• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.145-149
• /
• 1995

The metallization is the key to determining cell costs, call performance, and cell and system reliabiltiy. The Burled Contact Solar Cell (BCSC) was specifical1y desinged to be compatible tilth low cost, mass production techniques and avoid the conventional metallization problem. By using electroless plating trchniqeu, we performed this metallization inexpensively and reliabley, This paper presents the details of the optimization procedure of metallization schemes on laser grooved cell surface Commercially available Ni ,Cu, and Ag plating solutions were applied for the cell metallization. The application of those solutions on the buried contact front metalization has resulted in an cell efficiency of 18.5% The cell parameters are an open circuit voltage of 651 mV, short circuit current density of 38.6 mA/$\textrm{cm}^2$, and fill factor of 73.5%.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.239-242
• /
• 2003

Optical module package is a hermetic metal-ceramic package for carrying optical IC. In case of LD(laser diode) module, window is used for both the path of optical signal and hermetic sealing of package. So, window has the metallization pattern on the surface for brazing process with package wall. In this study, several method were investigated for metallization. Thin film, thick film and mixed method were used for fabrication of metallization pattern. After brazing process, hermeticity and adhesion strength were tested for characterization of metallization pattern.

• Korean Chemical Engineering Research
• /
• 제47권2호
• /
• pp.141-149
• /
• 2009

초고속 연산용 CMOS(complementary Metal Oxide Semiconductor) 배선재료로 사용되고 있는 구리(Cu)가, 기가급 메모리 소자용 금속 배선 물질에도 사용이 시작되면서 구리 박막에 대한 재료 및 공정이 새로운 조명을 받고 있다. 반도체 금속 배선에 사용하는 수 nm 두께의 구리 박막의 형성에 전해도금(electrodeposition)과 무전해 도금(electroless deposition) 같은 전기화학적 방법을 이용하게 되어서 표면 처리, 전해액 조성과 같은 중요한 요소에 대한 최신 연구 동향을 요약하였다. 구리 박막에서 구리 배선을 제작하여야 하므로 새로운 패턴 기술인 상감기법이 도입되어, 구리도금과 상감기법과의 공정 일치성 관점에서 전해도금과 무전해 도금의 요소 기술에 대해 기술하였다. 구리보다 비저항이 낮아 차세대 소자용 배선에 있어서 적용이 예상되는 은(Ag)을 전기화학적 방법으로 금속 배선에 적용하는 최신 연구에 대하여도 소개하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.51-52
• /
• 1994

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.164-164
• /
• 1994

• Journal of the Optical Society of Korea
• /
• 제19권3호
• /
• pp.217-221
• /
• 2015

Developing a metallization that has low cost and high efficiency is essential in solar-cell industries, to replace expensive silver-based metallization. Ni/Cu two-step metallization is one way to reduce the cost of solar cells, because the price of copper is about 100 times less than that of silver. Alkaline electroless plating was used for depositing nickel seed layers on the front electrode area. Prior to the nickel deposition process, 2% HF solution was used to remove native oxide, which disturbs uniform nickel plating. In the subsequent step, a nickel sintering process was carried out in $N_2$ gas atmosphere; however, copper was plated by light-induced plating (LIP). Plated nickel has different properties under different bath conditions because nickel electroless plating is a completely chemical process. In this paper, plating bath conditions such as pH and temperature were varied, and the metal layer's structure was analyzed to investigate the adhesion of Ni/Cu metallization. Average adhesion values in the range of 0.2-0.49 N/mm were achieved for samples with no nickel sintering process.

• Fibers and Polymers
• /
• 제3권4호
• /
• pp.147-152
• /
• 2002

Copper (II) salts are used as metallizing agents in the synthesis of new non-genotoxic direct dyes for cotton. Specifically, cotton fabric is dyed with non-genotoxic disazo direct dyes and then treated with copper salts. The complexes are characterized by neutron activation analysis, absorption spectrometry and standard Salmonella mammalian mutagenicity assay, and the after-treated fabrics are evaluated for lightfastness and washfastness. Direct dyes possessing ortho-propoxy and ortho'-hydroxy substituted systems formed the corresponding nonmutagenic 1:2 dye:metal complex and undergo significant improvement in lightfastness following metallization.

• Transactions on Electrical and Electronic Materials
• /
• 제9권6호
• /
• pp.227-230
• /
• 2008

Programmable Metallization Cell (PMC) Random Access Memory is based on the electrochemical growth and removal of electrical nanoscale pathways in thin films of solid electrolytes. In this study, we investigated the nature of thin films formed by the photo doping of copper ions into chalcogenide materials for use in programmable metallization cell devices. These devices rely on metal ions transport in the film so produced to create electrically programmable resistance states. The results imply that a Cu-rich phase separates owing to the reaction of Cu with free atoms from chalcogenide materials.

• 마이크로전자및패키징학회지
• /
• 제27권1호
• /
• pp.1-7
• /
• 2020

The backside metallization process is typically used to attach a chip to a lead frame for semiconductor packaging because it has excellent bond-line and good electrical and thermal conduction. In particular, the backside metal with the Ag/Sn/Ag sandwich structure has a low-temperature bonding process and high remelting temperature because the interfacial structure composed of intermetallic compounds with higher melting temperatures than pure metal layers after die attach process. Here, we introduce a die attach process with the Ag/Sn/Ag sandwich structure to apply commercial semiconductor packages. After the die attachment, we investigated the evolution of the interfacial structures and evaluated the shear strength of the Ag/Sn/Ag sandwich structure and compared to those of a commercial backside metal (Au-12Ge).

• 한국결정성장학회지
• /
• 제14권2호
• /
• pp.58-62
• /
• 2004

The shape evolution of the interface void of copper metallization for intergrated circuits under electromigration stress is modeled. A 2-dimensional finite-difference numerical method is employed for computing time evolution of the void shape driven by surface diffusion, and the electrostatic problem is solved by boundary element method. When the diffusion coefficient is isotropic, the numerical results agree well with the known case of wedge-shape void evolution. The numerical results for the anisotropic diffusion coefficient show that the initially circular void evolves to become a fatal slitlike shape when the electron wind force is large, while the shape becomes non-fatal and circular as the electron wind force decreases. The results indicate that the open circuit failure caused by slit-like void shape is far less probable to be observed for copper metallization under a normal electromigration stress condition.