• Journal of Ginseng Research
• /
• v.31 no.2
• /
• pp.74-78
• /
• 2007

Multi-drug resistance (MDR) is a major problem in cancer chemotherapy and has often ended up with termination of the therapy. The aim of this study was to identify any fractions of Korean red ginseng that would be effective in modulating for MDR. Although ginsenosides have been reviewed as possible MDR modulators, the MDR modulation activity of the other component is unknown. Therefore, a red ginseng was extracted with methanol, ether, ethylacetate, and n-butanol, followed by several fractionations by silica gel chromatography. And the activity of MDR modulating for these fractions was examined via sulforrhodamine B assay. We have found that several ether fractions, as nonsaponin components are effective on MDR modulation. We have expect that these results helpful to improvement of cancer chemotherapy.

• Korean Journal of Materials Research
• /
• v.13 no.12
• /
• pp.796-800
• /
• 2003

The polypyrrole prepared with pyrrole monomer, APS and DBSA was synthesized by chemical Polymerization at $V^{\circ}C$ under atmosphere conditions. After dissolving polypyrrole powder to the chloroform including DBSA, polypyrrole film was prepared on the alumina substrate with an interdigitated electrode by using the dip-coating method. This film was soaked in methanol solvent for 1 h at room temperature and heated to $70^{\circ}C$ for 4 h in $N_2$. Initial resistance was increased with the increasing humidity and decreasing temperature. The sensitivity was increased with lower humidity and decreasing temperature. The best linearity was achieved at $25^{\circ}C$ and low humidity of 0%.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.196-208
• /
• 2018

The effect of channel-system of zeolite on methanol-to-DME reaction was studied. Results revealed that channels size and topology affect catalyst lifetime, type and location of coke precursors. FER and MFI showed the best resistance towards coke deposition, whilst fast deactivation was observed on MOR. Although the higher concentration and strength of acid sites, FER structure formed a lower coke amount, preferably located within the pores, while coke cluster deposited on the external surface of MOR. Analysis of acid sites distribution and strength was performed during deactivation-regeneration process. Coke location assessment was also supported by molecular simulations.

• Korean Journal of Pharmacognosy
• /
• v.53 no.1
• /
• pp.21-28
• /
• 2022

Sparassis crispa is an edible mushroom that has been widely utilized in Japan and Korea. It has various biological activities, such as anti-hypertensive, anti-allergic, anti-diabetic, anti-inflammatory, anti-angiogenic, and anti-cancer effects. In this study, we investigated the anticancer activity and underlying molecular mechanism of chloroform fraction of methanol extract of S. crispa (CESP) against cervical cancer stem cells (CSCs), which contribute to tumor initiation, recurrence, and resistance to therapy of human cervical cancer. CESP effectively inhibited the proliferation, tumorsphere formation, and migration of HeLa-derived cervical CSCs by promoting apoptosis. In addition, CESP significantly downregulated the expression of key cancer stemness markers, including integrin α6, CD133, CD44, ALDH1A1, Nanog, Oct-4, and Sox-2, in HeLa-derived cervical CSCs. Furthermore, CESP remarkably suppressed in vivo tumor growth of HeLa-derived cervical CSCs in a chick embryo chorioallantoic membrane (CAM) model. Therefore, our findings suggest that CESP has potential as a natural medicine for the prevention and treatment of cervical cancer by targeting CSCs.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1433-1438
• /
• 2007

Characteristics of a phase change type micro actuator have been studied. The micro actuator has been designed for a micro-pump in an active direct methanol fuel cell(DMFC), consisting of an actuating chamber, a membrane, an electric heater, and a sensor of resistance temperature detector (RTD). In the present study, researches have been focused on the response of the actuator to control algorithm of the heater. The experiments demonstrated that the displacement of the membrane increase with temperature variation which is a function of applied voltage, duty ratio, and operating frequency of heating. The results also showed that operation of the actuator with high voltage at small duty of heating is more efficient than the same power consumption of heating with low voltage at large duty.

• Natural Product Sciences
• /
• v.18 no.4
• /
• pp.211-214
• /
• 2012

Since 15-hydroxyprostaglandin dehydrogenase (15-PGDH) is the key metabolic enzyme of prostaglandin $E_2$ ($PGE_2$), inhibition of 15-PGDH is supposed to facilitate various physiological functions by increasing $PGE_2$. Methanol extract of Artemisia argyi (AAME) inhibited 15-PGDH ($IC_{50}$: $13.13{\mu}g/mL$) with relatively low cytotoxicity ($IC_{50}$: $415.00{\mu}g/mL$) and elevated extracellular $PGE_2$ levels in HaCaT cells. Real-time PCR analysis showed that AAME decreased significantly mRNA expression of PG transporter (PGT) in HaCaT cells. These results indicate that AAME could be applicable to functional materials as a 15-PGDH inhibitor and PGT expression inhibitor for the upregulation of extracellular $PGE_2$ level.

• Journal of Environmental Science International
• /
• v.17 no.2
• /
• pp.211-224
• /
• 2008

Characteristics of the esterification reaction between free fatty acid in rice bran oil and methanol was investigated in the presence of catalysts, such as PTS(p-toluene sulfonic acid), Amberlyst 15 dry and SCX(silica gel based strong cation exchange resin). While reaction temperature was kept constant at $65^{\circ}C$, initial feed content of free fatty acid was varied from 100% to 1% by addition of pure free fatty acid which was previously made from rice bran oil. Also, the effect of mole ratio of methanol to fatty acid on the final conversion was examined. When esterification of pure free fatty acid was catalyzed by several acids, final conversions were increased in order of Amberlyst 15 dry, SCX and PTS. Using PTS catalyst, initially the reaction proceeded in homogeneous 2nd oder reaction mechanism. However, phase of reaction mixture changed from homogeneous to heterogeneous along the reaction time and then reaction rate was retarded by mass transfer resistance of methanol. Final conversion of free fatty acid in reaction mixture was depended on initial feed content of free fatty acid, and had maximum value at 30% of initial feed free fatty acid content for all kinds of catalysts used. And the final conversion was increased with mole ratio of methanol by the improvement of reaction rate. When initial feed free fatty acid content below 10% and the reaction was catalyzed by PTS, concentration of free fatty acid in reaction mixture was increased in the middle of reaction time by hydrolysis of triglyceride in reaction mixture. Also, if silica gel was added into the reaction mixture which had initial feed free fatty acid content below 50%, final conversion was increased by the adsorption of moisture produced. The SCX catalyst made the esterification reaction of free fatty acid to progress like in case of PTS catalyst. However, when initial feed free fatty acid content below 10%, concentration of free fatty acid in. reaction mixture was decreased monotonically and not increased in the middle of reaction time on the contrary to the case of PTS. Thus, SCX catalyst accomplished more high value of final conversion than PTS catalyst for the initial feed fatty acid content range from 50% to 5% In case of initial feed free fatty acid content of 1% and mole ratio of methanol was 2, concentration of free fatty acid in reaction mixture increased over the initial feed free fatty acid content for all kind of catalysts used. Although SCX catalyst was added into reaction mixture which had 1% of initial feed fatty acid content, final conversion was hardly raised by mole ratio of methanol.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.53-56
• /
• 1969

This experiment was carried out to investigate the effects of alcohols and carbohyrates upon heat resistance of the amylase produced by Bacillus subtilis var. M-181. The results obtained are as follows: 1) Alcohols showed the effects of increasing heat resistance in the order of glycerin, propylene glycol, ethylene glycol, ethanol and methanol, while higher monohydroxy alcohol and dipropylene glycol affected reversely. 2) Inositol affected on heat resistance of the amlase better than sugar alcohols which effects were in the order of mannitol, dulcitol and sorbitol. 3) Monosaccharides affected on heat resistance of the amylase in the order of mannose, galactose, xylose, glucose, arabinose, rhamnose and fructose. 4) Among oligosaccharides, the effects of increasing heat resistance were recognized in the order of melibiose, lactose, maltose and sucrose. 5) Polysaccharides showed the effects of increasing heat resistance in the order of glycogen, soluble starch and dextrin, while the effects of inulin were not recognized.

• Elastomers and Composites
• /
• v.40 no.2
• /
• pp.83-92
• /
• 2005

To develop an automotive fuel hose suitable to the international environmental regulation, FKM rubber materials as an inner material of fuel hole were prepared with different chemical compositions. Measurement of the properties of thermal resistance, oil resistance, fuel resistance, gas permeability including fundamental properties were performed to investigate compatibility for a fuel hose material. Fundamental properties, thermal resistance, oil resistance, fuel resistance and permeability of FKM rubber materials were improved with fluorine content. When the carbon content was 20 phr, FKM compounds with fluorine contents of 66%, 09% and 71% were shown to satisfy the specification oi fuel hose. The gas permeability of NBR and FKM compounds was measured on the mixed fuel oils prepared with isooctane-toluene and gasoline-methanol. FKM rubber materials showed a small difference in penetrated amount of fuel and showed a permeability superior to NBR material. he permeability of FKM rubber materials was not influenced by the contents of fuel oil. Thermal properties of 69% FKM rubber experienced by permeability testing were not variated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.792-796
• /
• 2002

In this work, porous silicon(PS) layer is used as a sensing material to detect organic gases. To do this, PS sensors with membrane structure are fabricated. The sensors were made by applying the technologies of membrane formation by anisotropic etching of silicon, and PS layer formation by anodization in HF solution. From fabricated sensors, current-voltage (I-V) curves were measured against ethanol (called alcohol), methanol and acetone gases evaporated from 0.1 to 0.5% solution concentrations at $36^{\circ}C$. As the result, all curves showed rectifying behavior due to a diode structure between Si and PS, and the conductance of sensor devices increased largely with the organic solution concentration at high voltage of 5V.