• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.2
• /
• pp.162-167
• /
• 2017

The chevron rubber spring is used for subway vehicle as a primary suspension. Generally, the primary suspension has an influence to the running performance and not so much effect on the ride comfort in railway vehicle. But the stiffness of chevron spring is harder and harder as time goes on because of rubber characteristics. Therefore the dynamic characteristics such as ride comfort and derailment coefficient should be reviewed according to the stiffness variation of chevron rubber spring. In this paper the effect of chevron rubber spring on dynamic characteristics was studied by considering multi-body dynamics of railway vehicle on one straight line and seven curved lines.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1747-1751
• /
• 2014

Interlocking system along with point machine for efficient route control secures safety of train operation by interchanging information each other. However, various types of interlocking system and point machine operating on bender specific interface bring obstacles to effective maintenance and safety. In this paper, we have investigated on interface methods to suggest standard interface module applicable to various operating system

• Journal of the Korean Society of Safety
• /
• v.24 no.1
• /
• pp.78-88
• /
• 2009

As the silver population rapidly increased, it became more urgent to establish a scheme of the traffic safety for the old. As part of the scheme, a polity to apply 'designation of the silver zone' was legislated into law. However, the standard quoting 'the silver zone should be within 300m - radius of the relevant facility' was considered homogeneous and even limited to apply its original objective. This study was to introduce a new standard to select the silver zone reflecting the actual scale. Consequently, I hope that this study would be useful reference for further development and the approach in the research could be legislated into law for more efficient designation and operation of the silver zone.

• Journal of the Korean association of regional geographers
• /
• v.10 no.2
• /
• pp.252-266
• /
• 2004

This study analyzes the influence of the construction of a high-speed railroad on territorial organization in France. After development of a new transportation network, the French territorial organization has been largely modified. Many economic urban areas are modified by their position in the territorial hierarchy according to their condition of connection with the TGV network. At first, spatial convergence is the most important effect of the TGV network construction. Second, the development of a transportation network concentrated in the Paris area has influence as an intensified factor on metropolitan areas and as a weakening factor on middle- and small-sized cities. Thus, this system has risk in increasing territorial imbalance in France. Third, to implant an economic activity zone around new TGV stations, a new town or a new economic center starts to develop. This is going to grow into a second core outside of the old city center so that regional spatial organization is transformed from a mono-polarized(mono-centric) organization to a multi-polarized(polycentric) one. Lastly, the integration of the EU railroad system enhances the concentration of economic activity in European metropolitan areas as each metropolitan area tries to develop more competitive space for its rising position in the global urban hierarchical system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.425-433
• /
• 2016

The construction of a light rail transit (LRT) system is a large and complex infrastructure project involving hundreds of billions of won in construction costs for a single route, and it is very important to carry out such a project from a life-cycle perspective because of its long-term operation. Systems engineering is a means and methodology to successfully implement customers' needs, and it is useful in large projects such as light rail transit. An application model called Systems Engineering for Light Rail Transit (SELRT) was developed to support systems engineering activities in light rail transit projects. In order to utilize SELRT, it is necessary to ensure that system requirements are met. As such, in this paper, we present a verification procedure and architecture based on a systems engineering-based methodology, thereby identifying the system requirements and deriving the verification requirements to confirm the SELRT model for the proposed method. The results show that the traceability of the system requirements and verification requirements, the verification method for each requirement, and the demonstration results for computerized tools are mutually connected, and that the initial requirements are clearly implemented in the SELRT. The proposed method is valid for verifying the SELRT, which can also be utilized in a LRT project.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.778-784
• /
• 2017

In this paper, we propose wired and wireless distributed control systems designed to improve the freight logistics efficiency and verify wired distributed control systems. The verification condition required that 50 cargo vehicles be connected and operated to travel 21 km from Busan Sinhang station to Jinlye Station at an average speed of about 100km/h. The verification results show that the traction output and braking output of the control and controlled cars are dispersed by the wired distributed control system. The application is expected to more than double the efficiency of the logistics compared to the existing freight transportation system. However, in the case of the wired distributed control system, cable installation and maintenance are difficult, and it is impossible to change the combination of freight vehicles. Through the verification of the wired distributed control system, the applicability of distributed control systems to freight vehicles in Korea was confirmed and the system was further developed to produce a wireless distributed control system. In order to apply the wireless distributed control system, a propagation environment analysis for the ISM band was performed in the testbed and, as a result, it was confirmed that Wifi technology using the ISM band could be utilized. In order to use the WDP (Wireless Distributed Power) devices newly installed in the target vehicles, the transmission / reception control signals associated with the propulsion / braking / total control devices are defined. In the case of wireless distributed control systems, the convenience of their application and operation is guaranteed, but reliability and emergency safety measures should because of the dependence of the control of the vehicle on radio signals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6274-6281
• /
• 2015

Radio-based train control system has driving headway shortening effect by real-time train interval control using two-way radio communication between onboard and wayside systems, and reduces facility investment because it does not require any track-circuit. Automatic train protection(ATP), the most significant part of the radio-based train control system, makes sure a safe distance between preceding and following trains, based on real-time train location tracing. In this paper, we propose the overall ATP train interval control algorithm to control the safe interval between trains, and preprocessing-based speed profile calculation algorithm to improve the processing speed of the ATP. The proposed speed profile calculation algorithm calculates the permanent speed limit for track and train in advance and uses as the most restrictive speed profile. If the temporary speed limit is generated for a particular track section, it reflects the temporary speed limit to pre-calculated speed profile and improves calculation performance by updating the speed profile for the corresponding track section. To evaluate the performance of the proposed speed profile calculation algorithm, we analyze the proposed algorithm with O-notation and we can find that it is possible to improve the time complexity than the existing one. To verify the proposed ATP train interval control algorithm, we build the train interval control simulator. The experimental results show the safe train interval control is carried out in a variety of operating conditions.

• Particle and aerosol research
• /
• v.6 no.1
• /
• pp.9-20
• /
• 2010

This study examined the concentration level of the major air pollutants in public transportation. The study was conducted between February 2009 and March 2008 at Suwon-Yeosu line in Korea. $PM_{10}$ concentration level was $100{\mu}g/m^3$ on average. The $PM_{2.5}$ to PM10 ratio in transport is 0.37, which was lower than the results published by other researches. The result also demonstrated that outdoor $PM_{10}$ concentration was about 56~60% level compared to that of the cabin. $CO_2$ concentration level in the cabin was 1,359ppm, which does not exceed 2,000ppm, which is the guideline concentration level according to the Ministry of Environment. $CO_2$ concentration level in the cabin was $CO_2=23.4{\times}N+460.2$, and about 23.4ppm in $CO_2$ concentration level increased every time one passenger was added on. The experiment conducted on the train demonstrated that the average $PM_{10}$ concentration level was $100{\mu}g/m^3$ in case of the reference cabin while average $PM_{10}$ concentration level of the modified vehicle was $68{\mu}g/m^3$. Likewise, effect of the particle reduction device for the reduction of $PM_{10}$ concentration level was approximately 21%. Meanwhile there was almost no difference in the concentration level between reference and modified cabin in case of $PM_{2.5}$. Using zeolite as an adsorbent was made to reduce the $CO_2$ concentration level in the cabin. Number of passengers was factored in, to calculate the effect of the adsorption device, which demonstrated that about 36% of $CO_2$ concentration level was reduced in the modified cabin effect of the $CO_2$ reduction device. This research analyzed the current status concerning the quality of air in the public transportation and technologies were developed that reduces major air pollutants.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1352-1357
• /
• 2011

Heights of a platform above the rail for the passenger train in the country are classified into two categories such as the low level (500mm; mainline) and the high level (1,135mm; metropolitan subway line) platforms. In order to operate similarly both a mainline railroad and a metropolitan subway line, as the requisite door safety system, it is necessary to develop the doorstep equipment of the rolling stock regardless of both the low and high level platforms. In this study, the application of doorstep equipments to use mixed with two types of platforms are examined on the supposition that the train only for the low level platform stops in the both low and high level platforms.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.484-489
• /
• 2011

Heights of a platform above the rail for the passenger train in the country are classified into two categories such as the low level (500mm; mainline) and the high level (1,135mm; metropolitan subway line) platforms. In order to operate similarly both a mainline railroad and a metropolitan subway line, as the requisite door safety system, it is necessary to develop the doorstep equipment of the rolling stock regardless of both the low and high level platforms. In this study, performance requirements of doorstep equipments used for two types of platforms are examined on the supposition that the train only for the low level platform could stop in the both low and high level platforms.