• Journal of Ocean Engineering and Technology
• /
• v.34 no.4
• /
• pp.253-262
• /
• 2020

This study provides a comparative analysis of experiments-based enhancements and sensitivity evaluations for the structural design of an automatic ocean salt collector under various load conditions. The sizing variables of the structural members were considered as design factors. The strength and weight performances were selected as output responses. The design of experiments used in the comparative study consisted of the orthogonal array design, Box-Behnken design, and central composite design. The response surface model, one of the metamodels, was applied to the approximate model generation. The design enhancement performance metrics, including numerical costs and weight minimization, according to the design of experiments, were compared from the best design case results. The central composite design method showed the most enhanced design results for the structural design of the automatic ocean salt collector.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.605-607
• /
• 2011

A Study on the flow-structure characteristics of a 3/2 way pneumatic valve is essential for optimizing the performance of ship engines. It is important for the valve to have desirable safety factor am reduced weight from the safety and economic point of view. In this study, we capture flow-structure characteristics of 3/2 way pneumatic valve. This is optimized based on the proper design criteria. The air at a pressure of 30 bar is the working fluid which is made to fill in the tack in short time. This time is defined as the filling time. The flow and structure analysis is performed for three cases under maximum stress and safety factor. In optimum design, considering the flow-structure characteristics, we model twenty seven cases by using DOE(design of experiments) method Here, analysis for each cases is performed and then metamodels are created We obtain optimized parameters and then analysis is repeated to compare with the initial model. Finally, the feasibility of the optimum design is verified.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.9 s.240
• /
• pp.1199-1208
• /
• 2005

Nowadays, it is performed actively to optimize by using an approximate model. This is called the approximate optimization. In addition, the sequential approximate optimization (SAO) is the repetitive method to find an optimum by considering the convergence of an approximate optimum. In some recent studies, it is proposed to increase the fidelity of approximate models by applying the sequential sampling. However, because the accuracy and efficiency of an approximate model is directly connected with the design area and the termination criteria are not clear, sequential sampling method has the disadvantages that could support an unreasonable approximate optimum. In this study, the SAO is executed by using trust region, Kriging model and Optimal Latin Hypercube design (OLHD). Trust region is used to guarantee the convergence and Kriging model and OLHD are suitable for computer experiment. finally, this SAO method is applied to various optimization problems of highly nonlinear mathematical functions. As a result, each approximate optimum is acquired and the accuracy and efficiency of this method is verified by comparing with the result by established method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.115-122
• /
• 2014

Injection pressure is one of factors that influence part quality. In this paper, injection pressure was minimized by optimizing valve gate locations. In order to perform design optimization, MAPS-3DTM (Mold Analysis and Plastic Solution-3D) was used for injection mold analysis and PIAnOTM (Process Integration, Automation and Optimization) was used as process integration and design optimization. Also we adapted meta models based on design of experiments for efficiency. By using introduced methodology, we were able to obtain a result so that maximum injection pressure reduced by 28% compared to the initial design. And the validity of the proposed method could also be demonstrated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.1-9
• /
• 2011

In this study, the specifications of the components of the vent vale were optimally determined in order to enhance the performance of the vent valve. Design objective was to minimize fuel leakage while satisfying the design constraints on the performance indices. To obtain the optimum solution based on real experiments, several design techniques available in PIAnO, a commercial PIDO tool, were used. First, an orthogonal array was used to generate training design points and then real experiments were performed to measure the experimental data at the training design points. Next, Kriging metamodels for the objective function and design constraints were generated using the experimental data. Finally, a genetic algorithm was employed to obtain the optimization results using the Kriging models. Fuel leakage of the optimized vent valve was found to be reduced by 95.8% compared to that of the initial one while satisfying all the design constraints.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.329-334
• /
• 2006

Rail clamps are mechanical components installed to fix the container crane to its bottoms from wind blast or slip. Rail clamps should be designed to survive the harsh wind loading condition. In this study, the jaw structure that is one part of wedge-typed rail clamp is optimized, considering strength under the severe wind loading condition. According to the classification of structural optimization, the structural optimization of a jaw belongs to shape optimization. In the conventional structural optimization methods, they have difficulties in defining complex shape design variables and preventing mesh distortions. To overcome the difficulties, the metamodel using kriging interpolation method is introduced, replacing true response by approximate one. This research presents the shape optimization of a jaw using iterative kriging interpolation models and simulated annealing algorithm. The new kriging models are iteratively constructed by refining the former kriging models. This process is continued until the convergence criteria are satisfied. The optimum results obtained by the suggested method are compared with those obtained by the DOE (design of experiments) and VT (variation technology) methods built in ANSYS WORKBENCH.

• Smart Structures and Systems
• /
• v.14 no.5
• /
• pp.811-830
• /
• 2014

A numerical study has been carried out to simulate an innovative monitoring procedure to detect and localize damage in reinforced concrete beams retrofitted with carbon fiber reinforced polymer (CFRP) unidirectional laminates. The main novelty of the present simulation is its ability to conduct the electromechanical admittance monitoring technique by considerably compressing the amount of data required for damage detection and localization. A FEM simulation of electromechanical admittance-based sensing technique was employed by applying lead zirconate titanate (PZT) transducers to acquire impedance spectrum signatures. Response surface methodology (RSM) is finally adopted as a tool for solving inverse problems to estimate the location and size of damaged areas from the relationship between damage and electromechanical admittance changes computed at PZT transducer surfaces. This statistical metamodel technique allows polynomial models to be produced without requiring complicated modeling or numerous data sets after the generation of damage, leading to considerably lower cost of creating diagnostic database. Finally, a numerical example is carried out regarding a steel-reinforced concrete (RC) beam model monotonically loaded up to its failure which is also retrofitted by a CFRP laminate to verify the validity of the present metamodeling monitoring technique. The load-carrying capacity of concrete is predicted in the present paper by utilizing an Ottosen-type failure surface in order to better take into account the passive confinement behavior of retrofitted concrete material under the application of FRP laminate.

• Structural Engineering and Mechanics
• /
• v.74 no.6
• /
• pp.771-787
• /
• 2020

The paper provides an inside look into experimental measurements, followed by numerical simulations and their related uncertainties. The goal of the paper is to present findings related to blast loading and the handling of defects that are inherent in experiments. Very often it might seem that experiments are simplified reflections of real-life conditions. In most cases this is true, but there is a good reason for that. The more complex an experiment is, the larger the amount of uncertainties that can be expected. This especially applies when the blast loading of concrete is the subject of research. When simulations fail to reproduce the results of experimental measurements, it does not necessarily mean there is something wrong with the numerical model. The problem could be missing information. Put differently, the numerical simulation may lack information that seemed irrelevant with regard to the experiment. In the presented case, a reference simulation with a proven material model unexpectedly failed to replicate the results of an experiment where concrete slabs were exposed to blast loading. This resulted in a search for possible unknowns. When all of the uncertainties were examined, the missing information turned out to be the orientation of the charge to the concrete slab. Since the experiment was burdened with error, a sensitivity study had to take place so the influence of this factor could be better understood. The findings point to the fact that even the smallest defect during experiments must somehow be taken into account when designing numerical simulations. Otherwise, the simulations are not correlated to the experiments, but merely to some expectations.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.29-34
• /
• 2019

If it takes much time to calculate the fitness of the solution in genetic algorithms, it is essential to create a metamodel. Much research has been completed to improve the performance of metamodels. In this study, we tried to get a better performance of metamotel using discrete Walsh transform in discrete domain. We transforms the basis of the solution and creates a metamodel using the transformed solution. We experimented with NK-landscape, a representative function of the pseudo-boolean function, and provided empirical evidence on the performance of the proposed model. When we performed the genetic algorithm using the proposed model, we confirmed that the genetic algorithm found a better solution. In particular, our metamodel showed better performance than that using the radial basis function network that modified the similarity function for the discrete domain.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.432-439
• /
• 2003

Inconel 690 for nuclear steam generator tube has more Chromium than the conventionally used Inconel 600 in order to increase the corrosion resistance. To evaluate the tribological characteristics of Inconel 690 under fretting condition the fretting tests were carried out in air and elevated temperature water. Fretting tests of the cross-cylinder type were done under various vibrating amplitudes and applied normal loads in order to measure the friction forces and wear volumes. From the results of fretting wear tests. the wear of Inconel 690 can be predictable using the work rate model. The amounts of friction forces were proportional to relative movement between two fretting surfaces. The friction coefficients were decreased as increasing the normal loads and deceasing the vibrating amplitudes. Depending on fretting environment, distinctively different wear mechanisms and often drastically different wear rates can occur It was found that the fretting wearfactors in air and water at 2$0^{\circ}C$, 5$0^{\circ}C$, and 8$0^{\circ}C$ were 7.38 $\times$ $10^{-13}$$Pa^{-1}$, 2.12 $\times$$10^{-13}$$Pa^{-1}$, 3.34$\times$$10^{-13}$$Pa^{-1}$and 5.21$\times$$10^{-13}$$Pa^{-1}$, respectively flexibility to model response data with multiple local extreme. In this study, metamodeling techniques are adopted to carry out the shape optimization of a funnel of Cathode Ray Tube, which finds the shape minimizing the local maximum principal stress. Optimum designs using two metamodels are compared and proper metamodel is recommended based on this research.