• 방사성폐기물학회지
• /
• 제14권4호
• /
• pp.305-320
• /
• 2016

원자력발전소 해체 시 발생하는 금속폐기물은 폐기물 중에서 많은 비중을 차지하고 있다. 본 연구에서는 국내 자체처분 규제 요건 및 국내 기관별 자체처분현황을 조사하였다. 실제 원자력발전소 해체 시 발생되는 금속폐기물의 자체처분을 위하여 RESRAD-RECYCLE 코드를 이용하였으며 26가지 시나리오에 대한 선량평가를 수행하였다. 평가결과는 원자력발전소 해체 시 자체처분 및 재활용에 관한 사전자료로서 활용가치가 있을 것으로 사료된다. 추후 자체처분을 통한 처분비용 저감효과 연구가 추가로 가능할 것으로 판단된다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2019년도 춘계학술논문요약집
• /
• pp.63-64
• /
• 2019

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2019년도 춘계학술논문요약집
• /
• pp.116-117
• /
• 2019

• 방사성폐기물학회지
• /
• 제15권2호
• /
• pp.181-189
• /
• 2017

방사성금속폐기물의 관리 옵션들을 안전성, 경제성, 작업자 피폭, 부피 감용 등의 선별 기준을 적용하여 비교 평가하였다. 원전 해체로부터 발생하는 금속폐기물의 관리 옵션에는 무구속 방출, 제한적 재사용, 그리고 직접 처분이 있다. 고려된 각각의 옵션들은 금속폐기물의 절단과 용융에 의한 부피감용을 수반한다. AHP기법을 적용하여 각 옵션들의 순위를 부여하였다. 방사성금속폐기물을 용융하여 금속 잉곳을 제조한 후 제한적 재이용 또는 무구속 방출하는 방안이 가장 효율적인 옵션으로 도출되었다.

• 한국산업융합학회 논문집
• /
• 제22권2호
• /
• pp.105-110
• /
• 2019

Most titanium alloy waste with cutting oil was discarded without recycling process so that it can be caused by metal and oil fires. However, there is no fire management system and studies on the titanium or titanium alloy waste in spite of high fire risk. The purpose of this experimental study is to identify the fire risk of the titanium alloy waste with cutting oil. We collected the 120g waste which was made in the biomedical titanium alloy cutting process. The waste was burned and conducted thermal image analysis with infrared camera. The experimental results which illustrated the process, characteristics, and trends of fire are presented. Firstly, the cutting oil was burned and partially the titanium alloy waste was burned. The maximum temperature of the fire was more than $650^{\circ}C$ in some specific spots. These results means when a lot of titanium alloy waste with cutting oil was ignited, this fire could connect the titanium fire. In other words, the fire has a flammable liquid fire and combustible metal fire at the same time. The experimental study could be used fire prevention, response, and investigation of the titanium alloy waste.

• 한국환경과학회지
• /
• 제24권12호
• /
• pp.1601-1608
• /
• 2015

This study evaluates heavy metal(Cu and Cr) adsorption characteristics produced from food waste charcoal extracted in an optimal operation condition after analyzing activated charcoal of iodine adsorption and heavy metals that derived from an activation process of carbide by the developed by-products of food waste treatment facility using the methods from previous studies. As experiment apparatus, this study used a tube-shaped high temp furnace. The mixing ratio of by-products of food waste treatment facility, carbide, and activation component($ZnCl_2$) was 1:1. The experiment was proceeded as adjusting the activation temperature from 400 to $800^{\circ}C$ and activation time from 30 to 120 minutes. The optimal activation condition for iodine absorption was 90 minutes at $700^{\circ}C$ and by using the produced food waste charcoal, this study conducted an experiment on absorption of heavy metals (Cu and Cr) as changing pH of artificial wastewater and stirring time. As a result, pH 7 showed the highest heavy metal decontamination ratio and in terms of stirring time, it revealed balance adsorption after 10 minutes. This result can be particularly applied as basic data for recyclability of high concentration organic waste, by-products of food waste treatment facility, as an food waste charcoal.

• 공업화학
• /
• 제33권4호
• /
• pp.352-366
• /
• 2022

Nuclear power plant operations for electricity generation, rare-earth mining, nuclear medical research, and nuclear weapons reprocessing considerably increase radioactive waste, necessitating massive efforts to eradicate radioactive waste from aquatic environments. Cobalt (⁵⁸Co) and strontium (⁹⁰Sr) radioactive elements have been extensively employed in energy generation, nuclear weapon testing, and the manufacture of healthcare products. The erroneous discharge of these elements as pollutants into the aquatic system, radiation emissions, and long-term disposal is extremely detrimental to humans and aquatic biota. Numerous methods for treating radioactive waste-contaminated water have emerged, among which the adsorption process has been promoted for its efficacy in eliminating radioactive waste from aquatic habitats. The current review discusses the adsorptive removal of radioactive waste from aqueous solutions using low-cost adsorbents, such as graphene oxide, metal-organic frameworks, and inorganic metal oxides, as well as their composites. The chemical modification of adsorbents to increase their removal efficiency is also discussed. Finally, the current state of ⁵⁸Co and ⁹⁰Sr removal performances is summarized and the efficiencies of various adsorbents are compared.

• 유기물자원화
• /
• 제4권1호
• /
• pp.23-31
• /
• 1996

가정에서 분리수거한 쓰레기와 혼합쓰레기 및 퇴비화 과정중에 있는 쓰레기의 중금속 농도를 측정하였다. 카드뮴의 농도는 봄철에 8 mg/kg 쓰레기, 겨울철에 13 mg/kg 쓰레기였다. 중금속의 농도는 월별로 큰 차이를 보였으며 1월과 2월, 4월, 5월에는 카드뮴의 함량이 부산물 퇴비의 기준인 5 mg/kg 쓰레기의 농도를 초과하였다. 가정쓰레기가 혼합되기 전 분리수거된 음식쓰레기의 퇴비화 과정중에 카드뮴의 함량을 측정한 바, 봄철과 겨울철에 부산물 퇴비화의 기준치를 초과하였다. 분리수거된 가정쓰레기에 수분조절제로 첨가된 석탄회는 퇴비중의 중금속 함량을 낮추는 효과가 있었다. 소형 퇴비화 용기에서 1개월 퇴비화한 음식쓰레기를 야외에서 야적하여 숙성시켰는데, 이 기간동안에 중금속의 축적은 일어나지 않았다.

• 인간식물환경학회지
• /
• 제24권6호
• /
• pp.585-593
• /
• 2021

Background and objective: Illegal open-air incineration, which is criticized as a leading source of air pollutants among agricultural activities, currently requires constant effort and attention. Countries around the world have been undertaking studies on the emission of heavy metal substances in fine dust discharged during the incineration process. A precise analytical method is required to examine the harmful effects of particulate pollutants on the human body. Methods: In order to simulate open-air incineration, the infrastructure needed for incineration tests complying with the United States Environmental Protection Agency (EPA) Method 5G was built, and a large-area analysis was conducted on particulate pollutants through automated scanning electron microscopy (SEM)-energy-dispersive X-ray spectroscopy (EDS). For the test specimen, high-density polyethylene (HDPE) waste collected by the DangJin Office located in Choongcheongnam-do was used. To increase the identifiability of the analyzed particles, the incineration experiment was conducted in an incinerator three times after dividing the film waste into 200 g specimens. Results: Among the metal particulate matters detected in the HDPE waste incineration test, transition metals included C (20.8-37.1 wt%) and O (33.7-37.9 wt%). As for other chemical matters, the analysis showed that metal particulate matters such as metalloids, alkali metals, alkaline earth metals, and transition metals reacted to C and C-O. Si, a representative metalloid, was detected at 14.8-20.8 wt%, showing the highest weight ratio except for C and O. Conclusion: In this study, the detection of metal chemicals in incinerated particulate matters was effectively confirmed through SEM-EDS. The results of this study verified that HDPE waste adsorbs metal chemicals originating from soil due to its own properties and deterioration, and that when incinerated, it emits particulate matters containing transition metals and other metals that contribute to the excessive production and reduction of reactive oxygen species.

• Environmental Engineering Research
• /
• 제24권1호
• /
• pp.82-90
• /
• 2019

Meeting the regulations based on the short-term leaching tests may not necessarily assure the environmental and human health safety of reusing mine wastes. This study investigated heavy metal leachability of four metal mine waste samples (e.g., Z, Y, H, and M) and human health risk of reusing them as construction materials. The heavy metal leachability did not depend on the total heavy metal contents. For example, the Z sample contained greater amounts of As and Fe than Zn, but the leachates contained only Zn at a detectable level. This can be attributed to the crystalline structure and heavy metal fractions of the mine wastes. The leaching test results suggested that the four mine waste samples are potentially reusable. But the Z and M samples reused in industrial areas imposed carcinogenic risks. This was largely attributed to As that is exposed via dermal contact. The Y and H samples reused in residential areas imposed carcinogenic risk. The major exposure route was the ingestion of crops grown on the mine wastes and Cr was the major concern. The two-stage assessment involving leaching tests and risk assessment can be used to promote safe reuse of mine wastes.