• 대한기계학회논문집B
• /
• 제29권12호
• /
• pp.1369-1376
• /
• 2005

Effective mixing gives strong advantageous impact on microfluidic applications since mixing is in general very slow process motivated by molecular diffusion transport only on the micro-scale. In this work, the mixing characteristics are analyzed in a Y-channel micromixer with obstacles. For the through analysis, our laboratory in-house unstructured grid CFD code is validated through solving a concentration transport in a uniform microchannel. The solutions well correspond to both exact solutions and those from MemCFD. Mixing in a Y-channel micromixer with obstacles is numerically investigated by the in-house code to search the optimal radius and layout of obstacles. From the simulations, the mixing efficiency appears to be proportional to the magnitude of the formation of lateral velocity component. It is also shown that the asymmetric layout and radius enlargement of obstacles greatly improves mixing efficiency.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.511-515
• /
• 2012

At the moment, with an interest in renewable energy sources (RES) that continue to grow its penetration will be expected to considerably increase in the future power system. However, this penetration of RES leads to new challenges to be solved in electric power systems. In this paper, optimal configuration of renewable energy resources and operation strategy is presented. By using this methodology for allocation of the optimal sizes and types, system operational efficiency and stability of the microgrid will be maximized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.161-163
• /
• 2008

The paper deals with a inverter control scheme to apply feeder flow control in the hybrid system consisted of a photovoltaic system and a fuel-cell system. The inverter operation modes and a feeder control reference is changed by changing of the loads. Simulation results using the PSCAD/EMTDC are presented to establish a inverter control method for a Feeder flow control mode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.491-492
• /
• 2015

계통 미연계 도서지역에 경제적으로 분산전원을 구축하기 위해서는 총 발전량 대비 적정 신재생에너지 발전 비율을 산정해야한다. 도서지역은 소규모 전력계통으로 이루어져 있어, 신재생에너지 출력의 간헐성은 계통에 미치는 영향이 크기 때문에 ESS(신재생에너지 설비용량 ${\times}$ 4h)를 설치하도록 의무화 하고 있다. ESS의 높은 설치단가는 경제성을 하락시키는 요인으로 작용하기 때문에, 적정용량의 신재생에너지 설비를 구축하는 것이 ESS로 인한 경제성 하락을 최소화 할 수 있다. 본 논문은 도서지역의 총 발전량의 30% 이상을 신재생발전으로 공급한다는 조건에서, 경제성을 고려한 신재생에너지 발전 방안을 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.539-540
• /
• 2015

지구환경 파괴의 주범인 온실가스 감축을 위해 기후변화 협약을 통한 각종 규제와 탄소세가 등장하였다. 이러한 탄소세는 국가입장에서 큰 부담이 되기 때문에 탄소세를 줄이기 위한 대안 중 하나로 신재생에너지가 장려되고 있다.이러한 신재생에너지가 핵심인 Microgrid는 설비비가 비싸기 때문에 지원금을 지급해줘야 보급이 가능하다. 따라서 본 논문에서는 국가적 차원에서 기존의 캘리포니아 테스트 방법을 변형한 새로운 방법으로 탄소세를 고려한 적정 지원금 범위를 산정하는 방법론을 제안한다. 사례연구는 필리핀 도서지역을 대상으로 HOMER 프로그램을 사용하여 수행한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.537-538
• /
• 2015

전기혜택을 받지 못하는 개발도상국의 도서지역이나 산간지역 등에 전기를 공급하기 위한 방법으로 마이크로그리드를 구축하고 있다. 그러나 24시간 전기 공급을 위해서는 많은 투자 재원이 필요하다. 따라서 본 논문에서는 첨두 부하를 삭감하여 공급지장을 감수하더라도 투자 재원을 줄여 전기 공급의 확대를 목표로 한다. 또한 HOMER 프로그램을 이용하여 첨두 부하 삭감을 고려하는 가상발전기 개념을 도입하고 발전기의 고장정지율을 고려한 감도 분석을 통하여 마이크로그리드의 각 설비별 기대 적정 규모를 구하는 방법론을 제안한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.65-69
• /
• 2005

Curretly, the development of MEMS(Micro Electronic Mechanical System) technology awakes many research's interest for the aerodynamics. This work presents the development of a compact synthetic jet actuator for flow separation control at the flat plate. The formation and evolution of fluidic actuators based on synthetic jet technology are investigated using Reynolds-Averaged Navier-Stokes equations. Also, 2-Dimensional, unsteady, incompressible Navier-Stokes equation solver with single partitioning method for Multi-Block grid to analyze and a modeled boundary condition in developed fo. the synthetic jet actuator. Both laminar and turbulent jets are investigated. Results show very good agreement with experimental measurements. A jet flow develops, even though no net mass flow is introduced. Pair of counter-rotating vortices are observed near the jet exit as are observed in the experiments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.873-878
• /
• 2000

Semiconductor packaging technology is changed rapidly according to the trends of the micro miniaturization of multimedia and information equipment. For I/O limitation and fine pitch limitation, DIP and SOP/QFP are replaced by BGA/CSP. This is one of the surface mount technology(SMT). Solder ball is bumped n the die pad and connected onto mounting board. In ball bump formation, vacuum suction type ball alignment process is widely used, However this type has some problems such as ionization, static electricity and difficulty of fifo(first-input first-out) of solder balls. Seesaw type is reducing these problems and has a structural simplicity and economic efficiency. Ball cartridge velocity and ball aligned plate angle are Important variables to improve the ball alignment Process. In this paper, seesaw-type CSP solder ball loader is developed and the optimal velocity and plate angle are proposed.

• 융합신호처리학회논문지
• /
• 제8권3호
• /
• pp.199-204
• /
• 2007

This paper presents design of interleave configured dc-dc converter for high power distributed power system applications. The multi channel interleaving buck converter with small inductance has proved to be suitable for micro-grid, requiring medium output voltages, high output currents and fast transient response. Integrated magnetic components are used to reduce the size of the converter and improve efficiency. Unlike conventional methods, the distributed approach requires no centralized control, automatically accommodates varying numbers of converter cells, and is highly tolerant of subsystem failures. A general methodology for achieving distributed interleaving is proposed, along with a specific implementation approach. The design and simulation verification of switching frequency 10 kHz system is presented with interleaved clocking of the converter cells. The simulation (simulated by PSIM 6.1) results corroborate the analytical predictions and demonstrate the tremendous benefits of the distributed interleaving approach.

• Journal of Ship and Ocean Technology
• /
• 제3권1호
• /
• pp.1-11
• /
• 1999

Numerical simulation for the axisymmetric body with contractive and dilative periodic motion is carried out. The present analysis shows that a propulsive force can be obtained in highly viscous fluid by the contractive and dilative motion of axisymmetric body. An axisymmetric code is developed with unstructured grid system for the simulation of complicated motion and geometry. It is validated by comparing with the results of Stokes approximation with the problem of uniform flow past a sphere in low Reynolds number($R_n$ = 1). The validated code is applied to the simulation of contractive and dilative periodic motion of body whose results are quantitatively compared with the two dimensional case. The simulation is extended to the analysis of waving surface with projecting part for finding out the difference of hydrodynamics performance according to variation of waving surface configuration. The present study will be the basic research for the development of the propulsor of an axisymmetric micro-hydro-machine.