• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.134-137
• /
• 1989

A digital controller for a discrete-data control system can take many forms. For example, they can be passive RC networks, general purpose digital computers, special purpose of mini-computer, and delay lines. With the recent advent of the microprocessor, its use as a digital controller is evident. This work discusses the hardware and software development of a microprocessor-based digital controller for a discrete-data control system. A second-order, Type 1 system is implemented on an analog computer; a Intel 80-286 microprocessor is used to implemented the controller; and, output response are obtained for step, ramp, and parabolic inputs. The results demonstrate that the microprocessor has potential as a digital controller. Finally, a brief discussion on the results indicate possible areas of improvement of the controller and future investigation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.738-742
• /
• 1996

This paper presents the automatic monitoring system for the small and medium sized manufacturing system. The monitoring system was composed of main controller, network card and monitoring sub controller for the unit machine. PC was used for the main controller and monitoring controller, which has the same hardware with the network card, was developed using Intel 80196 microprocessor.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.886-889
• /
• 2003

In this paper a design of educational robot based on a PC and/or a microprocessor is discussed. The educational robot has 5 DOF and Is made with Swiss Mini Servomotor and Motor Controller IC LM629N. Also, a GUI(Graphical User Interface) is programmed by Visual Basic. This system is completed to consider control properties of the educational robot with 5-DOF that can be changed the parameter of controller by software.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.25-28
• /
• 1989

This paper is to study a modified hysteresis band current control technique for keeping the fixed switching frequency. The control technique is applied to an brushless DC motor(BLDCM). This paper gives an analysis of the modified hysteresis band with isolated neutral case and the PI controller with current limiter in forward loop; their characteristics are studied by simulation. The proposed control technique is implemented by using a microprocessor-based system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.4
• /
• pp.517-524
• /
• 1998

This paper discusses the development of a reactive power controller using digital signal processing. Digital Signal Processing is the technique of using digital devices to Process continuous signals or data, often in real-time. And DSP algorithms are associated with a discrete time interval between input samples. When one designs a digital filter, one can use a Laplace transform to determine the continuous time frequency response. The corresponding discrete time transform is called Z transform and depends upon discrete samples of the input spaced equally in time. The objectives of this paper are to minimize real power losses and improve the power factor of a given system. Also, the implementation of a direct-form non recursive filter on the TMS320C31 has been described. The application of this microprocessor-based controller using DSP on test system reveals its numerous advantages. Performance and features of the controller for the reactive power control are analyzed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.6
• /
• pp.455-462
• /
• 2004

This paper is concerned with the implementation of the active vibration suppression controller using analog circuit and microprocessor. The target active vibration controller is the positive position feedback(PPF) controller since it provides a simple algorithm suitable for both analog circuit and digital controllers. In this study, the analog PPF controller is realized using an operational amplifier and the digital PPF controller is realized using a low-cost micro-controller. The circuit diagrams are explained in detail. We then discuss the advantages and disadvantages of both methods from the view of practical implementation. Experimental results show that both implementation methods can be effectively used for the active vibration control but need to be chosen based on the mission objective.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.916-921
• /
• 2004

This paper describes microprocessor-based control of photovoltaic power conditioning system. where the microprocessor is responsible for control of output power in accordance with the generated array DC power. The microprocessor includes the control algorithm of maximum power point tracking and converter control algorithm. In this power, we have designed a MPPT(Maximum Power Point Tracker) algorithm with environment factors and a PWM(Pulse Width Modulation) algorithm for high efficiency. The controller has been tested in the laboratory with the power conditioner and shows excellent performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1016-1021
• /
• 2003

The overall size of electronic product is becoming small according to development of technology. Accordingly it is difficult to inspect these small components by human eyes. So, an automation system for inspecting them has been used. The existing system put microprocessor or Programmable Logic Controller (PLC) use. The structure of microprocessor-based controller and PLC use basically composed of memory devices such as ROM, RAM and I/O ports. Accordingly, the system is not only becomes complicated and enlarged but also higher price. In this paper, we implement FPGA-based One-chip Programmable Timing Controller for Inspecting Small components to resolve above problems and design the high performance controller by using VHDL. With fast development, the FPGA of high capacity that can have memory and PLL have been introduced. By using the high-capacity FPGA, the peripherals of the existent controller, such as memory, I/O ports can be implemented in one FPGA. By doing this, because the complicated system can be simplified, the noise and power dissipation problems can be minimized and it can have the advantage in price. Since the proposed controller is organized to have internal register, counter, and software routines for generating timing signals, users do not have to problem the details about timing signals and need to only send some values about an inspection system through an RS232C port. By selecting theses values appropriate for a given inspection system, desired timing signals can be generated.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.122-126
• /
• 1990

This paper discusses the possibility of applying fuzzy logic controller in a microprocessor-based brushless DC servo motor controller, which requires faster and more accurate response compared with other industrial processes. Limitations of fuzzy logic controller are also described.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.431-436
• /
• 1987

In this paper, the development of an One Loop Controller is described. The functions which are built in the One Loop Controller are summarized and the hardware implemention of these functions using 16 bit microprocessor is described. The developed One Loop Controller is applied to DC_Motor based position control system and it's results are given.