• Title/Summary/Keyword: metrix

Search Result 34, Processing Time 0.023 seconds

CComparative evaluation of the methods of producing planar image results by using Q-Metrix method of SPECT/CT in Lung Perfusion Scan (Lung Perfusion scan에서 SPECT-CT의 Q-Metrix방법과 평면영상 결과 산출방법에 대한 비교평가)

  • Ha, Tae Hwan;Lim, Jung Jin;Do, Yong Ho;Cho, Sung Wook;Noh, Gyeong Woon
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.22 no.1
    • /
    • pp.90-97
    • /
    • 2018
  • Purpose The lung segment ratio which is obtained through quantitative analyses of lung perfusion scan images is calculated to evaluate the lung function pre and post surgery. In this Study, the planar image production methods by using Q-Metrix (GE Healthcare, USA) program capable of not only quantitative analysis but also computation of the segment ratio after having performed SPECT/CT are comparatively evaluated. Materials and Methods Lung perfusion scan and SPECT/CT were performed on 50 lung cancer patients prior to surgery who visited our hospital from May 1, 2015 to September 13, 2016 by using Discovery 670(GE Healthcare, USA) equipment. AP(Anterior Posterior)method that uses planar image divided the frontal and rear images into three rectangular portions by means of ROI tool while PO(Posterior Oblique)method computed the segment ratio by dividing the right lobe into three parts and the left lobe into two parts on the oblique image. Segment ratio was computed by setting the ROI and VOI in the CT image by using Q-Metrix program and statistically analysis was performed with SPSS Ver. 23. Results Regarding the correlation concordance rate of Q-Metrix and AP methods, RUL(Right upper lobe), RML(Right middle lobe) and RLL(Right lower lobe) were 0.224, 0.035 and 0.447. LUL(Left upper lobe) and LLL(Left lower lobe) were found to be 0.643 and 0.456, respectively. In the PO method, the right lobe were 0.663, 0.623 and 0.702, respectively, while the left lobe were 0.754 and 0.823. When comparison was made by using the Paired sample T-test, Right lobe were $11.6{\pm}4.5$, $26.9{\pm}6.2$ and $17.8{\pm}4.2$, respectively in the AP method. Left lobe were $28.4{\pm}4.8$ and $15.4{\pm}5.6$. The right lobe of PO had values of $17.4{\pm}5.0$, $10.5{\pm}3.6$ and $27.3{\pm}6.0$, while the left lobe had values of $21.6{\pm}4.8$ and $23.1{\pm}6.6$, thereby having statistically significant difference in comparison to the Q-Metrix method for each of the lobes (P<0.05). However, there was no statistically significant difference in Right middle lobe (P>0.05). Conclusion The AP method showed low concordance rate in correlation with the Q-Metrix method. However, PO method displayed high concordance rate overall. although AP method had significant differences in all lobes, there was no significant difference in Right middle lobe of PO method. Therefore, at the time of production of lung perfusion scan results, utilization of Q-Metrix method of SPECT/CT would be useful in computation of accurate resultant values. Moreover, it is deemed possible to expect obtain more practical sectional computation result values by using PO method at the time of planar image acquisition.

Effects of Sabaek-san on the Metrix Metalloproteinase-9 in the Bronchial Asthma Mouse Model (사백산이 천식유발 백서에서 metrix metalloproteinase-9(MMP-9)에 미치는 영향)

  • Lee Hai Ja
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.18 no.6
    • /
    • pp.1694-1698
    • /
    • 2004
  • We hope to evaluate the effects of Sabaek-san for the bronchial asthma using assesment on the metrix metalloproteinase-9(MMP-9) after Sabaek-san was intravenously administered OVA-sensitized and -challenged mice. Seventy-two female mice, 8-10 weeks of age and free of murine specific pathogens, were used. Of the seventy-two mice, twenty-four mice were not sensitized and forty-eight mice were sensitized by intraperitoneal injection of OVA. Of the sensitized mice, twenty-four mice didn't administrate Sabaek-san and twenty-four administrated Sabaek-san. Mice were sensitized on days 1 and 14 by intraperitoneal injection of 20 fig OVA. On days 21, 22 and 23 after the initial sensitization, the mice were challenged for 30 minutes with an aerosol of 1% OVA in saline. Sabaek-san administered 200㎎/㎏ in the tail of the mouse, one time per day, for 7 days, beginning 14 days after first sensitization. Bronchoalveolar lavage was performed 72 hours after the last challenge, and total cell numbers in the BAL fluid were count. Also, level of MMP-9 in the BAL fluid were measured by Enzyme immunoassays and Western blot analysis. Enzyme immunoassay revealed that MMP-9 levels in the BAL fluids significantly increased 72 h after OVA inhalation compared with levels in the control group. After administration of the Sabaek-san, the levels of the MMP-9 in BAL fluids 72 h after OVA inhalation reduced dramatically. Western blot analysis revealed that MMP-9 levels increased in the all mice which were challenge with OVA without administered Sabaek-san compared the normal mouse. However, in the groups of the administered Sabaek-san, the MMP-9 level markedly decreased. Sabaek-san might be effect the treatment of the bronchial asthma as a inhibition of the MMP-9.

Evaluation of Vacuum Brazed WC and Stainless Steel for Oil Sands Plant (오일샌드 플랜트용 초경합금과 스테인레스강의 진공브레이징 특성평가)

  • Chang, Se-Hun;Cho, Seung-Hyun;Ahn, Seong-Woo;Heo, Joong-Sik;Kim, In-Pyo;Oh, Ik-Hyun
    • The KSFM Journal of Fluid Machinery
    • /
    • v.19 no.3
    • /
    • pp.48-52
    • /
    • 2016
  • Microstructure and tensile strength of the vacuum brazed stainless steel(STS304) and WC-8 %Co were investigated. For brazing, the BNi-2, 3(A.W.S standard) were used as filler metals. It was found that metallic compounds of W-Ni were observed at the between WC metrix and brazed layer. Among these filler metals, the BNi-2 showed excellent wettability, but tensile strength was lower than BNi-3. The fracture of the brazed specimens with BNi-2 was occurred at the between WC metrix and brazed layer. The fracture of the brazed specimens with BNi-3 was occurred at the between WC metrix and brazed layer, and between brazed layer and stainless steel.

Yun Chi-ho's English Diary and English Writing Education (윤치호 영어 일기와 영어 쓰기 교육)

  • Seo, Min-Won
    • The Journal of the Korea Contents Association
    • /
    • v.14 no.8
    • /
    • pp.528-541
    • /
    • 2014
  • The purpose of this study is to analyze Yun Chi-ho's English Diary both quantitatively and qualitatively. A corpus of 574 diary texts is created from his first and last years in an English speaking environment, and analyzed by two language analysis programs, RANGE and Coh-Metrix. His later diaries have more words in total, and longer average sentence length than his earlier diaries. Also, the Coh-Metrix indices in syntactic complexity and referential cohesion are higher in his later diaries. A qualitative analysis of 57 diary texts shows some improvement in his use of language forms. The most frequent topics of his journals are Christianity, everyday life, politics of Korea and his English studies. His constant effort to keep his journal and correspondence with foreigners, almost all in English, is estimated as one of the key factors for his successful English acquisition. Educational implications for EFL writing courses are discussed.

Stress Analysis of Crank Shaft by Considering Bending and Twisting Moment (굽힘 및 비틀림모멘트를 고려한 크랭크축의 응력해석)

  • 이정윤;정주석
    • Journal of the Korean Society of Safety
    • /
    • v.8 no.3
    • /
    • pp.13-18
    • /
    • 1993
  • This paper an application method of crankshaft of four cylinder internal combustion engine for studying stress analysis of the shaft. For simple analysis, uniform sections of journal, pin and arm parts were assumed. Transfer Metrix Method was used, considering branched part and coordinate transformation part. Bending, twisting moment and stresses of crank shaft were investigated.

  • PDF

Analysis of the Continuity of Reading Passages in the 5th and 6th Grade Elementary School English Textbooks Based on Readability (이독성을 통한 초등학교 5, 6학년 영어 교과서 읽기 지문의 연계성 분석)

  • Jang, Hankyeol;Lee, Je-Young
    • The Journal of the Korea Contents Association
    • /
    • v.22 no.6
    • /
    • pp.116-124
    • /
    • 2022
  • The purpose of this study is to examine the vertical and horizontal continuity between grades and publishers, respectively, by analyzing the readability of reading passages included in English textbooks for 5th and 6th grades of elementary school. In order to do so, a corpus was constructed with the reading passages contained in 10 textbooks, and the reading passages in each textbook were analyzed through Coh-Metrix. Also, it was examined whether there was a statistically significant difference between grades and publishers in readability through one-way ANOVA. The results are as follows. First, as a result of analyzing the difference in readability between publishers within the same grade, there was a statistically significant difference between fifth-grade textbooks in the L2 readability index. Second, as a result of analyzing the vertical continuity between grades within the publisher, the difficulty of textbook A was higher in grade 6 than grade 5 based on FRE and FKGL, which showed a statistically significant difference. On the other hand, when L2 readability was used as the standard, the difficulty of textbook B was lower in 6th grade than in 5th grade. This result seems to be because FRE and FKGL calculate readability based on sentence and word length, whereas L2 readability is based on content word overlap, word frequency, and syntactic similarity of sentences.

A partial proof of the convergence of the block-ADI preconditioner

  • Ma, Sang-Back
    • Communications of the Korean Mathematical Society
    • /
    • v.11 no.2
    • /
    • pp.495-501
    • /
    • 1996
  • There is currently a regain of interest in ADI (Alternating Direction Implicit) method as a preconditioner for iterative Method for solving large sparse linear systems, because of its suitability for parallel computation. However the classical ADI is not applicable to FE(Finite Element) matrices. In this paper wer propose a Block-ADI method, which is applicable to Finite Element metrices. The new approach is a combination of classical ADI method and domain decompositi on. Also, we provide a partial proof of the convergence based on the results from the regular splittings, in case the discretization metrix is symmetric positive definite.

  • PDF

THE LOWER BOUNDS FOR THE HYPERBOLIC METRIC ON BLOCH REGIONS

  • An, Jong Su
    • Journal of the Chungcheong Mathematical Society
    • /
    • v.20 no.3
    • /
    • pp.203-210
    • /
    • 2007
  • Let X be a hyperbolic region in the complex plane C such that the hyperbolic metrix ${\lambda}_X(w){\mid}dw{\mid}$ exists. Let $R(X)=sup\{{\delta}_X(w):w{\in}X\}$ where ${\delta}_X(w)$ is the euclidean distance from w to ${\partial}X$. Here ${\partial}X$ is the boundary of X. A hyperbolic region X is called a Bloch region if R(X) < ${\infty}$. In this paper, we obtain lower bounds for the hyperbolic metric on Bloch regions in terms of the distance to the boundary.

  • PDF

Totally umbilic lorentzian surfaces embedded in $L^n$

  • Hong, Seong-Kowan
    • Bulletin of the Korean Mathematical Society
    • /
    • v.34 no.1
    • /
    • pp.9-17
    • /
    • 1997
  • Define $\bar{g}{\upsilon, \omega) = -\upsilon_1\omega_1 + \cdots + \upsilon_n\omega_n$ for $\upsilon, \omega in R^n$. $R^n$ together with this metric is called the Lorentzian n-space, denoted by $L^n$, and $R^n$ together with the Euclidean metric is called the Euclidean n-space, denoted by $E^n$. A Lorentzian surface in $L^n$ means an orientable connected 2-dimensional Lorentzian submanifold of $L^n$ equipped with the induced Lorentzian metrix g from $\bar{g}$.

  • PDF