• Title/Summary/Keyword: methyl ether

Search Result 431, Processing Time 0.027 seconds

Changes of Volatile Flavor Compounds of Seibel Grape Must during Alcohol Fermentation and Aging (Seibel 포도즙 알코올 발효 및 저장 중 휘발성 향기성분의 변화)

  • 고경희;장우영
    • Microbiology and Biotechnology Letters
    • /
    • v.27 no.6
    • /
    • pp.491-499
    • /
    • 1999
  • A great variety of the volatile metabolic by-products was formed in yeast cell during alcohol fermentation. The seibel grape (Vitis labrasca) which was grown in the Southern Korea used for wines. The objective of this research was to identify the volatile flavor compounds during alcohol fermentation and aging at 12$^{\circ}C$. saccharomyces cerevisiae and Schizosaccharomyces pombe were inoculated and fermented in seibel grape must. The volatile flavor compounds of logarithmic, stationary and death phases were extracted, concentrated and identified by gas chromatography/mass spectrometer (GC/MS). The volatile flavor compounds were determined by a Hewlett-Packard 5890 II Plus GC which was equipped with Supelcowax 10 fused silica capillary column (60m$\times$0.32mm$\times$0.25${\mu}{\textrm}{m}$ film thickness) wall coated with polyethyleneglycerol. The scan detection method allowed the comparison of the spectrum from the chromatogram of volatile flavor compounds to those in data Wileynbs base library. Among the volatile compounds collected by ether-hexane extraction method, the evolution of 20 main compounds, such as 9 esters (ethyl butyrate, isoamyl acetate, ethyl caproate, n-hexyl acetate, ethl caprylate, ethyl caprate, diethy succinate, ethyl hexadecanoate, 2-pheneethyl acetate), 4 alcohols (3-methyl-1-butanol, 1-hexanol, 1-heptanol, benzoethanol), 4 ketones and acids (2-octanone, caproic acid, caprylic acid, capric acid), 2 furan and phenol (2,6-bis(1,1-dimethyl ethyl)phenol, 2,3-dihydrobenzofuran) were observed during alcohol fermentation and aging. The production of the esters during alcohol fermentation with S. cerevisiae was higher than those of Sch. pombe. The sensory scores of the aged wine samples in aroma, taste and overall acceptability were not significantly different(p<0.05).

  • PDF

Bioequivalence of Mepiril Tablet to Amaryl Tablet (Glimepiride 2 mg) by Liquid Chromatography/Electrospray Tandem Mass Spectrometry

  • Lee, Heon-Woo;Cho, Sung-Hee;Park, Wan-Su;Im, Ho-Taek;Rew, Jae-Hwan;Lee, Kyung-Tae
    • Journal of Pharmaceutical Investigation
    • /
    • v.35 no.4
    • /
    • pp.287-293
    • /
    • 2005
  • The purpose of the present study was to evaluate the bioequivalence of two glimepiride tablets, Amaryl tablet (Handok & Aventis Korea, reference drug) and Mepiril tablet (Myungmoon Pharm. Co., Ltd., Korea, test drug), according to the guidelines of Korea Food and Drug Administration (KFDA). After adding an internal standard (glibenclamide) to human plasma, plasma samples were extracted using 1mL of methyl tertiary butyl ether. Compounds extracted were analyzed by reverse-phase HPLC with multiple reaction monitoring (MRM) mode analyte detection. This method for determination glimepiride proved accurate and reproducible, with a limit of quantitation of 2 ng/mL in human plasma. Twenty-four healthy male Korean volunteers received each medicine at the glimepiride dose of 2 mg in a $2{\times}2$ crossover study. There was a one-week washout period between the doses. Plasma concentrations of glimepiride were monitored by a LC-MS/MS for over a period of 12 hr after the administration. $AUC_t$ (the area under the plasma concentration-time curve from time zero to 12 hr) was calculated by the linear trapezoidal rule method. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed $AUC_t$ and $C_{max}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the crossover design was properly performed. The 90% confidence intervals of the $AUC_t$ ratio and the $C_{max}$ ratio for Amaryl/Mepiril were log 0.9583-log 1.1357 and log 1.0570-log 1.2376, respectively. These values were within the acceptable bioequivalence intervals of log 0.80-log 1.25. Taken together, our study demonstrated the bioequivalence of Amaryl and Mepiril with respect to the rate and extent of absorption.

Validation of and HPLC Method for Nadolol in Human Plasma and Evaluation of Its Pharmacokinetics after a Single-dose in Korean Volunteers (인체 혈장 중 나돌올의 HPLC 분석법 검증 및 단회투여 후 약물동태 연구)

  • Kang, Choon-Mo;Trung, Tarn-Quoc;Kim, Kyeong-Ho;Myung, Ja-Hye;Hwang, Sung-Joo;Kim, Mi-Young;Kuh, Hyo-Jeong
    • Journal of Pharmaceutical Investigation
    • /
    • v.35 no.6
    • /
    • pp.431-436
    • /
    • 2005
  • A high-performance liquid chromatographic method was validated for quantitation of nadolol in human plasma. Nadolol and internal standard, pindolol, were extracted with tert-butyl methyl ether after addition of 10 M sodium hydroxide solution. The analytes were separated on a reverse phased C18 column using a mobile phase consisting of 0.05 M ammonium phosphate monobasic buffer, acetonitrile and methanol (81: 17:2 v/v/v) and detected using a fluorescence detector (excitation wavelength 230 nm, emission wavelength 294 nm). The method was specific and sensitive enough to detect as low as 3 ng/mL of nadolol in human plasma. Linear calibration range was 3-150 ng/mL with correlation coefficient greater than 0.999. The overall accuracy was in the range of 96.8 to 103% and precision C.V.(%) 7.30 to 12.2%. The recovery was approximately 100% and stability was confirmed during storage and sample preparation. The present HPLC method was successfully applied to study bioavailability after oral administration of 80 mg of nadolol in healthy Korean subjects. The mean $AUC_{t}$ was $1968{\pm}397\;ng{\cdot}hr/mL$ and $C_{max}$ of $186{\pm}79.3\;ng/mL$ was reached at $3.5{\pm}0.76\;hr$. The mean $t_{1/2}$ of nadolol was $17.3{\pm}2.59\;hr$.

Vapor Permeation Separation of MTBE-Methanol Mixtures Using Cross-linked PVA Membranes (가교된 PVA 막을 이용한 MTBE/methanol 혼합물의 증기투과(Vapor Permeation)분리)

  • 김연국;임지원
    • Membrane Journal
    • /
    • v.10 no.3
    • /
    • pp.148-154
    • /
    • 2000
  • Poly(vinyl alcohol)(PVA)/sulfur-siccinic acid(SSA) membrane performances have been studied for the vapor permeation separation of methyl tort-butyl ether(MTBE)/methanol mixtures with varying operation temperatures, amount of cross-linking agents, and feed compositions. 1'here are two factors, the membrane network and the hydrogen bonding, in the swelling measurements of PVA/SSA membranes. These two factors act interdependently on the membrane swelling. The sulfuric acid group in SSA took an important role in the membrane performance. The cross-linking effect might be more dominant than the hydrogen bonding effect due to the sulfuric acid group at 7% SSA membrane. Hydrogen bonding effect was more important for 5% SSA membrane. In vapor permeation, density or concentration of methanol in vapor feed is lower than that of methanol in liquid feed, as a result, the hydrogen bonding portion between the solvent and the hydroxyl group in PVA is reduced in vapor permeation. In this case, the 7% SSA membrane shows the highest separation factor of 2187 with the flux of 4.84g/$m^2$hr for MTBE/methanol=80/20 mixtures at 3$0^{\circ}C$.

  • PDF

Studies on the Dynamic Surface Tension of GL12 and Anionic Mixtures (N-Dodecanoyl, N-Methyl Glucamine(GL 12)과 음이온 계면활성제 혼합물의 Dynamic Surface Tension에 관한 연구)

  • Ahn, Ho-Jeong;Choi, Kyu-Suk
    • Applied Chemistry for Engineering
    • /
    • v.7 no.1
    • /
    • pp.101-108
    • /
    • 1996
  • The dynamic surface tension of GL12 (easily biodegradable nonionic surfactant and mild to skin), LAS and SLES aqueous solutions and that of mixed surfactant systems were measured by the maximum bubble pressure method at different mixing ratios. The effects of various salt such as NaCl, CsCl and urea on the dynamic surface tension of mixed surfactant systems were also studied. The dynamic surface tension of GL12 was not influenced by the presence of salts. On the contrary, the dynamic surface tensions of anionic surfactants (LAS and SLES) were significantly affected by the salts. In the mixed surfactant systems, the effect of salt increased as the composition of anionic LAS or SLES increased in the GL12/LAS and GL12/SLES mixtures.

  • PDF

Exhaust Emission Characteristics by Alteration of MTBE Contents in D. I. Diesel Engine (직접분사식 디젤기관에서 MTBE 함유율 변화에 의한 배출가스 특성)

  • O, Yeong-Taek;Choe, Seung-Hun
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.26 no.5
    • /
    • pp.724-732
    • /
    • 2002
  • Although the demands for diesel engine is increased, our world is faced with very serious problems related to the air pollution due to the exhaust emissions of the diesel engine. In this study, the potential possibility of oxygenated fuel such as Methyl tertiary butyl ether (MTBE) was investigated for the sake of exhausted smoke reduction from diesel engine. MTBE has been used as a fuel additive blended into unleaded gasoline to improve octane number, but the study of application for diesel engine was incomplete. Because MTBE includes oxygen content approximately 18%, it is a kind of oxygenated fuel that the smoke emission of MTBE is reduced remarkably compared with commercial diesel fuel, that is, it can supply oxygen component sufficiently at high load and speed in diesel engine. But, the NOx emission of MTBE blended fuel is increased compared with commercial diesel fuel. And. it was tried to analyze not only total hydrocarbon but individual hydrocarbon components from $C_1$to $C_{6}$ in exhaust gas using gas chromatography to seek the reason for remarkable reduction of smoke emission. The results of this study show three conclusions. 1. The smoke omission of the MTBE blended fuel is lower than that of the diesel fuel at all experimental region in direct injection diesel engine. 2. Individual hydrocarbons(C$_1$~ $C_{6}$) as well as total hydrocarbon of oxygenated fuel are reduced remarkably compared with diesel fuel. 3. Smoke emission from diesel engines was strongly depended on oxygen content in fuel regardless of operating condition.

Antineoplastic Natural Products and the Analogues(IX). A Review of the Series

  • Ahn, Byung-Zun;Kim, Shin-Il;Ryu, Sung-Ho;Kang, Kyu-Sang;Lee, You-Hui
    • Korean Journal of Pharmacognosy
    • /
    • v.17 no.2
    • /
    • pp.168-177
    • /
    • 1986
  • Bioassay-directed isolation has yielded some cytotoxic substances against L1210 cell from the Korean traditional medicine. These include 5,2'-dihydroxy-6,7,8,6'-teramethoxyflavone $(IV,\;scutellaria\;root,\;ED_{50}\;=\;1.7\;{mu}g/ml)$, 7-geranyloxycoumarin $(XXXII,\;poncirus\;fruit,\;10.2\;{mu}g/ml) $and panaxydol $(I,\;white\;ginseng,\;0.03\;{mu}g/ml)$. IV, XXXII and their derivatives were synthesized in the purpose of in vivo tests and for observation of structure-activity relations. Among the flavone derivatives, 5,2',6'-trihydroxy-6,7,8-trimethoxy flavone (XVIII), 5-hydroxy-6,7,8-trimethoxy-6'-benzyloxyflavone (XVII) and 5,8-dihydroxy-6,7-dimethoxyflavone (X) showed the cytotoxicity which has no correlation to the flavone structures. Of the coumarins synthesized, 7,8-dihydroxycoumarin (XXVI), 6-7-dihydroxycoumarin (XXIX) and 6-hydroxy-5,7-dimethoxycoumarin (XXXI) showed considerable activities. Acetylated XXXI has moderate activity $(ED_{50}=17.2\;{mu}g/ml)$. Monobydroxycoumarins or their methyl and allyl ether were inactive. IV inhibits the growth of the solid form of S-180 by 70% at 40 mg/kg and shows T/C of 166% on the ascitic S-180 at 40 mg/kg. It strongly inhibits the activity of the membrane bounded ATPase from L1210 cell. The most cytotoxic fraction of the antitumor materials studied is the one from the trichosanthes root showing $ED_{50}=0. 0003\;{mu}g/ml$ against L1210 cell. This fraction, obtained from ethyl acetate extract, showed T/C of 130 and 135%, on ICR mice bearing S-180 and $BDF_1$ mice bearing L1210 at 10 mg/kg and 7.5 mg/kg, respectively.

  • PDF

Actual Assessment to Introduce Bio-ethanol Blended Fuel in Domestic (국내 바이오에탄올 혼합연료유 도입을 위한 실증평가연구)

  • Yim, Eui-Soon;Min, Kyung-Il;Jeon, Cheol-Hwan;Lee, Don-Min;Kim, Jong-Ryeol;Kim, Seung-Soo;Jang, Eun-Jung;Park, Cheon-Kyu;Jung, Chung-Sub;Kim, Jae-Kon;Lim, Young-Kwan;Shin, Seong-Cheol
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2007.11a
    • /
    • pp.649-653
    • /
    • 2007
  • 국제 원유가의 지속적인 상승에 따라 화석연료 고갈을 대비한 대체에너지 빛 온실가스배출감소를 위하여 바이오연료의 사용 및 상용보급은 전세계적인 추세이다. 우리나라의 경우 바이오디젤은 2002년부터 시범보급사업(Demonstration & dissemination)을 거쳐 2006년 7월부터 전국주유소를 통하여 경유 중에 바이오디젤 0.5%를 혼합한 BDO.5를 수송용 연료로 도입하여 아시아 최초로 상용보급화를 시행하고 있다. 또한 휘발유 중 바이오에탄올 혼합 연료유 도입을 위한 실증평가연구를 2006년 8월부터 2008년 7월까지 수행중이다. 자동차용 휘발유의 옥탄가 향상을 위해 함산소 기재로 사용되는 MTBE(Methyl Tertiary Butyl Ether)를 바이오에탄올로 대체한 바이오에탄올 혼합연료유는 수분 혼입에 의한 상 분리(Phase separation)와 금속에 대한 부식성 문제를 야기 시킬 수 있다. 바이오에탄올을 서브옥탄가솔린(Sub-octane gasoline)에 혼합하여 상 분리 모사실험, 금속류 부식시험, 고무류 침지실험 등 다양한 품질특성평가를 수행하였으며, 이런 결과들을 바탕으로 국내실정에 알맞은 최적의 혼합량(E3, E5)을 도출하였다. 또한 전국에 4개 시범주유소를 운영하여 바이오에탄올 혼합 연료유의 유통 및 보급을 통해 최적의 유통인프라(Distribution infrastructure) 보완 및 구축 방안을 도출 하고자 한다.

  • PDF

The correlation between ionic conductivity and cell performance with various compositions of polymer electrolyte in dye-sensitized solar cells (염료감응형 태양전지에서의 고분자 전해질 종류에 따른 이온전도도와의 상호관계)

  • Cha, Si-Young;Kim, Su-Jin;Lee, Yong-Gun;Kang, Yong-Soo
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2007.11a
    • /
    • pp.306-308
    • /
    • 2007
  • Poly(ethylene glycol) dimethyl ether (PEGDME)/fumed silica/ 1-methyl -3-propylimidazolium iodide (MPII)/$I_2$ mixtures were used as polymer electrolytes in solid state dye-sensitized solar cells (DSSCs). The contents of MPII were changed and the concentration of $I_2$ was fixed at 0.1 mole% with respect to the MPII. The maximum ionic conductivity was obtained at [EG]:[MPII]:[$I_2$]=10:1.5:0.15. It was supposed that the maximum of ionic conductivities would match with that of cell efficiencies, if the ionic conductivity is a rate determining step in the sol id state DSSCs. However, the maximum composition did not show the maximum solar cell performance, indicating the mismatch between ionic conductivity and cell performance. This suggests that the ionic conductivity may not be the rate controlling step in determining the cell efficiency in these experimental conditions, whereas other parameters such as the electron recombination might play an important role. Thus, we tried to modify the surface of the $TiO_2$ particles by coating a thin metal oxide such as $Al_2O_3$ or $Nb_2O_5$ layer to prevent electron recombination. As a result, the maximum of the cell efficiency was shifted to that of the ionic conductivity. The peak shifts were also attempted to be explained by the diffusion coefficient and the lifetime of electrons in the $TiO_2$ layer.

  • PDF

Maillard Reaction Products Formed from D-Glucose-Glycine, System and Their Formation Mechanism (D-Glucose-Glycine 계의 Maillard 반응생성물 및 그 생성기구)

  • KIM Seon-Bong;PARK Yeung-Ho
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.19 no.1
    • /
    • pp.45-51
    • /
    • 1986
  • Equimolar aqueous solutions of D-glucose and glycine were heated at $50^{\circ}C\;and\;95^{\circ}C$ at pH 6.7. The headspace volatiles and the ether extracts from the reaction mixture were analyzed by gas chromatography and gas chromatography-mass spectrometry using a fused silica capillary column. The major components formed were identified as diacetyl, three furfurals, two pyrroles, one furanone, two pyranones and two amides. In order to elucidate the formation mechanisms of the amides formed front amino-carbonyl reaction, two model systems were adopted. N-butylacetamide were formed as major components from diacetyl-butylamine ana glyoxal-butylamine systems, respectively. The results obtained suggest that such ${\alpha}-dicarbonyls$ as 3-deoxy-D-erythro-2,3-hexodiulose and diacetyl generated in the amino-carbonyl reaction react with amino compounds, amides then being formed by cleavage of the C-C bond in the ${\alpha}-dicarbonyls$.

  • PDF