulation studies, traffic delays increased as the number of lane closures increased, and the impact of lane closures was reduced to the direction upstream from the incident site. However, the magnitude of the delay change depended on the degree of saturation. Using these characteristics, the direct and indirect influence areas resulting from incidents were defined, and traffic management strategies were established for each direct and indirect influence area and for each level of incident. CONCLUSIONS: The results of this study will contribute to the improvement of national traffic safety by preventing secondary incidents and by effective adaptation to incident events.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.7 s.250
• /
• pp.857-864
• /
• 2006

Various compressive specimens were fabricated using autoclave do-gassing moulding to find out the compressive characteristics of the carbon/epoxy plain weave fabric composites with respect to the bias and shear angles. The stacking angles of the bias specimens are $[0]_{10T,}\;[3]_{10T,}\;[6]_{10T,}\;[9]_{10T,}\;[12]_{10T,}\;[15]_{10T,}\;[30]_{10T,}\;[45]_{10T}$ and those of the sheared specimens are $[{\pm}37]_{10T,}\;[{\pm}32]_{10T,}\;[{\pm}28]_{10T,}\;[{\pm}22]_{10T,}$ respectively. In order to verify the effect of micro-tow structures on compressive strength and modulus of the composites, compressive test specimens of uni-directional carbon/epoxy composites with the same materials and the same stacking conditions were fabricated. The modulus and strength of both types of composite specimens were compared with the prediction results based on the CLPT and a proposed strength formula. The tow deformation and fracture modes were investigated by microscopic observation.

• The Korean Journal of Mycology
• /
• v.47 no.4
• /
• pp.319-328
• /
• 2019

As an effort to explore fungal diversity, fungal survey was undertaken in 2018 in Jangheung, Korea. For the survey, medicinal plant leaves were sampled from Selaginella tamariscina, Serratula coronata ssp. insularis, Scutellaria baicalensis, Scrophularia buergeriana and subjected to fungal isolation. Four unrecorded fungal species, Paraboeremia selaginellae, Colletotrichum camelliae, Alternaria eichhorniae, and Phomopsis capsici were obtained from the survey. This study described their morphological characteristics including colony features formed on media, light microscopic images and molecular characteristics of nucleotide sequences of the ITS and 28S rDNA regions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.645-645
• /
• 2013

Applying a first-principles computational approach combining density-functional theory and matrix Green's function calculations, we have studied the effects [2+2] cycloaddition olligormerization of fullerene $C_{60}$ chains on their junction charge transport properties. Analyzing first the microscopic mechanism of the switching realized in recent scanning tunneling microscope (STM) experiments, we found that, in agreement with experimental conclusions, the device characteristics are not significantly affected by the changes in electronic structure of $C_{60}$ chains. It is further predicted that the switching characteristics will sensitively depend on the STM tip metal species and the associated energy level bending direction in the $C_{60}-STM$ tip vacuum gap. Considering infinite $C_{60}$ chains, however, we confirm that unbound $C_{60}$ chains with strong orbital hybridizations and band formation should in principle induce a much higher conductance state. We demonstrate that a nanoelectromechanical approach in which the $C_{60}-STM$ tip distance is maintained at short distances can achieve a metal-independent and drastically improved switching performance based on the intrinsically better electronic connectivity in the bound $C_{60}$ chains.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.372-380
• /
• 2003

Impact tests were conducted to study the effect of angle ply and metal laminate on impact damage characteristics of Fiber Metal laminates (FML). Impact tests were conducted using drop weight impact machine and damage behavior were analyzed by comparing with load-displacement curve and surface observation and microscopic observation of cross sections. The effect of angle ply on impact characteristics of FML are influenced by property of metal laminate. i.e., when the metal laminate is not enough to strong to prevent fiber debonding, Angle ply FML is superior to singly oriented ply (SOP) FML because angle ply enhance the stiffness by fiber supports and prevent (rack propagation. However, when the metal laminate is enough to strong to prevent fiber debonding, SOP FML is superior to Angle ply FML because the fiber of lower ply in Angle ply FML are more stressed than that of SOP FML.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.10
• /
• pp.1310-1319
• /
• 1999

High-pressure swirl injectors have usually been employed in Gasoline direct injection engines due to their spray characteristics and the feasibility of their control. Thus the microscopic characteristics of high-pressure swirl spray were investigated by PDA. The correlation between axial and radial velocities and the correlation between droplet size and axial velocity were examined with different axial and radial positions. Two dimensional droplet velocity and its number distribution with size-classified droplets were illustrated. The mean droplet velocity and its SMD were also analyzed at the center of spray, the position having maximum mean axial velocity, and the spray periphery using time dividing method. Finally, the structure of high-pressure swirl spray was presented with the size distribution and velocity profile of droplets.

• Research in Plant Disease
• /
• v.17 no.2
• /
• pp.216-221
• /
• 2011

A representative isolate KU53 of the predominant Penicillium species was obtained from rice samples from rice processing complexes of National Agricultural Cooperative Federation in Korea. In this study, isolate KU53 was identified by its morphological and molecular characteristics. The macro- and microscopic characteristics of isolate KU53 were compared with the P. fellutanum reference isolate KCTC16913 on different media; isolate KU53 was generally identical to those of the reference isolate KCTC16913. In a molecular-based identification, the ${\beta}$-tubulin and translation elongation factor 1-alpha sequences of isolate KU53 was most closely related to those of P. fellutanum. Thus, isolate KU53 from stored rice could be identified as P. fellutanum, some isolates of which are known to produce mycotoxin-related metabolites. To our knowledge, this is the first detection of P. fellutanum from stored rice in Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.6
• /
• pp.557-562
• /
• 1995

In this study, characteristics of chick primordial germ cells (PGCs), which is the founder cell of the germline, and gonadal development of the chick embryo between 12hrs and 6 day of incubation were investigated by transverse serial sections of chick embryos under the light microscopic observation. In embryo stage 20 (3 day of incubation), there are a lot of PGCs at the mesenchym, which were moving to the thickened epithelium (gonadal ridge). The PGCs arrive at both right and left gonad primordial in equal number prior to stage 24 (4 day of incubation), but in the following stages, the distribution of the PGCs became asymmetrical. More PGCs colonized the left than the right gonad, but the reason for the unequal distribution of PGCs is uncertain. The PGCs have mostly settled in the gonadal ridge (GR) at 6 day embryo. This study was conducted to investigate characteristics of the PGC migration and gonadal formation and observe the best condition for PGC isolation, culture and to attempt the possibility of the production for transgenic germline chimeras with manipulated PGCs.