• 전기의세계
• /
• v.28 no.6
• /
• pp.15-21
• /
• 1979

전자회로의 점검에 테스터만으로 족하였던 진공관이나 트랜지스터의 시대로부터, Oscilloscope를 필수계측기로 사용하는 Digital의 시대를 거쳐서 microcomputer의 시대로 들어선 지금에 microprocessor의 기능을 충분히 활용하는데는 개발을 위한 도구로서의 개발시스템이 절실히 요구된다. Microcomputer화의 문제는 그 hardware를 어떻게 구성하는가의 면과 그것을 hard와 soft의 양쪽의 관점에서 어떻게 효율높게 이용하는가의 두가지 면으로 생각할 수 있다. Frame에 장치된 computer라는 외관을 갖춘 형태가 아니고 화로나 장치시스템속에서 정보처리를 위한 소자로서의 microcomputer를 이용하는 경우에 알아두어야 할 점들을 살피고자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.5 no.3
• /
• pp.63-70
• /
• 1988

This paper presents the development of a microcomputer-aided design program for a SISO control system. The program has been written in GWBASIC language which is suitable for Intel 80861 CPU with 640KB memory. By utilizing this program, sampling time, the number of bits for the A/D and D/A converter, and the stability for the digital control system can be determined. To demonstrate the utility of this program, a microcomputer controlled precision temperature control system has been employed as an example.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1063-1072
• /
• 1993

Current finite element analysis programs for soil cutting process with tillage tools require mainframe computers. Several special treatments in developing a microcomputer FEM program were introduced to increase the capacity for solving large problems and reducing the total time cost. The program was evaluated by solving one 3-D example on a 489 microcomputer. The results showed a close agreement with the laboratory soil bin test.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1993.05a
• /
• pp.11-11
• /
• 1993

농업 생산시설의 환경제어장치를 one chip microcomputer를 사용하여 설계, 제작하였으며 실시간 복합 제어 기능을 수행할 수 있는 운영 프로그램을 개발하였다. 제어 장치의 microcomputer 는 6 개의 analog input 선을 포함하여 45 개의 입.출력선을 가진 8 bit microcomputer chip을 사용하였다. 농업환경인 온도, 습도, 조도는 센서를 직접 접속하여 계측 할 수 있도록 계측 module을 포함시켰다. (중략)

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.999-1003
• /
• 1992

In the paper, a hybrid control approach for the swing-up control of a rotary type inverted pendulum is treated using one-chip microcomputer. The control approach is composed by a scheduling logic control for swing up control and the linear state feedback control to achieve the disired inverted-state of the pendulum. The experimental cystem has been implemented by a 16-bit one-chip microcomputer with 3096 opu as the digital controller incorporating the above mentioned control approach.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.282-287
• /
• 1987

This paper presents the development of a microcomputer-aided design program for a digital control system. The program has been written in GWBASIC language which is suitable for Intel 8086II CPU with 640KB memory. By utilizing this program, sampling time, the number of bits A/D and D/A converter, and the stability for the digital control system carl be determined, To demonstrate the utility of this program, a microcomputer controlled precision temperature control system has been employed as an example.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.14 no.6
• /
• pp.16-25
• /
• 1977

In this paper is studied a method of interfacing microcomputer system with an ordinary cassette tape recorder The use of a parallel interface adapter has made it possible not only to construct a byte in software method but also to control noter operation of the recorder. Considerable improvement of the data handling speed is accomplished in spite of a relatively simplified network configurations.

• Journal of Biosystems Engineering
• /
• v.20 no.4
• /
• pp.383-389
• /
• 1995

This study was conducted to develop an automatic nutrient control system for trickle application of nutrient solution. Temperature, electric conductivity(EC). pH and dissolved oxygen(DO) were selected as control variables. A controller using single-chip microcomputer was constructed. An automatic control system for nutrient solution and a controller using single-chip microcomputer with control algorithm were developed. The control system was tested, and could control temperature, EC and pH within the error ranges of $pm 0.2^{circ} pm 0.2mS/cm, pm 0.1pH$, respectively.

• Journal of Biosystems Engineering
• /
• v.11 no.1
• /
• pp.8-16
• /
• 1986

This study was carried out to develop a microcomputer-based data acquisition system for engine performance test. A low-cost data acquisition system was developed utilizing an "APPLE II PLUS" microcomputer. The developed system consists of microcomputer, RPM counter included frequency-to-voltage converter, preamplifier for two load cells and 8-bit analog-to-digital converter with 16 chnnels. The system simultaneously measures engine speed by means of photointerrupter, torque and fuel consumption by means of load cells with variable sample numbers, sampling intervals and repetitions. The system collects, processes and provides data for storing on the $4{\frac{1}{4}}$ inch floppy disk as well as for writing out on the printer.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.4
• /
• pp.274-283
• /
• 1981

An inexpensive and very simple microcomputer-aided measurement system has been designed for on-line experiments, which perform simultaneously data acquisition, data recorditing, calculations with the data, and positioning of necessary sensors. Interfacting between the microcomputer and the data acquisition board which consists of A/D converter, analog multiplexer, and sample-and-holder, etc. has been done through IEEE-488 interface port and parallel user port both provided by the PET computer's main logic board. Data and control signals are transfered between devices without handshaking. By utilizing BASIC commands PEEK, POKE, SYS, USR which are offered by PET microcomputer, it is possible to link machine code subroutines into the main BASIC program. This facilitates ease of data transfer, programming, and speedy execution of the program. In addition, an X-Y scanning table has been concected to the system in order to automatically position measuring sensors along a pre-determined path of interest.