• Korean Membrane Journal
• /
• v.9 no.1
• /
• pp.43-51
• /
• 2007

This paper describes the preparation and characterization of two kinds of fluorinated polybenzimidazole (PBI)s which can be potentially used for phosphoric acid-doped, high-temperature polymer electrolyte membrane fuel cells. Two kinds of perfluorocyclobutane (PFCB)-containing monomers were prepared via following synthetic steps; after fluoroalkylation of methyl 3-(hydroxy) benzoate and methyl 4-(hydroxy) benzoate with 1,2-dibromotetrafluoroethane and subsequent Zn-mediated dehalogenation, these compounds were cyclodimerized at $200^{\circ}C$ affording the ester-terminated monomers containing PFCB ether groups. The synthesized intermediates and monomers were characterized using FT-IR, $^1H-NMR,\;^{19}F-NMR$, and mass spectroscopy. The fluorinated PBIs were then successfully prepared through the solution polycondensation of the monomers and 3,3'-diaminobenzidine in polyphosphoric acid. Compared with traditional PBI, the glass transition temperatures of the fluorinated PBIs were obtained at $262^{\circ}C\;and\;269^{\circ}C$ which are lower than that of PBI and their initial degradation temperatures were still high over $400^{\circ}C$ under nitrogen. The fluorinated PBIs showed higher d-spacing values and improved solubility in several organic solvents as well as phosphoric acid, which confirmed they could be good candidates for the high temperature fuel cell membranes.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.5
• /
• pp.638-648
• /
• 2004

In many drinking water treatment plants, chlorination process is one of the main techniques used for the disinfection of water. This disinfecting treatment leads to the formation of haloacetic acid (HAAs). In this study, headspace solid-phase microextraction (HS-SPME) was studied as a possible alternative to liquid-liquid extraction for the analysis of HAAs in drinking water. The method involves direct derivatization of the acids to their methyl esters without methyl tert-butyl ether (MTBE) extraction, followed by HS-SPME with a $2cm-50/30{\mu}m$ divinylbenzene/carboxen/polydimethylsiloxane fiber. The effects of experimental parameters such as selection of SPME fiber, the volume of sulphuric acid and methanol, derivatization temperature and time, the addition of salts, extraction temperature and time, and desorption time on the analysis were investigated. Analytical parameters such as linearity, repeatability and limit of detection were also evaluated. The $2cm-50/30{\mu}m$-divinylbenzene/carboxen/polydimethylsiloxane fiber, sulphuric acid of 1ml, methanol of 3ml, derivatization temperature of $50^{\circ}C$ derivatization time of 2hrs, sodium chloride salt of 10g, extraction time of 30 minutes, extraction temperature of $20^{\circ}C$ and desorption time of 1 minute at $260^{\circ}C$ were selected as the optimal experimental conditions for the analysis of HAAs. The linearities ($r^2$), relative standard deviations (%RSD) and limits of detection (LOD) for HAAs were 0.9978~0.9991, 1.1~9.8% and $0.05{\sim}0.2{\mu}g/l$, respectively.

• Preventive Nutrition and Food Science
• /
• v.21 no.2
• /
• pp.155-159
• /
• 2016

Previous research showed that resveratrol (trans-3,4',5-trihydroxystilbene) and pinostilbene (trans-3-methoxy-4',5-dihydroxystilbene) were able to inhibit tyrosinase directly; however, anti-melanogenic effects of pterostilbene (trans-3,5-dimethoxy-4'-hydroxystilbene) and resveratrol trimethyl ether (RTE) have not been compared. To investigate the hypopigmentation effects of pterostilbene and RTE, melanin contents and intracellular tyrosinase activity were determined by western blot analysis. Firstly, pterostilbene showed the inhibitory effects on ${\alpha}$-melanocyte stimulating hormone (MSH)-induced melanin synthesis stronger than RTE, resveratrol, and arbutin. Pterostilbene inhibited melanin biosynthesis in a dose-dependent manner in ${\alpha}$-MSH-stimulated B16/F10 murine melanoma cells. Specifically, melanin content and intracellular tyrosinase activity were inhibited by 63% and 58%, respectively, in response to treatment with $10{\mu}m$ of pterostilbene. The results of western blot analysis indicated that pterostilbene induced downregulation of tyrosinase protein expression and suppression of ${\alpha}$-MSH-stimulated melan-A protein expression stronger than RTE or resveratrol. Based on these results, our study suggests that pterostilbene can induce hypopigmentation effects more effectively than resveratrol and RTE, and it functions via downregulation of protein expression associated with hyperpigmentation in ${\alpha}$-MSH-triggered B16/F10 murine melanoma cells.

• Archives of Pharmacal Research
• /
• v.23 no.4
• /
• pp.315-323
• /
• 2000

Syntheses of new analogues of oxathiin carboxanilide (UC84) and their antiviral activities were described. The heterocyclic carboxylic acids including oxathiins (4), thiazines (9) and dithiins (13) in which the methyl was replaced either by lipophilic trifluoromethyl- or bulky phenylgroup were synthesized starting from $\beta$-keto esters (5). Reaction of 4, 9 and 13 with thionyl chloride followed by treatment of the substituted aniline 22 gave the corresponding carboxanilides (24a~24f). The carboxanilides were subjected to Laweson's reagent the corresponding thiocarboxanilides (24g~24k). The antiviral activities of the synthesized compounds against human immunodeficiency virus type 1 (HIV-1), poliovirus type 1 (PV-1 ), coxsackie B virus type 3 (CoxB-3), vesicular stomatitis virus (VSV) and herpes simplex virus type 1 (HSV-1) were presented. The antiviral activity against HIV-1 of dithiin carboxanilide (24e) was similar with that of UC84 (24a). The corresponding thiocarboxanilides (24g~24k) showed higher inhibitory activity against HIV-1 than the carboxanilides (24a, 24b, 24d, 24e). The compounds in which ether the lipophilic trifluorormethyl substituents (24d, 24f, 24i ,24k) or bulky phenyl substituent is present in the heterocyclic compounds showed lower inhibitory activity than that of the methyl substituents is present in the compounds against the HIV-1. But the trifluoromethylated dithiin (24f) showed higher inhibitory activity against PV-1 and CoxB-3 virus than commercial antiviral agents, ribavirin (RV).

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.251-262
• /
• 2011

Human ether-a-go-go related gene (hERG) potassium channel blockade, an undesirable side effect which might cause sudden cardiac death, is one of the major concerns facing the pharmaceutical industry. The purpose of this study is to develop an in silico QSAR model which uncovers the structural parameters of T-type calcium channel blockers to reduce hERG blockade. Comparative molecular similarity indices analysis (CoMSIA) was conducted on a series of piperazine and benzimidazole derivatives bearing methyl 5-(ethyl(methyl)amino)-2-isopropyl-2-phenylpentanoate moieties, which was synthesized by our group. Three different alignment methods were applied to obtain a reliable model: ligand based alignment, pharmacophore based alignment, and receptor guided alignment. The CoMSIA model with receptor guided alignment yielded the best results : $r^2$ = 0.955, $q^2$ = 0.781, $r^2_{pred}$ = 0.758. The generated CoMSIA contour maps using electrostatic, hydrophobic, H-bond donor, and acceptor fields explain well the structural requirements for hERG nonblockers and also correlate with the lipophilic potential map of the hERG channel pore.

• The Journal of Korean Academy of Prosthodontics
• /
• v.15 no.1
• /
• pp.26-33
• /
• 1977

Present study investigated the effect of Nuva-Lite irradiation on the labial oral mucosa of the albino rats. The specimens were embedded in paraffin wax and stained with histological and histochemical procedures such as hematoxylin-eosin stain, Feulgen reaction, methyl green-pyronin stain, alloxan Schiff reaction, -SH group reaction, PAS reaction, colloidal iron reaction and toluidine blue stain. The specimens 24 hours to 3 days after ultraviolet irradiation exhibited mild intracellular edema in the prickle cell layer. On 6th and 10th day after irradiation rete peg hyperplasia was prominent. Ultraviolet irradiation caused diminution of Feulgen reacted DNA. However, sulfhydril and ${\alpha}$-amino acid radicals were increased at the upper layer of stratified squamous epithelium after irradiation.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.51-58
• /
• 2020

In this study, the thermal oxidation of raw natural rubber (NR) was investigated under controlled conditions by optical image and fourier transform infrared (FT-IR) analysis. The thermal oxidation was performed on a transparent thin film of raw NR coated on a KBr window in a dark chamber at 80℃ under low humidity conditions to completely exclude moisture and restrict light oxidation. Images of the thin film of raw NR were obtained before and after thermal oxidation. FT-IR absorption spectra were measured in the transmission mode at different thermal exposure times. The thermal oxidation of NR was examined by the changes in the absorption peaks at 3449, 1736, 1447, 1377, 1242, 1072, and 833 cm^-1, which corresponded to a hydroxyl group (-OH), a carbonyl group (-C=O) from an aldehyde and a ketone, a methylene group (-CH₂-), a methyl group (-CH₃), a carbon-oxygen single bond (-C-O) from an epoxide, a carbon-oxygen bond (-C-O) from an ether, an alcohol, a peroxide, or a cyclic peroxide, and a cis-methine group (cis-CCH₃=CH-), respectively. In the initial stage of thermal oxidation, two different types of free radicals were produced quickly and randomly by the homolytic cleavage of a double bond and allylic hydrogen abstraction. Aldehydes and ketones were formed from chain scissions of the double bonds and alcohols were produced from allylic hydrogen abstraction at the methylene or methyl groups. Two reactions seemed to proceed competitively with each other. At a later stage, oxidative crosslinks seemed to dominate through the combination of free radicals such as an allyl radical (CH=CHCH₂·), alkoxy radical (RO·), and peroxy radical (ROO·) and the reaction of a hydroperoxide (-ROOH) with a double bond. The image obtained after thermal oxidation showed hardening without cracks. Based on these observations, a plausible two-step mechanism was suggested for chain hardening caused by the thermal oxidation.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.437-442
• /
• 2007

Poly(ethylene glycol) methyl ether (PEG)-poly(${\beta}$-amino ester) (PAE) block copolymers were synthesized using a Michael-type step polymerization, and the construction of pH-sensitive polymeric micelles (PM) investigated. The ${\beta}$-amino ester block of the block copolymers functioned as a pH-sensitive moiety as well as a hydrophobic block in relation to the ionization of PAE, while PEG acted as a hydrophilic block, regardless of ionization. The synthesized polymers were characterized using $^1H-NMR$, with their molecular weights measured using gel permeation chromatography. The $pK_b$ values of the pH-sensitive polymers were measured using a titration method. The pH-sensitivity and critical micelle concentration (CMC) of the block copolymers in PBS solution were estimated using fluorescence spectroscopy. The pH dependent micellization behaviors with various bisacrylate esters varied within a narrow pH range. The critical micelle concentration at pH 7.4 decreased from 0.032 to 0.004 mg/mL on increasing the number of methyl group in the bisacrylate from 4 to 10. Also, the particle size of the block copolymer micelles was determined using dynamic light scattering (DLS). The DLS results revealed the micelles had an average size below 100 nm. These pH-sensitive polymeric micelles may be good carriers for the delivery of an anticancer drug.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.282-293
• /
• 2008

Partially sulfonated poly(aryl ether sulfone) membranes were prepared from the sulfonated sulfone monomer, which was synthesized by a nucleophilic substitution, non-sulfonated monomers and potassium carbonate by a direct polymerization method and a subsequent solution casting technique with mixed solvents of N-methyl-2-pyrrolidone (NMP) and dimethylacetamide (DMAc). To investigate the effect of mixed solvent, the volume ratios of NMP and DMAc were varied in the range of $0{\sim}100%$ and the degrees of sulfonation of the copolymers were fixed as 50%. The surface properties of the resulting membranes were examined by scanning electron microscope (SEM) and atomic force microscope (AFM), and a comparative study of the morphology changes and the physicochemical properties such as proton conductivity and methanol permeability was achieved. It was found that proton conductivities depend on the volume ratio of NMP-DMAc mixed solvents, and the proton conductivity determined at the condition of $25^{\circ}C$ and 100% relative humidity was $1.38{\times}10^{-1}\;S/cm$ for the membrane prepared in the 50:50 v/v-% of NMP : DMAc mixed solvent.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.291-301
• /
• 2009

Double-layered polymer electrolyte membranes were prepared from two different sulfonated poly(aryl ether sulfone) copolymers by the two-step solution casting method for direct methanol fuel cells (DMFC). Sulfonation degrees were adjusted 10% (SPAES-10) and 50% (SPAES-50) by controlling monomer ratios, and the weight ratios of SPAES-10 copolymer were varied in the range of 5~20% to investigate the effect of thickness of coating layers on the membranes. Proton conducting layers were fabricated from SPAES-50 solutions of N-methyl-2-pyrrolidone (NMP) by a solution casting technique, and coating layers formed on the semiliquid surface of the conducting layer by pouring of SPAES-10-NMP solutions onto. It was found that double-layered polymer electrolyte membrane could significantly reduce the methanol crossover through the membrane and maintain high proton conductivities being comparable to single-layered SPAES-50 membrane. The maximum power density of membrane-electrolyte assembly (MEA) at the condition of $60^{\circ}C$ and 2 M methanol-air was $134.01\;mW/cm^2$ for the membrane prepared in the 5 wt-% of SPAES-10 copolymer, and it was corresponding to the 105.5% of the performance of the commercial Nafion 115 membrane.