• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.281-283
• /
• 1995

Deadbeat controlled PWM Inverter is realized. This PWM inverter performs the instantaneous control method which is based on the real-time digital feedback control and the microprocessor-based deadbeat control. For the deadbeat current controller, the system's order becomes a high order and increases computation delay time. Therefore, The delay tine produces current ripple. To minimize the current ripple, a new method based on deadbeat control theory for current regulation is proposed. It is constructed by a reduced-order state observer which predicts the output current in next sampling instant.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.300-302
• /
• 1995

This paper describes a current control method for a single-phase PWM inverter. The proposed PWM inverter utilizes the instantaneous control method which is based on the real-time digital feedback control and the microprocessor-based deadbeat control. For the deadbeat current controller, the system's order becomes a high order and increases computation delay time. Therefore, The delay time produces current ripple. To minimize the current ripple, a new method based on deadbeat control theory for current regulation is proposed. It is constructed by a reduced-order state observer which predicts the output current in next sampling instant.

• Nuclear Engineering and Technology
• /
• v.50 no.4
• /
• pp.570-581
• /
• 2018

Recently, a software program has been used in nuclear power plants (NPPs) to digitalize many instrumentation and control systems. To guarantee NPP safety, the reliability of the software used in safetycritical instrumentation and control systems must be quantified and verified with proper test cases and test environment. In this study, a software testing method using a simulation-based software test bed is proposed. The test bed is developed by emulating the microprocessor architecture of the programmable logic controller used in NPP safety-critical applications and capturing its behavior at each machine instruction. The effectiveness of the proposed method is demonstrated via a case study. To represent the possible states of software input and the internal variables that contribute to generating a dedicated safety signal, the software test cases are developed in consideration of the digital characteristics of the target system and the plant dynamics. The method provides a practical way to conduct exhaustive software testing, which can prove the software to be error free and minimize the uncertainty in software reliability quantification. Compared with existing testing methods, it can effectively reduce the software testing effort by emulating the programmable logic controller behavior at the machine level.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.283-287
• /
• 1989

This paper presents a microprocesser based Self-Controller for a Permanent Magnet Synchronous Motor(PMSM), fed by voltage soure inverter. The proper operation of the PMSM can be ensured only if the stator current is always synchronized with the its Back-E.M.F. The use of incremantal encoder with high resolution makes it possible to design a Self-Control led P.W.M. inverter. The pulse ratios are controlled to reduce the torque ripple in the low-speed drive region. And during the operation, torque - speed characteristics are improved by the control of optimal load angle.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.700-705
• /
• 2001

The paper presents a seam tracking controller of high speed rotating arc sensor developed by microprocessor based system. The seam tracking algorithm is based on the average current value at each interval region of four phase points on one rotating cycle. To remove the noise effect for the measured current, the area during one rotating cycle is separated into four regions of front, rear, left and right. The average values at each region are calculated, using the regional current values and a low pass filter incorporating the moving average and exponential smoothing methods is adopted.

• Journal of Internet Computing and Services
• /
• v.14 no.4
• /
• pp.85-90
• /
• 2013

Currently, the electric fire prediction system uses PIC(Peripheral Interface Controller) for controller microprocessor. PIC has a slower computing speed than DSP does, so its real-time computing ability is inadequate. So with the basic characteristics waveform during arc generation as the standard reference, the comparison to this reference is used to predict and alarm electric fire from arc. While such alarm can be detected and taken care of from a remote central server, that prediction error rate is high and remote control in mobile environment is not available. In this article, the arc detection of time domain and frequency domain and wavelet-based adaptation algorithm executing the adaptation algorithm in conversion domain were applied to develop an electric fire prediction system loaded with new real-time arc detection algorithm using DSP. Also, remote control was made available through iPhone environment-based app development which enabled remote monitoring for arc's electric signal and power quality, and its utility was verified.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1655-1666
• /
• 2015

This paper proposes a new approach of Field Programmable Gate Array (FPGA) controlled digital implementation of shunt active power filter (SAPF) under steady state and dynamic operations. Typical implementations of SAPF uses microprocessor and digital signal processor (DSP) but it limited for complex algorithm structure, absence of feedback loop delays and their cost can be exceed the benefit they bring. In this paper, the hardware resources of an FPGA are configured and implemented in order to overcome conventional microcontroller or digital signal processor implementations. This proposed FPGA digital implementation scheme has very less execution time and boosts the overall performance of the system. The FPGA controller integrates the entire control algorithm of an SAPF, including synchronous reference frame transformation, phase locked loop, low pass filter and inverter current controller etc. All these required algorithms are implemented with a single all-on chip FPGA module which provides freedom to reconfigure for any other applications. The entire algorithm is coded, processed and simulated using Xilinx 12.1 ISE suite to estimate the advantages of the proposed system. The coded algorithm is also defused on a single all-on-chip Xilinx Spartan 3A DSP-XC3SD1800 laboratory prototype and experimental results thus obtained match with simulated counterparts under the dynamic state and steady state operating conditions.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2357-2360
• /
• 2002

For the satisfying performance of a oil lubricator, design of a oil controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, oil system are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable oil readings for good fusion oil lubricator performance. In case of oil lubricator, data loss, ssr trigger error faults, they are detected by examining the data system output values and the major values of the system, and then the faults are recognized by the analysis of symptoms of faults. If necessary electronic-sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data. In this paper, a fast-32bit cpu microprocessor applied to the control of flexible link system with the sensor fault problems in the error modulo for exact positioning to show the applicability. It is shown that the fusion oil lubricator can provide a satisfactory loop performance even when the sensor faults occure.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.4
• /
• pp.24-33
• /
• 1996

PLCs are vital components of modern automation systems, which have penetrated into almost every industry. Many industries have a demand for facilitation of PLC programming. In this study, a programning system for sequential control is developed on a personal computer. This programming system consists of two main parts, a GRAFCET editor and a GRAFCET compiler. The GRAFCET editor enables us to model an actual sequential process by a GRAFCET diagram. This GRAFCET editor is developed by the menu-driven method based on specific menus and graphic symbols. The GRAFCET compiler consists of two parts, a GRAFCET parser and a code generator. The possible errors in a drawn GRAFCET diagram are first checked by the GRAFCET parser which generates finally an intermediate code from a verified CRAFCET diagram. Then the intermediate code is converted into a control code of an actual sequential controller by the code generator. To show the usefulness of this programming system, this system is applied to a pneumatically controlled handling robot. For this robot, a Z-80 microprocessor is used as the actual sequential controller.

• Journal of the Korean Society for Precision Engineering
• /
• v.2 no.1
• /
• pp.72-81
• /
• 1985

This paper deals with the Z-8000 microprocessor based optimal controller problem of large rotating system. Control algorithm consists of Global Mode and Fine Mode. In Global Mode, motor is driven with maximum torque, while, in Fine Mode, the speed of response and overshoot improved by multi-gains. Friction term of the plant was measured in the 1-st test, jerking effect by the nonlinearity of friction was compensated in the 2-nd test and the 3-rd test was carried out to finalize the control system model. Test results show that the speed of response and overshoot are highly improved.