• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.847-853
• /
• 2008

Although combustion is essential in most energy generation processes, it is one of the major causes of air pollution. Circle fin exhaust pipes were designed to study the effect of cooling the recirculated exhaust gases (EGR) of Diesel engines on the chemical composition of the exhaust gases and the reduction in the percentages of pollutant emissions. The designs adopted in this study were exhaust pipes with solid and hollow fins around them direct surface force measurement in water using a nano size colloidal probe Technique The direct force measurement between colloidal surfaces has been an essential topic in both theories and applications of surface chemistry. As particle size is decreased from micron size down to true Carbon nano Colloid size (<10nm), surface forces are increasingly important. Nanoparticles at close proximity or high solids loading are expected to show a different behavior than what can be estimated from continuum and mean field theories. This paper use Water and CNC fluid at normal cooling system of EGR. Experimental result showed all good agreement at Re=$2.54{\times}10^{4}$.

• 한국생산제조학회지
• /
• 제26권3호
• /
• pp.278-284
• /
• 2017

Generally, classifiers have been used as machines to crush raw materials and classify suitable particle sizes in all industrial fields, such as food, chemical, and mineral. However, the technique for classifying micron-sized particles between 5 and $20{\mu}m$ is inferior. In particular, numerous experiments and considerable experiences are required to predict the particle size, because the classifier particle size is determined according to the internal flow. However, it is quite difficult to set the driving conditions so that the desired particle size can be classified only by experience and experimentation. Therefore, this study proposes a method of predicting the average particle size by employing multiphase flow analysis and the Taguchi method; this method is subsequently verified.

• 한국식품과학회지
• /
• 제32권6호
• /
• pp.1291-1297
• /
• 2000

묵 형성 전분의 입도분포, 신속점도계에 의한 호화성질 및 전분 겔의 텍스쳐 특성을 비교하고 전분 겔의 텍스쳐 특성과의 상관관계를 조사하였다. 전분의 입도분포에서 녹두 전분 입자는 17.04 미크론 입자를 정점으로 하나의 피크를 보였으나, 도토리와 메밀 전분입자는 세 개의 피크를 보였다. 신속점도계에 의한 호화성질을 보면 일정한 농도에서 녹두 전분은 다른 전분보다 최고점도가 크며, 최저점도와 최종점도가 작고 breakdown과 setback이 컸다. 도토리 전분은 최고점도와 breakdown이 가장 작았다. 메밀 전분은 최고점도가 녹두 전분과 비슷하였으나 최저점도와 최종점도는 도토리 전분과 비슷하였다. 일정한 최고점도에서의 호화성질을 보면 녹두 전분은 최저점도와 최종점도가 가장 낮았고, breakdown과 setback은 가장 컸다. 도토리와 메밀 전분은 최저점도와 breakdown이 비슷하였으나, setback은 도토리 전분이 컸다. 전분 겔(농도 10.7%)의 텍스쳐 특성 값을 보면 녹두 전분은 탄성을 제외한 모든 특성에서 다른 전분과 유의적으로 달랐으며 응집성은 가장 작았고, 경고, 검성과 부서짐성은 가장 컸다. 도토리와 메밀 전분은 경도와 검성에서 유의적으로 달랐으며 전자가 경도와 검성이 모두 컸다. 전분 겔의 경도는 최저점도 및 최종점도와 음의 상관을, setback과는 정의 상관을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권4호
• /
• pp.613-618
• /
• 2007

Pollens are known to be an allergen. They penetrate human respiratory system, triggering a type of seasonal allergic rhinitis called pollen allergy (hey fever). The purpose of this study is to test two field-flow fractionation (FFF) techniques, gravitational FFF (GrFFF) and sedimentation FFF (SdFFF), for their applicability to sizecharacterization of micron-sized pollens. Both GrFFF and SdFFF are elution techniques, providing sequential elution of particles based on size. They allow the size distribution as well as the mean size of the sample to be determined from the elution time. In this study, GrFFF and SdFFF were used to determine the size distribution of Paper Mulberry and Bermuda Grass pollens. For the Paper Mulberry pollen, the mean size obtained by GrFFF is 12.7 μm, and agrees rather well with the OM data with the relative error of 8.0%. For the Bermuda Grass pollen, the mean size obtained by GrFFF is 32.6 μm with the relative error of 12.3%. The mean sizes determined by SdFFF are 12.4 (relative error = 10.1%) and 27.1 μm (relative error = 5.2%) for the Paper Mulberry and the Bermuda Grass pollen, respectively. Although SdFFF tends to yield more accurate size distribution due to lower band broadening under the field strength higher than 1 G, the sizes determined by GrFFF were not significantly different from those by SdFFF.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.200-200
• /
• 2003

Polycrystalline Si(polysilicon) TFTs have opened a way for the next generation of display devices, due to their higher mobility of charge carriers relative to a-Si TFTs. The polysilicon W applications extend from the current Liquid Crystal Displays to the next generation Organic Light Emitting Diodes (OLED) displays. In particular, the OLED devices require a stricter control of properties of gate oxide layer, polysilicon layer, and their interface. The polysilicon layer is generally obtained by annealing thin film a-Si layer using techniques such as solid phase crystallization and excimer laser annealing. Typically laser-crystallized Si films have grain sizes of less than 1 micron, and their electrical/dielectric properties are strongly affected by the presence of grain boundaries. Impedance spectroscopy allows the frequency-dependent measurement of impedance and can be applied to inteface-controlled materials, resolving the respective contributions of grain boundaries, interfaces, and/or surface. Impedance spectroscopy was applied to laser-annealed Si thin films, using the electrodes which are designed specially for thin films. In order to understand the effect of grain size on physical properties, the amorphous Si was exposed to different laser energy densities, thereby varying the grain size of the resulting films. The microstructural characterization was carried out to accompany the electrical/dielectric properties obtained using the impedance spectroscopy, The correlation will be made between Si grain size and the corresponding electrical/dielectric properties. The ramifications will be discussed in conjunction with active-matrix thin film transistors for Active Matrix OLED.

• 한국결정학회지
• /
• 제12권4호
• /
• pp.233-238
• /
• 2001

1㎛ 이하로 집속된 방사광원으로부터의 x-선을 이용하여 새로운 분석법인 x-선 미세회절(x-ray microdiffraction)을 사용하면 다결정시료 내 grain들의 방위나 strain의 국지적 분포를 정밀하게 측정할 수 있다. 포항가속기연구소 방사광원의 x-ray microbeam 실험 장치를 사용하여 찍은 Laue 사진을 측별히 쓰여진 분석 software를 이용하여 분석함으로써 고집적회로에 쓰이는것과 같은 방법으로 제작된 Si wafer 상의 다른 선폭의 구리 도선들이 가지는 texture 를 밝혀내었다. 실험시 x-ray빔의 크기는 2×3㎛²정도이었으며, 분석 결과에의하면 선폭 1㎛도선에서는 grain들이 방위가 특정한 방향성이 없는 반면, 선폭 20㎛도선의 중앙부분에서는 〈111〉fiber texture 가 관측되었다. Grain들의 크기는 선폭 1㎛의도선에서 2∼5㎛, 선폭 20㎛의도선에서는 6∼8㎛로 측정되었다.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.124-131
• /
• 1999

Copper film, which is expected to be used as interconnection material for 1 giga DRAM integrated circuits was deposited on hole and trench patterns by Metal Organic Chemical Vapor Deposition(MOCVD) method. After a reflow process, contact and L/S patterns were filled by copper and the characteristics of the Cu reflow process were investigated. When deposited Cu films were reflowed, grain growth and agglomeration of Cu have occurred in surfaces and inner parts of patterns as well as complete filling in patterns. Also Cu thin oxide layers were formed on the surface of Cu films reflowed in $O_2$ambient. Agglomeration and oxidation of Cu had bad influence on the electrical properties of Cu films especially, therefore, their removal and prevention were studied simultaneously. As a pattern size is decreased, preferential reflow takes place inside the patterns and this makes advantages in filling patterns of deep submicron size completely. With Cu reflow process, we could fill the patterns with the size of deep sub-micron and it is expected that Cu reflow process could meet the conditions of excellent interconnection for 1 giga DRAM device when it is combined with Cu MOCVD and CMP process.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.32.1-32.1
• /
• 2018

Novel soft magnetic materials can be achieved by altering material properties such as morphology, composition, crystallinity, and grain size of soft magnetic alloys. Especially, magnetic properties (i.e., saturation magnetization, coarcivity) of soft magnetics are significantly affected by grain boundaries which act as a control of magnetic domain wall movement. Thus, we herein develop a two-step electroless plating method to control morphology and grain size of FeCo films for excellent magnetic properties. Accordingly, the chemical composition to control the degree of polarization of FeCo alloys was altered by electroless deposition parameters; for example, electrolyte concentration and temperature. The grain size and crystallinity of FeCo alloys was dramatically affected by the reaction temperature because the grain growth mechanism dominantly occurs at $90^{\circ}C$ where as the neucleation only happens at $50^{\circ}C$. By simply controlling the temperature, the micron-sized FeCo grains embedded FeCo film was synthesized where the large grains allow high magnetization originated from larger magnetic domain with low corecivity and the nano-sized grains allow excellent soft magnetic properties due to the magnetic correlation length.

• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.84-88
• /
• 2009

Al이 치환된 $LiMn_2O_4$ 미세 분말을 구연산과 에틸렌 글리콜이 첨가된 분무용액으로부터 분무열분해 공정에 의해 합성하였다. 구형의 형상, 다공성의 구조 및 마이크론 크기를 가지는 전구체 분말들은 $800^{\circ}C$ 이상의 후열처리 온도에서 마이크론 크기 및 균일한 형태를 가지는 $LiMn_{11/6}Al_{1/6}O_4$ 분말들로 전환되었다. 후열처리 온도가 $700^{\circ}C$ 일 때 $LiMn_{11/6}Al_{1/6}O_4$ 분말은 94 mAh/g의 낮은 초기 방전 용량을 가졌다. 후열처리 온도가 $750^{\circ}C$에서 $1,000^{\circ}C$로 증가함에 따라 $LiMn_{11/6}Al_{1/6}O_2$ 분말의 초기 방전 용량은 103 mAh/g에서 117 mAh/g로 변화하였으며, 후열처리 온도 $750^{\circ}C$에서 최대 초기 방전용량을 가졌다. 반면에 후열처리 온도 $900^{\circ}C$에서 얻어진 $LiMn_{11/6}Al_{1/6}O_2$ 분말들이 좋은 사이클 특성을 가졌다. 전류밀도 0.1 C에서 70 사이클 충방전 후에 $LiMn_{11/6}Al_{1/6}O_4$ 분말들의 방전 용량은 107 mAh/g에서 100 mAh/g으로 감소하였고 93%의 사이클 효율을 유지하였다.

• Korean Chemical Engineering Research
• /
• 제61권1호
• /
• pp.39-44
• /
• 2023

본 연구에서는 습식 분극을 통하여 Si 다결정의 입자 크기를 조절을 하였으며, 입자 크기에 따른 Si 음극활물질의 용량 및 수명 특성 변화를 관찰하였다. 진동밀로 분쇄한 Si 입자를 습식법으로 분급한 시료의 입도를 분석한 결과 Si의 불균일한 입자 분포가 균일하게 조절이 되었다. Si를 24시간 분급한 시료의 d₅₀이 0.50 ㎛로 감소하였다. 전기화학적 특성 분석 결과, 입자 크기의 감소로 인하여 전극 내의 저항을 나타내는 R_ct 값이 현저하게 줄어들었다.분급하지 않은 Si 시료는 첫 사이클에서 2,869 mAh/g의 방전용량을 나타내었고, 100 사이클 후에는 85.7 mAh/g으로 방전용량이 감소하였다. Si를 24시간 분급한 시료의 경우에 초기에는 3,394 mAh/g의 용량을 보였으며, 100사이클 후에는 1,726 mAh/g의 용량을 유지하였다. 결과적으로 Si 입자의 크기가 감소할수록 방전용량이 증가하였으며, 사이클 수명도 증가하였다.