• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.1
• /
• pp.130-137
• /
• 2008

Two-photon stereolithography (TPS) is recognized as a useful process for the fabrication of three-dimensional microstructures. Recently, the need for a two-photon curable resin with high strength increases as 3-D moicrostructures of high aspect ratio or large scale of several hundreds micrometers are required for applications of nano/micro devices in IT/BT. In this work, process parameters of TPS employing the SU-8 which is a representative two-photon curable resin with high strength have been studied for the precise fabrication of 3-D microstructures with high strength. The pre-baking and post-baking processes are studied and the parameter study of the SU-8 in TPS is conducted. Through this work, very small roughness of 12 nm and the minimum aspect ratio of ${\sim}1$ which provides a precise accumulation of layers could be obtained. Using the conditions studied in this work, some 3-D examples are fabricated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.7 s.238
• /
• pp.998-1004
• /
• 2005

A nano-stereolithography (NSL) process has been developed for fabrication of 3D shell structures which can be applied to various nano/micro-fluidic devices. By the process, a complicated 3D shell structure on a scale of several microns can be fabricated using lamination of layers with a resolution of 150 nm in size, so it does not require the use of my sacrificial layer or any supporting structure. A layer was fabricated by means of solidifying liquid-state monomers using two-photon absorption (TPA) induced using a femtosecond laser processing. When the polymerization process is finished, unsolidified liquid state resins can be removed easily by dropping several droplets of ethanol fur developing the fabricated structure. Through this work, some 3D shell structures, which can be applied to various applications such as nano/micro-fluidic devices and MEMS system, were fabricated using the developed process.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1415-1418
• /
• 2008

Scaffold fabrication for regenerating functional human tissues has an important role in tissue engineering, and there has been much progress in research on scaffold fabrication. However, current methods are limited by the mechanical properties of existing biodegradable materials and the irregular structures that they produce. Recently, Solid freeform fabrication (SFF) technology was remarked by fabricating 3D free-form micro-structures. Among SFF technologies, we tried to fabricate scaffolds using micro-stereolithography which contain the highest resolution of all SFF technologies and precision deposition system which can use various biomaterials. And we developed the CAD/CAM system to automate the process of scaffold fabrication and fabricate the patient customized scaffolds. These results showed the unlimited possibilities of our SFF technologies in tissue engineering.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.294-302
• /
• 2015

PURPOSE. The purpose of this study was to verify the clinical-feasibility of additive manufacturing by comparing the accuracy of four different manufacturing methods for metal coping: the conventional lost wax technique (CLWT); subtractive methods with wax blank milling (WBM); and two additive methods, multi jet modeling (MJM), and micro-stereolithography (Micro-SLA). MATERIALS AND METHODS. Thirty study models were created using an acrylic model with the maxillary upper right canine, first premolar, and first molar teeth. Based on the scan files from a non-contact blue light scanner (Identica; Medit Co. Ltd., Seoul, Korea), thirty cores were produced using the WBM, MJM, and Micro-SLA methods, respectively, and another thirty frameworks were produced using the CLWT method. To measure the marginal and internal gap, the silicone replica method was adopted, and the silicone images obtained were evaluated using a digital microscope (KH-7700; Hirox, Tokyo, Japan) at 140X magnification. Analyses were performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (${\alpha}=.05$). RESULTS. The mean marginal gaps and internal gaps showed significant differences according to tooth type (P<.001 and P<.001, respectively) and manufacturing method (P<.037 and P<.001, respectively). Micro-SLA did not show any significant difference from CLWT regarding mean marginal gap compared to the WBM and MJM methods. CONCLUSION. The mean values of gaps resulting from the four different manufacturing methods were within a clinically allowable range, and, thus, the clinical use of additive manufacturing methods is acceptable as an alternative to the traditional lost wax-technique and subtractive manufacturing.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.8 s.197
• /
• pp.138-143
• /
• 2007

Microstereolithography technology is similar to the conventional stereolithography process and enables to fabricate a complex 3D microstructure. This is divided into scanning and projection type according to aiming at precision and fabrication speed. The scanning MSL fabricates each layer using position control of laser spot on the resin surface, whereas the projection MSL fabricates one layer with one exposure using a mask. In the projection MSL, DMD used to generate dynamic pattern consists of $1024{\times}768$ micromirrors which have $13.68{\mu}m$ per side. The fabrication range and resolution are determined by the field of view of the DMD and the magnification of the projection lens. If using the projection lens with high power, very fine microstructures can be fabricated. In this paper, the projection MSL system adapted to a large surface for array-type fabrication is presented. This system covers the meso range, which is defined as the intermediate range between micro and macro, with a resolution of a few ${\mu}m$. The fabrication of array-type microstructures has been demonstrated to verify the performance of implemented system.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.2
• /
• pp.141-146
• /
• 2002

Stereolithography is the best known as rapid prototyping system. It uses the STL format data which is generated from CAD system. In this study, One of the main function of this developed CAM system deals with shape modification which divide a shape into two parts or more. The cross section of a STL part by a z-level is composed with nested or single polygonal closed loop. In order to make RP product, closed loops must fill with triangular facets from SSET and recover sliced triangular facets which is located normal direction to the cross sectional plane. The system is development by using Visuall C++ compiler in the environment of pentium PC. Operating system is Windows NT workstaion from Micro-Soft.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.514-517
• /
• 2005

Microstereolithography(MSL) has evolved from the stereolithography technique, and is also based on a light-induced layer-stacking fabrication. Although integral MSL allows the manufacture of a complete layer by one irradiation only, there is a problem related with shape precision due to the light-intensity distribution of focused image. In this study, we developed the integral MSL apparatus using Digital Micromirror Device ($DMD^{TM})$, Texas Instruments) as dynamic pattern generator. It is composed of Xenon-Mecury lamp, optical devices, pattern generator, precision stage, controllers and the control program. Also, we have studied curing depth and width of photocurable resin according to the change of exposure energy.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.210-217
• /
• 2004

In this study, a new process, named as nano replication printing(nRP) process, is developed for printing any figure in the range of several micrometers by using voxel matrix scanning scheme. In this newly developed process, a femto-second laser is scanned on a photosensitive monomer resin in order to induce polymerization of the liquid resin according to a voxel matrix which is transformed from bitmap format file. After the polymerization, a droplet of ethanol is dropt to remove the unnecessary remaining liquid resin and then the polymerized figures with nano-scaled precision are only remaining on the glass plate. By the nRP process, any figure file of bitmap format could be reproduced as nano-scaled precision replication in the range of several micrometers. Also, nano/micro-scaled patterns for an extremely wide range of applications would become a technologically feasible reality. Some of figures with nano-scaled precision were printed in scaled replication as examples to prove the usefulness of this study.