• 대한수의학회지
• /
• 제28권2호
• /
• pp.327-329
• /
• 1988

Blood samples were obtained from Korean native cattle and dairy cattle of Holstein species in the slaughter house and methylene blue color tests were performed for the detection of the inherited susceptibitity to hemolysis. Glucose-6-phosphate dehydrogenase activities expressed as the optical density obtained by methylene blue color test were the highest as 0.54 in male Korean cattle, 0.62 in female Korean cattle and 0.72 in dairy cattle of Holstein species. Percent hemolysis, packed cell volume and plasma protein contents were measured and compaired with relation to the results of methylene blue color test and no correlation were observed in each.

• 한국건설순환자원학회논문집
• /
• 제8권3호
• /
• pp.356-364
• /
• 2020

본 연구에서는 광촉매를 혼입한 모르타르의 방오성능을 평가하기 위해 메틸렌 블루를 이용한 실험 연구를 수행하였다. 실험 시편은 시멘트 중량대비 2.5%, 5.0%, 7.5% 및 10.0%의 광촉매를 혼입하여 모르타르 시편을 제작하였고, 시편 표면에 스크래치 형태로 조도를 설정하였다. 표면 조도는 3가지로 조도가 없는 경우, 조도가 작은 경우(중간 조도), 조도가 큰 경우(거친 조도)로 설정하였다. 모르타르 시편 제작 후 24시간 동안 자외선램프 조사와 12시간 동안 메틸렌 블루 컨디셔닝 용액에 침지 하는 전처리 과정을 진행하였다. 실험챔버에 전처리가 완료된 모르타르 시편을 배치 후 48시간 동안 자외선램프를 조사하였고 시간에 따라 메틸렌 블루 수용액의 색 변화를 분광측색계를 이용하여 측정하였다. 광촉매의 혼입량이 증가할수록 메틸렌 블루 색 변화는 증가하는 경향을 나타내며 이는 방오성능이 증가하는 것을 의미한다. 반면에 표면조도가 증가할수록 메틸렌 블루 용액의 색 변화는 뚜렷한 경향은 나타내지 않으며 표면의 광촉매 분포가 일정하지 않기 때문이다.

• 한국의류산업학회지
• /
• 제15권4호
• /
• pp.630-634
• /
• 2013

Cow leather coated with polyurethane film that contains various organic photosensitizers was investigated to demonstrate the antimicrobial properties in the application of the material to protective clothing and home appliances. To prepare the antimicrobial coating on leather surfaces with high potency against microbes, photoactive agents, such as benzophenone (BP), 4,4'-bis(dimethylamino) benzophenone (MK), 4,4'-dihydroxybenzophenone (DHBP) and methylene blue (MB), were incorporated into polyurethane-based coating solutions. The photoactive antimicrobial agent treated leather samples were characterized by SEM, color appearance, color fastness against abrasion, and antimicrobial tests. The optical properties of organic photosensitizers indicated that active UV absorbance ranges were different: BP (around 250 nm), MK (around 360 nm), DHBP (around 305 nm) and MB (around 295 nm &570 nm-685 nm). The intensity of the UV absorbance curve at the UVA light wavelength for the antimicrobial test showed the highest value with MK; subsequently, this was followed by MB, DHBP and BP in decreasing order. The treated-leather samples demonstrated excellent antibacterial activity under UVA light. The antimicrobial effects for the Staphylococcus aureus were superior to Escherichia coli. Moreover, the polyurethane finishing showed an effective durability to abrasion. The overall results indicated that DHBP is the most suitable PU coating additive to provide antimicrobial properties to leather as well as color and surface appearance than MK, MB, and BP.

• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.56-65
• /
• 2022

본 연구에서는 시설물의 자기정화성능을 확보하기 위하여 이산화티탄 광촉매 용액을 코팅한 모르타르의 자기정화성능을 분석하였다. 광촉매 코팅 용액의 농도(1.5 %와 3.0 %), 초친수강화 용액 적용 유무 및 프라이머 용액의 사용 유무를 실험변수로 고려하였다. 광촉매 농도가 증가할수록 메틸렌블루 수용액의 색상 변화율이 증가하였으며, 이는 광촉매 농도가 증가할수록 자기정화성능이 증가하는 것을 나타낸다. 초친수성 광촉매 용액의 적용은 일반 광촉매 용액에 비해 자기정화성능을 다소 감소시킬 가능성이 있음을 나타낸다. 또한, 프라이머를 사용한 모르타르의 자기정화성능은 프라이머를 사용하지 않은 모르타르의 자기정화성능과 뚜렷한 차이를 나타내지 않는다. 한편, 낮은 농도(1.5 %)로 코팅된 모르타르에 비해 높은 농도(3.0 %)로 코팅된 모르타르 시편 표면의 코팅 균열이 미세하여 상대적으로 큰 광촉매 반응면적을 확보하고 자기정화성능 증가에 유리한 영향을 미친 것으로 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제32권6호
• /
• pp.542-549
• /
• 2007

본 연구의 목적은 네 종류의 복합레진의 연마 후의 표면 거칠기에 있어서의 차이와 염색액에 담근 후 색 안정성에 있어서의 차이를 평가하기 위한 것이다. 필러 크기와 함량이 다른(나노입자형, 혼합형, 미세입자형, 흐름성) 네 종류의 광중합 복합레진(색상 A2)을 사용하였다. 산화 알루미늄 마모 디스크(Super-Snap)로 연마하기 전과 후에 평균 표면 거칠기(Ra)를 표면 조도 측정기 (Surftest Formtracer)로 측정하였다. 2% 메틸렌 블루 용액으로 착색하기 전과 후 표본의 색은 SCI geometry를 이용해 spectrophotometer(CM-3700d)로 측정되었다. 표면 거칠기와 색 변화 값은 one-way ANOVA, Scheffe multiple comparison test와 Student t-test로 분석되었다. 연마 후, 표면 거칠기 값은 복합레진의 종류에 관계없이 감소하였다. 연마 후 표면 거칠기와 착색 후 색 안정성에 있어서, 나노입자형 복합레진이 흐름성 레진을 제외한 다른 복합레진들과 유사하였다.

• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.379-386
• /
• 2001

This study was performed to evaluate the sealing ability of various retrograde filling materials by using bacterial penetration and dye penetration test. One hundred and forty extracted human teeth with single, straight canals and mature apiece were collected and used for this study. All canals were instrumented using an engine driven Ni-Ti file (ProFile). After removing 3mm from the apex of tooth, a standardized 3mm root end cavity was prepared using an ultrasonic instrument. The 70 teeth were randomly divided into 7 groups : 6 groups for retrograde filling using Super-EBA, ZOE, Chelon-Silver, IRM, ZPC and amalgam. The 7th group was used as a negative control. Nail varnish was applied to all external root surfaces to the level of the reseated root ends to prevent lateral microleakages. The specimens were then sterilized in an ethylene oxide sterilizer for 24 hours. 2 mm of the reseated root was immersed in a culture chamber containing a Tripticase Soy Broth with a phenol red indicator. The coronal access of each specimen was inoculated every 72 hours with suspension of Proteus vulgaris. The culture media were observed every 24hours for color change indicating bacterial contamination. The specimens were observed for 4weeks. The remaining 70 teeth were submitted to a dye penetration test. The canals of all teeth were first sealed with AH26 and obturated using an Obtura II system. Root resection, root end preparation and retrograde filling was performed as above. All specimens were suspended in 2% methylene blue dye for 72 hours before being ion gitudinally split. The degree of dye penetration was then measured using a stereomicroscope at 10 magnification and evaluated. The results were as floows : 1. In the bacterial penetration, the degree of leakage was the lowest in the Super-EBA, followed by, in ascending order, ZOE, Chelon-Silver IRM and ZPC. The amalgam showed highest bacterial leakage of all(p<0.01). 2. In the dye penetration, the degree of microleakage was the lowest in the Chelon-Silver and Super-EBA, followed by, in ascending order, IRM, ZPC. The ZOE and amalgam showed the highest microleakage of all (p<0.05). These results suggested that the eugenol based cement, Super-EBA, have excellent sealing ability as a retrograde filling material.