• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.324-327
• /
• 2005

An electrophoretic display using $TiO_2$ particles is the most promising candidate because it offers various advantages such as ink-on-paper appearance, good contrast ratio, wide viewing angle, image stability in the off-state and extremely low power consumption. The core technology of electrophoretic display is the dispersion controlling of $TiO_2$ nano particles in nonaqueous solution. To prepare an ink for electronic paper using electrophoretic properties of $TiO_2$ nano particles, cyclohexane with low dielectric constant and transparency, polyethylene for producing polymer coating layer which reduces apparent gravity of $TiO_2$, and $TiO_2$ powders were mixed together by planetary-mill. The zeta-potential value of $TiO_2$ particles in cyclohexane was measured about -40mV, but was measured over -110mV by dispersant attached to polyethylene-coated $TiO_2$ surface. Prepared electronic ink was filled in cross patterned micro-wall with $200{\mu}m$ in width and $40{\mu}m$ in height on ITO glass designed by photolithography. The response time of electronic paper evaluated by mobility of $TiO_2$ particle between micro-walls was measured 0.067sec, but the drift velocity from reflectance wave form during reverse from of electronic ink was measured 0.07cm/sec.

• 환경영향평가
• /
• 제28권5호
• /
• pp.492-506
• /
• 2019

공용화기사격장 내 중금속 오염물은 대부분 탄두원형으로 존재하거나 입자로 존재하는 금속조각편이며 이들 미세한 금속입자들은 오랜 기간 풍화되어 표면이 산화물 또는 탄산화물로 존재할 가능성이 매우 높다. 특히 사격장 토양에서 대표적 오염물질인 납은 연성이 높아 무르고 잘 늘어나므로 더 미세입자로 존재한다. 따라서 물리적 세척 실험으로 입도분석, 입경별 중금속농도, 금속물질 성분분석, 비중, 자력, 부상선별의 적용성 평가를 실시하였다. 금속파편의 경우 FESEM분석과 무게측정결과 납은 무른 특성에 따라 얇게 조각나고 편모양의 구조로 비슷한 면적의 구형 토양보다 무게가 더 적게 나가는 것을 확인하였으며 비중선별 적용성이 높은 것을 확인할 수 있었다. 이 결과를 적용하여 하이드로사이클론을 이용한 정화효율평가 결과 1회 71%, 2회 80%, 3회 91%의 누적 정화효율을 보였다. 이에 비해 자력선별은 17%의 낮은 효율을 보였고 부상선별은 입경 0.5 mm 미만으로 선별한 대상토는(-35 mesh) 39%로 비교적 높은 효율을 보였으나 입경 2 mm 미만으로 선별한 대상토의(-10 mesh) 효율은 16%에 불과하였다. 토양세척의 대상 처리입경은 2 mm ~ 0.075 mm로 입도구분을 추가로 하여 실규모 장치에 적용하여야 하며 이는 설치비용과 공정이 추가로 구성됨에 따른 관리가 필요할 것으로 분석되었다. 결과적으로 공용화기사 격장 오염의 토양정화는 탄두 원형을 유지한 탄두는 5.56 mm 이상으로 자갈입경보다 크므로 고비중을 이용한 비중선별을 실시하고, 금속파편으로 존재하는 오염물질은 얇게 조각나고 편모양의 구조로 같은 입경의 토양보다 무게가 더 적음에 따라 토양세척의 하이드로사이클론을 이용하여 분리하여 처리할 수 있음을 확인할 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.421-424
• /
• 2007

Dry sliding wear behavior of ultra-fine grained (UFG) plain low carbon dual phase steel, of which microstructure consists of hard martensite in a ductile ferrite matrix, has been investigated. The wear characteristics of the UFG dual phase steel was compared with that of a coarse grained dual phase steel under various applied load conditions. Dry sliding wear test were carried out using a pin-on-disk type tester at various loads of 1N to 100N under a constant sliding speed condition of 0.20m/s against an AISI 52100 bearing steel ball at room temperature. The sliding distance was fixed as 1000m for all wear tests. The wear rate was calculated by dividing the weight loss, measured to the accuracy of 10-5g by the specific gravity and sliding distance. The worn surfaces and wear debris were analyzed by SEM, EDS and profilometer. Micro-vickers hardness of the cross section of worn surfaces were conducted to analyze strain hardening underneath the contact surfaces. The wear mechanism of the UFG dual phase steel was investigated with emphasis on the unstable nature of the grain boundaries of the UFG microstructure.

• Journal of Astronomy and Space Sciences
• /
• 제34권3호
• /
• pp.199-205
• /
• 2017

A high resolution spectroscopic observation of the red supergiant star RM_1-390 in the Large Magellanic Cloud was made from a 3.6 m telescope at the European Southern Observatory. Spectral resolving power was R=20,000, with a signal-to-noise ratio S/N > 100. We found the atmospheric parameters of RM_1-390 to be as follows: the effective temperature $T_{eff}=4,250{\pm}50K$, the surface gravity ${\log}\;g=0.16{\pm}0.1$, the microturbulent velocity $v_{micro}=2.5km/s$, the macroturbulence velocity $v_{macro}=9km/s$ and the iron abundance $[Fe/H]=-0.73{\pm}0.11$. The abundances of 18 chemical elements from silicon to thorium in the atmosphere of RM_1-390 were found using the spectrum synthesis method. The relative deficiencies of all elements are close to that of iron. The fit of abundance pattern by the solar system distribution of r- and s-element isotopes shows the importance of the s-process. The plot of relative abundances as a function of second ionization potentials of corresponding chemical elements allows us to find a possibility of convective energy transport in the photosphere of RM_1-390.

• 한국세라믹학회지
• /
• 제19권4호
• /
• pp.275-280
• /
• 1982

This study was carried out to research the change of mineral phases and the characteristics (apparent specific gravity, water absorption, firing shrinkage and thermal expansion etc) of the sintered bodies composed of larnite, wollastonite and anorthite etc. in $CaO-Al_2O_3-SiO_2$ system. Test bodies were composed of the same theoretical composition as it of anorthite and fired up to $1450^{\circ}C$. Investigated the change and micro-structure of the mineral phases by XRD and SEM, the characteristics of the sintered bodies by DTA/TGA and etc. The results were as follows. 1. The sintering temperature had a higher about $60^{\circ}C$ than that of $CaO-SiO_2$ system because of coexisting $Al_2O_3$. 2. The formation and transition temperature of $\beta$-wol lastonite and $\alpha$-wollastonite were similar to the results of $CaO-SiO_2$ system. 3. The formed larnite and wollastonite were decomposed and melted at about $1260^{\circ}C$. 4. Anorthite began to be synthesized at $1140^{\circ}C$, its quantity was repidly increased according to the temperature rising.

• 한국결정성장학회지
• /
• 제14권5호
• /
• pp.226-232
• /
• 2004

One predicts the crystal growth rate of ZnSe with a low vapor pressure system in a horizontal configuration based on one dimensional advection-diffusion and two-dimensional diffusion-convection model. The present results show that for the ratios of partial pressures, s = 0.2 and 2.9, the growth rate increases with the temperature differences between the source and crystal. As the ratio of partial pressure approaches the stoichiometric value, s = 2 from s = 1.5 (zinc-deficient case: s < 2) and 2.9 (zinc-rich case: s > 2), the rate increases sharply. For the ranges from 1.5 to 1.999 (zinc-deficient case: s < 2) and from s = 9 to 2.9 (zinc-rich case: s > 2), the rate are slightly varied. From the viewpoint of the order of magnitude, the one-dimensional model for low vapor pressure system falls within the 2D predictions, which indicates the flow fields would be advective-diffusive. For the effects of gravitational accelerations on the rate, the gravitational constants are varied from 1 g to $10^{-6}$ g for $\Delta$T = 50 K and s = 1.5, the rates remain nearly constant, i.e., 211 mg/hr, which indicates Stefan flow is dominant over convection.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.673-677
• /
• 2009

현재 상수시설의 경우 갈수록 악화되는 수질과 정수장의 유지관리 인원 상주의 어려움, 기존의 응집, 침전, 여과 정수처리 시스템의 처리성능 증대에 따른 한계성에 직면한 상황이다. 안정적으로 수질의 개선을 통한 장치의 컴팩트화, 유지관리가 편리한 고도정수 수질기준에 만족하는 정수처리 시스템이 필요하다. 본 연구에서는 기존의 정수처리 시설인 혼화지에 응집제와 함께 다양한 비중을 가지고 있는 모래입자를 투입하여 응집제와 모래의 결합에 따른 탁도 제거효율과 슬러지의 양을 비교하였으며, 침전지내에 정류벽을 설치하여 침전지 초반에 가라앉을 수 있도록 유도하여 탁도 및 슬러지양을 비교하였다. 응집제만 투입한 경우보다 시료를 투입한 경우가 탁도제거율과 슬러지양이 상승하는 것을 볼 수 있으며 그중에서도 규사의 경우가 가장 많은 탁도제거율의 상승을 나타냈다. 또한 이중 정류벽을 설치하여 탁도 및 슬러지양을 측정한 결과 이중정류벽을 설치하지 않은 경우보다 탁도제거율 및 슬러지양 또한 높게 측정되었으며 슬러지의 양 또한 침전지 앞부분에 집중되는 것으로 나타났다. 이러한 경우 상기 플럭의 질량이 증가하기 때문에 처리속도를 높이고, 체류시간을 줄이고, 처리를 효율적으로 안정되게 수행하는 것이 가능하다. 본 연구결과를 바탕으로 정수시설의 설치에 있어 시료와 이중정류벽을 함께 사용할 경우 응집제의 절감 또는 침전지의 컴팩트화를 가져올 것으로 예상된다.

• 한국항공우주학회지
• /
• 제36권4호
• /
• pp.393-398
• /
• 2008

본 논문에서는 소형 인공위성에 탑재 가능한 GPS/INS 항법 컴퓨터의 구조를 제안한다. GPS/INS 항법 시스템을 소형 인공위성에 적용하기 위해서는 우선 우주의 방사능, 미세 중력, 진공 상태 등의 극한 환경을 고려해야 한다. 또한 소형 인공위성에서 GPS/INS 항법 시스템의 궁극적인 목표는 소형 인공위성의 편대 비행이므로 실시간 처리 능력이 필요하다. 제작된 항법 보드에는 우주환경에 대한 헤리티지가 있는 PowerPC계열의 MPC860T와 KAUSAT-2의 환경시험에서 우주환경에 대한 검증을 마친 ATmega128을 사용하였다. 항법 알고리즘은 MPC860T에 포팅된 VxWorks 환경에서 동작하도록 구현하였다.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.143-150
• /
• 2009

Today, wastes of much quantity by fast industrialization and increase in population, population concentration etc. of modem society are increasing. Much oyster shell is breeding by character and conduct of oyster-industry for a long time among them. Oyster shell which breed by-product in oyster cultivating industry that specific gravity of domestic seashore cultivating industry is high is causing environmental problem by problem and so on hindrance, nature spectacle's waste and health hygiene on administration if it is pollution of district along the coast fishing ground, number of public ownership being stored in open area in seashore. About new material just-in-time through recycling and he of oyster shell by these problem wide that study. Go forward more and investigate special quality that is oyster shell's physical chemistry red in this research and oyster shell oyster shell which cause several environmental problems developing ability agricultural chemicals that use this encapsulating micro by ability carrier that is environmentally application possibility examine wish to.

• 한국연소학회지
• /
• 제13권3호
• /
• pp.17-23
• /
• 2008

The spray combustion and spray cooling depends on droplet evaporation. So, evaporation model for spray has been requested and lots of investigation has been done and various reliable models have been developed also for last few decades. In the present study, One dimensional quasi-steady spherically symmetric droplet evaporation model for micro-gravity is developed. The gas phase was assumed as steady state and the thermophysical properties are calculated as a function of temperature, pressure and composition and the properties used in the model was validated by NIST web data and overall evaporation history results was compared with experimental results by Nomura and Qasim and gave satisfactory agreements. Through this model, diverse phenomenon was investigated, especially regarding the effects of ambient pressure and temperature. The effects of pressure for the droplet evaporation time were studied. The high pressure increased the droplet surface temperature and made effect on the evaporation time depend on atmospheric temperature. The role of the ambient temperature was investigated and explained. The basic investigation for the evaporation process according to variation of droplet diameter and surface temperature were also investigated and the well-known phenomena, like D-square-law, were reported, too.