• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.132-133
• /
• 2018

The In this study, the change of composition of the hydrates according to the recovery age of concrete in the case of fire damage was confirmed through microscopic analysis. In 28 days of age, the production of ettringite was higher than that of day 1, and the calcium hydroxide was increased in the 91 day. It has been recovered through the generation of major hydrates which affect the strength.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.221-224
• /
• 1996

We synthesized amphiphilic material including dye skeleton, p-phenylenediamine(PD) by attaching norma-decyl group of two strands at a part of coordinating atom, for obtaining reasonable design of LB uniform films. The synthesis of this compounds was quantitatively carried out under ultra pure state. This product was identified with FT-lR spectroscopy, UV absortion spectroscopy, and $^1$H-NMR spectroscopy, respectively. When manufacturing monolayer, we confirmed molecular area from pressure-area($\pi$-A) cutie of thiscompound onto the surface of the water. The spectroscopic approach also has done by UV absortion spectroscopy. It was shown that PD-complex LBfilms were deposited well with monolayer thickness. The conductivity based on I-V characteristics of PD-complex LB films were in the range of 10$^{-10}$ S/cm at room temperture. The microscopic properties by AFM, showed the good orientation of various monolayer or multilayer molecules

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1131-1134
• /
• 2000

Hydroxyapatite (HA) ceramic was prepared using tuna bone powders and was characterized on properties of sintered samples. The aim was to prepare dense and bulk HA sintered suitable for clinical applications. Thermal analysis, X-ray diffraction analysis, microscopic observation, and mechanical evaluation were applied to characterize sintered HA to find optimum processing condition. The major phase of sintered HA was observed up to 1300$\^{C}$ and $\beta$-TCP was observed as temperature increased. The density of sintered HA was increased up to 1350$\^{C}$ and decreased with further increasing temperature. The flexural strength of sintered HA at 1350$\^{C}$ showed 58 MPa as the highest value in this work. The results suggest that the crystal phase and transformation characteristics of HA prepared from tuna bone are the same as the behavior of HA powders made by chemical synthesis.

• YAKHAK HOEJI
• /
• v.46 no.3
• /
• pp.192-196
• /
• 2002

To investigate the effect of intravenous ethanol administration on pancreatic exocrine secretion, we measured volume and protein amount in pancreatic juice and assayed amylase activity and phospholipase $A_2$ activity in pancreatic fragments and serum. Acute pancreatitis induced by obstruction of common bile-pancreatic duct (CBPD) and caerulein infusion (5 $\mu\textrm{g}$/kg/hr) showed typical characteristics, such as hyperamylasemia and pancreatic edema and increase of phospholipase $A_2$ activity in pancreatic fragments and serum. Intravenous ethanol infusion (50 mg/kg/hr) significantly stimulated pancreatic exocrine secretion, but such a stimulatory effect of ethanol disappeared at dose of 100 mg/kg/hr without typical symptoms of acute pancreatitis. In microscopic examination, there were no typical changes of edematous pancreatitis in ethanol administrated rats. These results suggest that acute ethanol administration has dual effect on exocrine pancreatic secretion: low dose of ethanol (50 mg/kg/hr) stimulates pancreatic exocrine secretion, whereas high dose of ethanol (100 mg/kg/hr) does not without typical changes of edematous pancreatitis.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.4
• /
• pp.298-307
• /
• 2007

In recent years, researchers are actively investigating new methods that are applicable for manufacturing micrometer to nanometer scale structures. Among them, optical tweezers that can manipulate microscopic objects using a laser is receiving one of the key attentions. Optical tweezers have been used actively in the field of science. For example, for measuring mechanical characteristics in the scale of piconewtons or for manipulating and sorting large numbers of particles, bacteria, cells. etc. However, little works have been reported for "manufacturing" objects. In this paper, we present a new method for manufacturing micrometer scale structures using micrometer scale biotin coated polystyrene particles. Particles will be controlled with a user interface that utilizes a CyberGlove and glued together by the bonding force between biotin and streptavidin.

• Microbiology and Biotechnology Letters
• /
• v.24 no.4
• /
• pp.445-451
• /
• 1996

The strain YCH-37, which produces yeast cell wall lytlc enzyme, was isolated from soil. From the microscopic observation, morphological and cultural characteristics, this strain was identified to fungus, Dicyma sp. So, we named this strain as Dicyma sp. YCH-37. The lytic enzyme effectively lysed Salmonella typhimurium among intact living bacteria and Torulopsis, Hansenula, Zygosaccharomyces among intact living yeast, as well as autoclaved yeast strains. The yeast cell wall lytic enzyme was succesively purified to 204 folds with 13% yields through yeast glucan affinity adsorption and DEAE-cellulose column chromatography. The enzyme was identified to monomeric protein with molecular weight of 25,000 daltons from the results of SDS-PAGE and gel filtration. The optimum pH and temperature for the yeast lytic activity were 8.0 and 50$\circ$C, respectively. The enzyme was stable up to 40$\circ$C, and between pH 4.0-pH 10.0.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.1
• /
• pp.115-128
• /
• 2003

To comparison the surface treatment methods of stone board materials, the results of Dorry's abrasive test were 23.4 for water-jet system and 18.9 for flame-burner system. Therefore abrasive hardness, the stone board materials by the water-jet system was greater than one by flame-jet system. As a result of Shore's hardness test, the stone board materials by water-jet system was twice greater than one by flame-jet system. Authors carried out microscopic observation to survey a defection of the composition minerals for two methods, but all of the both methods have not founded a defection. Therefore, the stone board materials by water-jet system was greater durability than one by flame-jet for the surface treatment methods.

• The Korea Journal of Herbology
• /
• v.20 no.3
• /
• pp.9-18
• /
• 2005

Objectives : The purpose of this study is to investigate characteristics of cell morphology of two different agar woods (Aquilaria agallocha Roxburgh (AAR) and imitative agar wood (IAW)) using microscopic techniques. Methods : Both light and scanning electron microscopes were used to observe morphological and histological features of the cell of agar woods collected from commercial products in the market. Results : The cell morphology and tissue arrangements of AAR depending on either the adsorption of resin into vessels or no adsorption of resin were observed to compare these features with those of both IAW and Aquilaria sinensis Gilb (ASG). Conclusions : As a result, the vessels of AAR with the resin adsorption was packed with lots of yellow-brownish materials, which were quite different from those of IAW and ASG. The cell walls were thick, and had well-developed traumatic parenchyma tissues with squared cells of the same height and width, which appeared as a clump of small grains packed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.143-148
• /
• 1996

In this paper, we have studied internal quality including chemical compositions, microscopic structure and nonmetalic inclusion of test materials. We have analyzed dynamic characteristics of cutting force of milling including tensile strength value hardness etcs. Test materials are used the tempered carbon steel and the non-tempered carbon steel. The obtained results are as follows: 1.In analyzing internal quality, the tempered carbon steel have typical martensite structure and the non-tempered carbon steel have ferrite+pearlite structure. 2.Yield strength, tensile strength and hardness value are in the non-tempered carbon steel but elongation is maximum value in the tempered carbon steel. 3.Cutting force is smaller non-tempered carbon steel than tempered carbon steel when feed speed and depth of cut is constant. 4.Cutting force is smaller to the tempered carbon steel and smaller non-tempered carbon steel than tempered carbon steel when cutting conditions

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.51-57
• /
• 2008

Recently, the manufacturer of microscopic structures along with the development of technology to produce electronics, communication and semiconductors allows various components to be smaller in size, with higher precision. Therefore, preoccupancy of micro/nano-level machining technology in order to product micro/nano-components and parts is key issue in the field of manufacturing. In this study, machinability of micro machining was studied through the machining of aluminum, brass and steel workpiece. Inspection of the cutting force variation patterns of large numbers of micro machining indicated that characteristics of the workpiece. Surface roughness prediction methods were developed by considering the variation of the static part of the feed direction cutting force. The accuracy of the proposed approaches were tested with experimental data and the agreement between the predictions and actual observations are addressed.