• 대한수의학회지
• /
• 제36권3호
• /
• pp.647-655
• /
• 1996

To establish the effective ways to prevent bovine mastitis, the study has been performed to investigate the attributable factors causing down-regulation of immune responses in mammary gland of non-lactating cows. Lymphocytes from peripheral blood and mammary gland secretions(MGS) were obtained from normal healthy cows and mastitic cows, respectively. Lymphoblastogenesis were investigated carefully by adding different concentrations of supernatants collected from pure-cultures of neutrophils seperated from peripheral blood and MGS, respectively. The results obtained are as follows ; 1. Lymphoblastogenesis activity stimulated by Con A, PWM and PHA were significantly reduced in MGS from mastitic cows. 2. Supernatants collected from pure-culture of neutrophils separated both from peripheral blood and MGS showed inhibitory effect on mitogenic lymphoblastogenesis. 3. Supernatants from mammary gland neutrophils have shown 7 times more inhibitory activity than those from peripheral blood and this inhibitory effect was increased in proportion to increasing concentrations of supernatants when those were added to lymphoblast cells in culture.

• 한국재료학회지
• /
• 제33권2호
• /
• pp.63-70
• /
• 2023

In this study, crystallization was effectively suppressed in Al-based metallic glasses (Al-MGs) during pulverization by cryo-milling by applying an extremely low processing temperature and using a surfactant. Before Al-MGs can be used as an additive in Ag paste for solar cells, the particle sizes of the Al-MGs must be reduced by milling. However, during the ball milling process crystallization of the Al-MG is a problem. Once the Al-MG is crystallized, they no longer exhibit glass-like behavior, such as thermoplastic deformation, which is critical to decrease the electrical resistance of the Ag electrode. The main reason for crystallization during the ball milling process is the heat generated by collisions between the particles and the balls, or between the particles. Once the heat reaches the crystallization temperature of the Al-MGs, they start crystallization. Another reason for the crystallization is agglomeration of the particles. If the initially fed particles become severely agglomerated, they coalesce instead of being pulverized during the milling. The coalesced particles experience more collisions and finally crystallize. In this study, the heat generated during milling was suppressed by using cryo-milling with liquid-nitrogen, which was regularly fed into the milling jar. Also, the MG powders were dispersed using a surfactant before milling, so that the problem of agglomeration was resolved. Cryo-milling with the surfactant led to D50 = 10 um after 6 h milling, and we finally achieved a specific contact resistance of 0.22 mΩcm² and electrical resistivity of 2.81 μΩcm using the milled MG particles.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.683-686
• /
• 2005

This study addresses a photogrammetric approach to generate Mars topographic products from mapping data of Mars Global Surveyor (MGS). High-resolution stereo images and laser altimetry data collected from the MGS mission are combined and processed to produce Digital Elevation Models (DEM) and orthoimages. First, altimeter data is registered to high resolution images and considerable registration offset (around 325 m) is discovered on high resolution stereo images. Altimetry data, exterior orientation elements of the camera and conjugate points are used for bundle adjustment to solve this mis-registration and detennine the ground coordinates. The mis-registration of altimetry data are effectively eliminated after the bundle adjustment. Using the adjusted exterior orientation the ground coordinates of conjugate points are detennined. A sufficient number of corresponding points collected through image matching and their precise 3-D ground coordinates are used to generate DEM and orthoimages. A posteriori standard deviations of ground points after bundle adjustment indicate the accuracy of OEM generated in this study. This paper addresses the photogrammetric procedure: the registration of altimetry data to stereo pair images, the bundle adjustment and the evaluation, and the generation of OEM and orthoimages.

• 한국인공지능학회지
• /
• 제11권2호
• /
• pp.1-6
• /
• 2023

This paper presents a comprehensive scheme for assessing the importance of multiple microgrids (MGs) network that includes distributed energy resources (DERs), renewable energy systems (RESs), and energy storage system (ESS) facilities. Due to the uncertainty of severe weather, large-scale cascading failures are inevitable in energy networks. making the assessment of the structural vulnerability of the energy network an attractive research theme. This attention has led to the identification of the importance of measuring energy nodes. In multiple MG networks, the energy nodes are regarded as one MG. This paper presents a modified PageRank algorithm to assess the importance of MGs that include multiple DERs and ESS. With the importance rank order list of the multiple MG networks, the core MG (or node) of power production and consumption can be identified. Identifying such an MG is useful in preventing cascading failures by distributing the concentration on the core node, while increasing the effective link connection of the energy flow and energy trade. This scheme can be applied to identify the most profitable MG in the energy trade market so that the deployment operation of the MG connection can be decided to increase the effectiveness of energy usages. By identifying the important MG nodes in the network, it can help improve the resilience and robustness of the power grid system against large-scale cascading failures and other unexpected events. The proposed algorithm can point out which MG node is important in the MGs power grid network and thus, it could prevent the cascading failure by distributing the important MG node's role to other MG nodes.

• Journal of Power Electronics
• /
• 제9권6호
• /
• pp.919-928
• /
• 2009

Microgrids (MGs) are typically comprised of distributed generators (DGs) including renewable energy sources (RESs), storage devices and controllable loads, which can operate in either interconnected or isolated mode from the main distribution grid. This paper introduces a novel dynamic programming (DP) approach to MG optimization which takes into consideration the coordination of energy supply in terms of heat and electricity. The DP method has been applied successfully to several cases in power system operations. In this paper, a special emphasis is placed on the uncontrollability of RESs, the constraints of DGs, and the application of demand response (DR) programs such as directed load control (DLC), interruptible/curtaillable (I/C) service, and/or demand-side bidding (DSB) in the deregulated market. Finally, in order to illustrate the optimization results, this approach is applied to a couple of examples of MGs in a certain configuration. The results also show the maximum profit that can be achieved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권12호
• /
• pp.3200-3219
• /
• 2013

This paper proposes an adaptive combined scalable video coding (CSVC) system for video transmission over MIMO-OFDM (Multiple-Input Multiple-Output-Orthogonal Frequency Division Multiplexing) broadband wireless communication systems. The scalable combination method of CSVC adaptively combines the medium grain scalable (MGS), the coarse grain scalable (CGS) and the scalable spatial modes with the limited feedback partially from channel state information (CSI) of MIMO-OFDM systems. The objective is to improve the average of peak signal-to-noise ratio (PSNR) and bit error rate (BER) of the received video stream by exploiting partial CSI of video sources and channel condition. Experimental results show that the delivered quality using the proposed adaptive CSVC over MIMO-OFDM system performs better than those proposed previously in the literature.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 춘계학술발표대회
• /
• pp.461-463
• /
• 2016

Information security and preservation of customer's data privacy are key factors for further wide spread adoption of microgrid (MG) technology. However, strong coupling between the operation cost of multi-microgrid (MMG) system and privacy of customer data makes it more challenging. A nested energy management system (EMS) has been proposed in this paper. The surplus/shortage information from the inner level MGs is included in processing the optimal operation of outer level MGs. This type of optimization ensures a layered privacy-preservation to customer at each MG level. The proposed EMS architecture is a better trade-off architecture between the operation cost of the MMG system and customer privacy-preservation at each level of MG.

• 대한임베디드공학회논문지
• /
• 제4권1호
• /
• pp.35-41
• /
• 2009

The H.264/SVC enables network-adaptive video transmission to smart device which uses wireless network. But, quality scalability of H.264/SVC does not consider personal subjective image quality. In addition, its network efficiency also does not optimized because it uses MGS(Medium Grained Scalability) and CGS(Coarse Grained Scalability). Thus, this paper proposed a new scalable ROI algorithm for not only subjective image quality improvement but also network adaptation. To experiment our proposed a scheme, we added designed algorithm to JSVM(Joint Scalable Video Model) open source video codec of H.264/SVC. Experiment was performed according to the pre-defined scenario for simulating various network conditions. Finally, experimental result showed our proposed scalable ROI scheme. It is better than traditional non-selective scheme in subjective video quality.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권2호
• /
• pp.94-102
• /
• 2004

The digital electronic switching system has some problems, when this system processes OAM(Operation, Administration And Maintenance) messages about the fault, the traffic, the account, and the performance, etc., at the present. One of these problems is that each the module processing these messages in the digital electronic switching system can not process OAM messages out of another digital electronic switching system. Each the module processing these OAM messages, that is, has been programmed in order to process only the OAM message out of the digital electronic switching system mounting itself, not to process the message out of the digital electronic switching system based on another platform. Therefore, we studied on methods that could process OAM messages out of all digital electronic switching systems and, first of all, developed the MGS(Message Gathering System) to be able to accept and process the fault message of OAM messages out of all digital electronic switching systems in real time.

• 전력전자학회논문지
• /
• 제24권3호
• /
• pp.191-200
• /
• 2019

This study proposes a hardware-in-the-loop simulation (HILS) system based on National Instruments' PXI platform to test power management and operation strategies for DC microgrids (MGs). The HILS system is developed based on the controller HIL prototype, which involves testing the controller board in hardware with a real-time simulation model of the plant in a real-time digital simulator. The system provides an economical and effective testing function for research on MG systems. The decentralized power management strategy based on the DC bus signaling method for DC MGs has been developed and implemented on the HILS platform. HILS results are determined to be similar to those of the off-line simulation in PSIM software.