• 한국환경과학회지
• /
• 제6권5호
• /
• pp.505-512
• /
• 1997

The Interfacial characteristics between various heavy metals and hydrous FeS were investigated. Heavy metals which have lower sulfide solubilities than FeS undergoes the lecttice exchange reaction when these metal tons contact FeS In the aqueous phase. For heavy metals which have higher suede solubilities than FeS, these metal ions adsorb on the surface of FeS. Such characteristic reactions were interpreted by the soled solution formation theory. The presence of ligand such as EDTA reduced largely metal removal efficiency due to formation of metal-ligand complex In the solution. In an attempt to elucidate the Interfacial characteristics, zeta potential of the hydrous FeS In the absence and In the presence of various metal loons were measured and analyzed.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.1091-1093
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.3120-3122
• /
• 2009

• 상하수도학회지
• /
• 제13권2호
• /
• pp.47-54
• /
• 1999

SRB(Sulfate Reducing Bacteria) converts sulfate into sulfide using an organic carbon source as the electron donor. The sulfide formed precipitates the various metals present in the AMD (Acid Mine Drainage). This study is the fundamental research on heavy metal removal from AMD using SRB. Two completely mixed anaerobic reactors were operated for cultivation of SRB at the temperature of $30^{\circ}C$ and anaerobic batch reactors were used to evaluate the effects of carbon source, COD/sulfate($SO_4^=$) ratio and alkalinity on sulfate reduction rate and heavy metal removal efficiency. AMD used in this study was characterized by low pH 3.0 and 1000mg/l of sulfate and dissolved high concentration of heavy metals such as iron, cadmium, copper, zinc and lead. It was found that glucose was an organic carbon source better than acetate as the electron donor of SRB for sulfate reduction in AMD. Amount of sulfate reduction maximized at the COD(glucose)/sulfate ratio of 0.5 in the influent and then removal efficiencies of heavy metals were 97.5% of Cu, 100% of Pb, 100% of Cr, 49% of Mn, 98% of Zn, 100% Cd and 92.4% of Fe. Although sulfate reduction results in an increase in the alkalinity of the reactor, alkalinity of 1000mg/1 (as $CaCo_3$) should be should be added continuously to the anaerobic reactor in order to remove heavy metals from AMD.

• 한국환경과학회지
• /
• 제8권5호
• /
• pp.593-600
• /
• 1999

In order to determine the changes of sediment facies and metal levels in surface sediments after the construction of Shiwha Lake, surface sediments were sampled at 8 sites located on the main channel monthly from June, 1995 to August, 1996 and analysed for 12 metals (Al, Fe, Mn, V, Cr, Co, Ni, Cu, Zn, Cd, As and Pb) by ICP/AES and ICP/MS. Two groups of sampling sites(the inner lake with 3 sites and the outer lake with 5 sites) are subdivided by the surface morphology ; the inner lake is a shallow channel area with a gentle slope, while the outer lake is relatively deep and wide channel with a steep slope which has many small distributaries. After the construction of dam, fine terrestrial materials were deposited near the outer lake, which resulted in the change of major sediment facies from sandy silt to mud. With the deposition of fine sediments in the outer lake, anoxic water column induced the formation of sulfide compounds with Cu, Cd, Zn and part of Pb. Metal (Cr, Ni, Cu, Zn and Cd) contents in sediments increased up to twice within 2 years after the construction of dam. This is due to the direct input of industrial and municipal wastes into the lake and the accumulation of metals within the lake. In addition, frequent resuspension of contaminated sediments in a shallow part of the lake may make metal-enriched materials transport near the outer lake with fine terrestrial materials. As the enrichment of Cu, Zn, Cd and part of Pb in the Shiwha Lake may be related to the formation of unstable sulfide compounds by sulfate reduction in anoxic water or sediment column, the effect of mixing with open coastal seawater is discussed.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.43-47
• /
• 2000

A study on the remediation of heavily for ion contaminated soils from abandoned iron mine was carried out, using ex-situ extraction process. Also, oxalic acid as a complex agent was evaluated as a function of concentration, reaction time and mixing ratio of washing agent in order to evaluate Fe removability of the soil contaminated from the abandoned iron mine. Oxalic acid showed a better extraction performance than 0.1N-HCl, i.e., the concentrations of Fe ion extracted from the abandoned mine for the former at uncontrolled pH and the latter were 1,750 ppm and 1,079 ppm, respectively. The optimum washing condition of oxalic acid was in the ratio of 1:5 and 1:10 between soil and acid solution during l hr reaction. The total concentrations of Fe ion by oxalic acid and EDTA at three repeated extraction, were 4,554 ppm and 864 ppm, respectively. The recovery of Fe ions from washing solution was achieved, forming hydroxide precipitation and metal sulfide under excess of calcium hydroxide and sodium sulfide. In addition, the amounted of sodium sulfide and calcium hydroxide for the optimal revovery of Fe were 15g/$\ell$ and 5g/$\ell$ from the oxalic acid complexes, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.389.1-389.1
• /
• 2016

The flexible solid state device has been widely studied as portable and wearable device applications such as display, sensor and curved circuits. A zero-bias operation without any external power consumption is a highly-demanding feature of semiconductor devices, including optical communication, environment monitoring and digital imaging applications. Moreover, the flexibility of device would give the degree of freedom of transparent electronics. Functional and transparent abrupt p/n junction device has been realized by combining of p-type NiO and n-type ZnO metal oxide semiconductors. The use of a plastic polyethylene terephthalate (PET) film substrate spontaneously allows the flexible feature of the devices. The functional design of p-NiO/n-ZnO metal oxide device provides a high rectifying ratio of 189 to ensure the quality junction quality. This all transparent metal oxide device can be operated without external power supply. The flexible p-NiO/n-ZnO device exhibit substantial photodetection performances of quick response time of $68{\mu}s$. We may suggest an efficient design scheme of flexible and functional metal oxide-based transparent electronics.

• 대한본초학회지
• /
• 제21권2호
• /
• pp.121-127
• /
• 2006

Objectives : Nickel is a major metal used in the nickel-chromium alloys of most orthodontic appliances, partial denture and implants. This study was carried out for the examination of the cytotoxicity on nickel sulfide in cultured NIH3T3 fibroblasts, and poncirin effect on nickel-induced cytotoxicity. Methods : Cell viability for the MTT assay and cell adhesion activity for the XTT assay. Results : The $IC_{50}$ of nickel sulfide by the MTT assay was $93.7\;{\mu}M$. Poncirin was significantly increased the cell viability and cell adhesion activity. Conclusion : Nickel was highly toxic and poncirin has the inhibitory effects against nickel induced cytotoxicity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1013-1016
• /
• 2003

A new route for the synthesis of silver doped of zinc sulfide phosphor by combustion method has been investigated. Silver nitrate was decomposed with urea or carbohydrazide to give small size particles in presence of alkali metal halides at low temperature compared to the conventional method. The high temperature inherent to the highly exothermic nature of redox reaction leads to well-crystallized powder in short time. The phosphors thus obtained were further heated at $1050^{\circ}C$ in an inert atmosphere for 3hrs to get better luminescence properties.

• 대한화학회지
• /
• 제19권3호
• /
• pp.193-197
• /
• 1975

無煙炭의 燃燒에 있어서 $SO_2 가스의 發生을 抑制하기 위하여 小量의 알칼리 혹은 알칼리 土金屬의 水酸化物을 添加 시키는 것이 效果的이라는 것을 알았다. 그것은 燃燒時에 無煙炭中의 黃分의 大部分이 黃化物 혹은 黃酸鹽의 形態로 炭分中에 固着되기 때문이라고 생각된다. $1000^{\circ}C$로 加熱할 때는 添加劑를 가한 無煙炭中의 黃分의 약 20%가 SO_2$ 가스로 發生한다.