• 폴리머
• /
• 제37권3호
• /
• pp.393-398
• /
• 2013

본 실험에선 미녹시딜을 함유한 수용성 고분자 젤로부터 solvent casting 방법으로 250과 $750{\mu}m$ 두 가지 길이의 미녹시딜이 함유된 용융형 고분자 마이크로 니들(micro-needle)을 제작하였다. 제작된 미녹시딜을 함유한 용융형 고분자 마이크로 니들은 기계적 강도가 입증된 고분자 니들과 동일한 형태 및 기계적 강도를 나타냈으며, 성공적으로 피부를 투과함을 확인하였다. 제조된 고분자 마이크로 니들의 경우 피부 적용 후 최소 30분 이상은 부착되어야 전체 니들의 50% (v/v) 이상이 피부 내로 용융되었으며, 니들 적용부위에서 서서히 약물의 방출 및 확산을 확인할 수 있었다. 또한 C57BL/6 동물 모델을 통해 미녹시딜이 함유된 250, $750{\mu}m$ 길이의 고분자 마이크로 니들이 무처리군 혹은 미녹시딜 처리군에 비해 발모에 긍정적인 영향을 나타냄을 확인할 수 있었다.

• 한국생산제조학회지
• /
• 제26권3호
• /
• pp.285-291
• /
• 2017

Micro-needles are used as transferring devices for sampling of tiny constitute substances from biological bodies. Typically, nickel is used as a coating to improve the rigidity of micro-needles. This study introduces the methodology to manufacture a WC needle with very high hardness and toughness. Micro-EDM technology was used to manufacture micro-needles with holes $130{\mu}m$ in diameter and $2300{\mu}m$ in length. A micro-needle was aligned to the micro-EDM electrode using a custom two degree-of-freedom alignment system. A three-step manufacturing technique was developed to drill a micro-hole using a WC electrode. In the first process, an electrode $105{\mu}m$ in diameter was used to make a hole. Electrodes of 90 and $105{\mu}m$ diameters were used in the second and third process, respectively. Consequently, a WC micro-needle with an inner hole of $135{\mu}m$ diameter, length of $2300{\mu}m$, and outer diameter of $300{\mu}m$ was developed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.275-280
• /
• 2001

Recently, the trends of industrial products grow more miniaturization, variety and mass production. Micro drilling which take high precision in cutting work is requested more micro hole and high speed working. Especially, Micro deep hole drilling is becoming more important in a wide spectrum of precision production industries, ranging from the production of automotive fuel injection nozzle, watch and camera parts, medical needles, and thick multi-layered Printed Circuit Boards(PCB) that are demanded for very high density electric circuitry. This paper shows the tool monitoring results of micro drill with tool dynamometer. And additionally, microscope with built-in monitor inspection show the relationship between burr in workpiece and chip form of micro drill machining.

• 한국임상수의학회지
• /
• 제35권5호
• /
• pp.229-232
• /
• 2018

A 9-year-old intact female Poodle (weighing 3.6 kg) was presented for the treatment of a partial and full thickness burn that covering 45% of body including bilateral thigh and sacrolumbar region. Autologous platelet-rich plasma (PRP) stimulates angiogenesis, promoting vascular in-growth and fibroblast proliferation. On the unrecovered right thigh of the dog, autologous PRP was injected into the lesion after application of micro-needles. For macroscopic evaluation digital, photographs were taken from wounds at days 0, 3, 5, 13, 21, and 28. On the $3^{rd}$ day after PRP application, epithelialization was accelerated. Application of autologous PRP accelerated wound-healing rate and healing time in full thickness burns as well as secondary complications originating from unrecovered wounds. The delayed lesion was completely healed on the $28^{th}$ day by autologous PRP treatment. In human, PRP was increasingly used in the treatment of a variety of soft tissue in the management of chronic non-healing wounds. This study has shown that PRP treatment can be a valuable and effective aid on intractable wound healing in the dog with burns.

• 대한의용생체공학회:의공학회지
• /
• 제33권4호
• /
• pp.202-206
• /
• 2012

In this study, we developed transdermal direct drug delivery device using micro-needle painlessly. We has fabricated micro-needle that is 130 ${\mu}m$ thickness and 250 ${\mu}m$length with 10 ${\mu}m$ spiral groove for rolling down drug. Head part of micro-needle device is composed of 20ea micro-needles, an on-off valve and a protective cap. Glass bottle for containing drug is connected to head part of micro-needle device. We examined the puncture characteristic testing using porcine skin and drug delivery testing using porcine, rat skin with Indian Ink.

• KSBB Journal
• /
• 제25권2호
• /
• pp.116-122
• /
• 2010

Fermented materials have been used for long time around the world and have been researched according to the excellent effect in the part of medical and food industry. However, when such materials are applied on skin, because of the skin barrier, the most effective ingredients are poorly absorbed. The absorption of the skin is exceedingly limited and the method of increasing skin absorption needs special procedures. The micro-needle therapy is a method used to improve the absorption of drug (solution) in the skin which is called "natural skin rejuvenation therapy". This therapy uses micro-needle which is equipped with very thin, delicate needles smaller than a 0.07 mm thick hair. During this therapy, the micro-needle makes small holes and helps absorb the solution into the skin. This is a very excellent therapy in skin absorption. It can be used in wide regions of the skin without any side effects and no recovery time. In 2007, the micro-needle is permitted to personal care. However, the solutions have not yet been developed professionally, and such skill is needed.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.48-52
• /
• 2019

As the consumer market in the mold, automation and aerospace industries grows, the demand for chemical machining using on electrochemical polishing increases. To enhance the surface roughness and gloss of the micro-needle, we have studied for an electrochemical polishing. Electrochemical polishing requires the chemical reaction of solution and material according to the electrolyte and electrode. In this study, sulfuric acid(30%), phosphoric acid(50%), and DI-water(20%)were used as the electrolytic solution, and the electrolytic solution temperature used $58^{\circ}C$. Electrochemical polishing was carried out in experimental conditions, and the micro-needle experiment was carried out from the basic experiment to obtain the experimental conditions. Experimental results show that as the voltage and current increase, the surface roughness improved and the gloss is improved. So, the best result for this experiment was obtained in condition 6, which improved micro-needle.

• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.103-108
• /
• 2020

RBC (red blood cell) deformability is one of factors inducing blood shear thinning effect. Reduction of RBC deformability increases blood viscosity in high shear region. In this study, 3D printed chip with proper distribution of wall shear rate (WSR) was proposed to measure RBC deformability of blood samples. To fabricate 3D printed chip, the design of 3D printed chip determined through numerical simulation was modified based on the resolution of the 3D printer. For the estimation of pressure drop in the 3D printed chip, two bypass outlets with low and high WSR are exposed to atmospheric pressure through the needles. By positioning the outlet of needles in the gravity direction, the formation of droplets at bypass outlets can be captured by smartphone. Through image processing and fast Fourier transform (FFT) analysis, the frequency of droplet formation was analyzed. Since the frequency of droplet formation is related with the pressure at bypass, high pressure drop caused by reduction of RBC deformability can be estimated by monitoring the formation of blood droplets using the smartphone.

• Korean Chemical Engineering Research
• /
• 제62권2호
• /
• pp.181-190
• /
• 2024

본 연구는 자성 야누스 미세 흡착제를 합성하기 위해 쉽고 빠르며 대량생산이 가능한 원심력 기반 미세유체 반응기를 개발하였다. 두 개의 정렬된 주사침과 원심분리 튜브로 구성된 다중 미세노즐을 사용함으로써 높은 균일도를 갖는 프러시안 블루와 자성 나노입자의 함입이 이루어진 미세 흡착제(PB-MNP-MAs)를 합성하였다. 등온흡착과 흡착속도 실험을 통해 다공성 구조 및 프러시안 블루 나노입자의 넓은 비표면적을 갖는 미세 흡착제의 향상된 세슘 흡착 성능을 증명하였으며 이를 통해 10분 이내의 빠른 흡착을 유도할 수 있다. 흡착 공정 후, 외부 자기장 도입을 통해 세슘 수용액 내에서 합성된 PB-MNP-MAs를 성공적으로 회수하였다. 따라서 본 연구결과를 바탕으로 생물 및 환경 제염 분야에서 기능성 흡착제 발전을 위한 새로운 방향성을 제공해 줄 것으로 기대한다.

• Asian Journal of Atmospheric Environment
• /
• 제7권2호
• /
• pp.95-104
• /
• 2013

The study of carbonaceous aerosols in the atmosphere is critical to understand the role of aerosols in human health and climate. Using standardized thermal optical transmittance methods, organic carbon (OC), elemental carbon (EC), and water soluble organic carbon (WSOC) were determined using a combustion sampling system for four types of agricultural crop residues (rice straw, red pepper stems, soybean stems, and green perilla stems) and eight types of forest trees (pine stems, pine needles, ginkgo stems, ginkgo leaves, maple stems, maple leaves, cherry stems, and cherry leaves). The aerosol particles between 0.056 and $5.6{\mu}m$ in size were analyzed using a Micro-Orifice Uniform Deposit Impactor (MOUDI). In the current study, the Carbonaceous Thermal Distribution (CTD) by carbon analyzer was discussed in order to understand the carbon fractions from the twelve types of biomass burning. Also, the concentration of OC, EC, WSOC, and water insoluble organic carbon (WIOC) detected in the emissions were described.