• Korean Journal of Crystallography
• /
• v.5 no.2
• /
• pp.51-66
• /
• 1994

Y3Al5O2 and Nd: Y3Al5012 single crystals were grown by Czochralskl technique. The effectt of pulling rate rotation rate, and doping level of Nd3+ ion on the crystal quality were studied Various types of defects were analysed by photo-elastic effect and chemical etching method Finally, spectroscopic and laser poputies of grown crystal were measured. Optirmum pulling rate for good quality was dependant on the doping level of Nd3+ ion. It was found that the suitable pulling rates for pure Y3Al5O12 for 3.0∼3.5 a/o Nd3+ ion doped Y3Al5012 and for more than 40 a/o Nd3+ ion doped Y3Al5012 were 2∼4mm/hr, 0.6∼0.5mm/hr, and less than 0.4mm/hr respectively. Solid-liquid interface was convex at the rotation rate of 27∼60rpm, and concave at the rotation rate of 80∼100rpm. Growth axis was confired to <111> direction and lattice parameter was measured to 12.017A. Core (211) facets,striations, inclusions of metal particles, dislocations and optical inhonngeneities were detected. Four level laser transition of Nd3+ion in YIAls012 single crystal were identified by the spectroscopic measurements. Laser rod with tam diameter and 63mm length was fabricated from grown Nd3+ Y3Al5012 sin91e crystals. 1.8lJ of lasing threshould and 0.49% of soope efficiency were measured by the Pulsed laser action.

• Journal of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.545-552
• /
• 1991

A mercury ion-sensitive carbon-paste electrode (CPE) was constructed with l-sparteine. Mercury (II) ion was chemically deposited by the complexation with l-sparteine onto the CPE. The surface of CPEs was characterized by cyclic voltammetry and anodic stripping voltammetry in an acetate buffer solution, separately. Exposure of CPEs to acid solution could regenerate surface and reuse it for deposition. In 5 deposition/measurement/regeneration cycle, the response was reproducible and in licnear up to $2.0\;{\times}\;10^{-6}$ M with linear sweep voltammetry. In case of using the differential pulse technique, we have obtained the linear response up to $7.0 {\times}10^{-7}$ M with relative standard deviation of ${\pm}5.1$%. The detection limit was $5.0{\times}10^{-7}$ M for 20 minutes of the deposition. We have investigated the interference effect of various metal ions, which are expected to form the complex with ligand. Silver (I) ion of these has interfered with the analysis of Hg (II) ions. However, pretreatment of the silver (I) ion with potassium chloride led to no interference on the analysis of mercury ions in aqueous solution.

• Journal of the Korean Chemical Society
• /
• v.47 no.6
• /
• pp.547-552
• /
• 2003

Separation and determinations of Co(II) and Ni(II) ions as their 4-(2-pyridylazo)resorcinol(PAR) chelates by reversed-phase capillary high-performance liquid chromatography(RP-CpHPLC) were performed. Among many capillary columns, Vydac C4 column was selected and acetonitrile solution was used as mobile phase. The effect of pH and MeCN concentration(%) on the retention factor, k and peak intensity was examined and discussed. As a results, it was found that 22.5% MeCN and pH 5.60 was adequate as mobile phase for the separation of the two metal ions and determination of Co(II) ion, but the mobile phase condition for Ni(II) ion determination was 22.5% MeCN of pH 7.20. Detection limit(D.L., S/N=3) of Co(II) and Ni(II) ions were $2.0{\times}10{-7}$ M(14.9 ppb) and $1.0{\times}10{-6}$ M(59.2 ppb), respectively.

• Korean Journal of Materials Research
• /
• v.17 no.5
• /
• pp.256-262
• /
• 2007

Effects of interlayer and the combination of different coating methods on the mechanical and corrosion behaviors of TiN and CrN coated on 420 stainless steel have been studied. STS 420 specimen were tempered at $300^{\circ}C$ for 1 hr in vacuum furnace. The TiN and CrN thin film with 2 ${\mu}m$ thickness were coated by arc ion plating and DC magnetron sputtering following the formation of interlayer for pure titanium and chromium with 0.2 ${\mu}m$ thickness. The microstructure and surface analysis of the specimen were conducted by using SEM, XRD and roughness tester. Mechanical properties such as hardness and adhesion also were examined. XRD patterns of TiN thin films showed that preferred TiN (111) orientation was observed. The peaks of CrN (111) and $Cr_2N$ (300) were only observed in CrN thin films deposited by arc ion plating. Both TiN and CrN deposited by arc ion plating had the higher adhesion and hardness compared to those formed by magnetron sputtering. The specimen of TiN and CrN on which interlayer deposited by magnetron sputtering and thin film deposited by arc ion plating had the highest adhesion with 22.2 N and 19.2 N. respectively. TiN and CrN samples shown the most noble corrosion potentials when the interlayers were deposited by using magnetron sputtering and the metal nitrides were deposited by using arc ion plating. The most noble corrosion potentials of TiN and CrN were found to be approximately -170 and -70 mV， respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.3
• /
• pp.209-220
• /
• 2015

The aim of this study was leaching valuable metal ions from mine waste rocks which were abandoned mine site using indigenous aerobic bacteria. In order to tolerate the the indigenous aerobic bacteria to the heavy metal ions they were repeatedly adapted in $CuSO_4{\cdot}5H_2O$ environment. As the repeated generation-adaptation progressed, the pH values of the growth-medium were gradually decreased. During bio-leaching experiments with indigenous aerobic bacteria raised in a heavy metal ion environment for 42 days, the pH of the leaching solution was decreased while increasing the adaptation period. The indigeous bacteria were much more active on the surface of Younhwa waste rocks which contained relatively few the chalcopyrite and Cu content than the Goseong mine waste rocks, and also the amount of Cu and Fe ions were leached more in the Younhwa sample(leaching rate of 92.79% and 55.88%, respectively) than the Goseong sample(leaching rate of 66.77% and 21.83%, respectively). Accordingly, it is confirmed that valuable metal ions can be leached from the mine waste rocks, if any indigenous bacteria which inhabits a mine environment site for a long time with heavy metal ions can be used, and these bacteria can be progressively adapted in the growth-solutions containing the target heavy metals.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.33-42
• /
• 2000

Adsorption onto the surfaces of solid particles is a well known phenomenon that causes the retardation effect of heavy metals in soils. For adequate remediation of soil and groundwater contamination, it is important to investigate the mobility of heavy metals that largely depends on pH conditions in the soil water since adsorption of heavy metals is pH-dependent. In this study, we investigated the transport of Zn ion under various pH conditions in a sandy soil by conducting batch and column tests. The batch test was performed using the standard procedure of equilibrating fine fractions collected from the soil with eleven different initial $ZnCl_2$ concentrations, and analysis of Zn ion in the equilibrated solutions using ICP-AES. The column test consisted of monitoring the concentrations of soil solutions exiting the soil column with time known as a breakthrough curve (BTC). We injected respectively $ZnCl_2$ and KCl solutions with the concentration of 10 g/L as a tracer in a square pulse type under three different pH conditions (7.7, 5.8, 4.1) and monitored the flux concentration at the exit boundary using an EC meter and ICP-AES. The resident concentration was also monitored at the 10cm-depth by Time Domain Reflectometry (TDR). The results of batch test showed that ion exchange process between Zn and other cations (Ca, Mg) was predominant. The retardation coefficients obtained from adsorption isotherms (Linear, Freundlich, Langmuir) resulted in the various values ranging from 1.2 to 614.1. No retardation effect but ion exchange was found for the BTCs under all pH conditions. This can be explained by the absence of other cations to desorb Zn ion from soil exchange sites under the conditions of ETC experiment imposing blank water as leachate in steady-state flow. As pH decreased, the peak concentration of Zn increased due to the competition of Zn with hydrogen ions ($H^+$) and the concentrations of other cations decreased. The peak concentration of Zn was increased by 12.7 times as pH decreased from 7.7 to 4.1.

• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.352-360
• /
• 2008

The extraction yield and storage stability of Codium fragile pigments extracted in acetone, ethanol or methanol were studied. Methanol was the most effective solvent for pigment extraction, providing an extraction yield of $25.0{\pm}2.10\;mg/g$ (my base). As shown by TLC and HPLC analysis, chlorophyll a(0.40 mg/g) and chlorophyll b(1.94 mg/g) were the major pigment components in dried Codium fragile. The total chlorophyll content of Codium fragile stored a 40C in light or dark conditions for 30 weeks remained at 23.2% and 58.4% respectively. The effect of metal ions ($Cu^{++}$, $Zn^{++}$, $Fe^{++}$ and $Mg^{++}$) on pigment stability was analyzed Among the four metal ions $Cu^{++}$ was the most effective stabilizer of Codium fragile pigments during storage, and $Zn^{++}$ ion was the second most effective. In the presence of 1 mM $Cu^{++}$, the total chlorophyll retained in Codium fragile stored at 40C in light or dark conditions was increased to 47.0% and 88.8% after 30 weeks storage, respectively. The optimum concentrations of $Zn^{++}$ and $Cu^{++}$ for pigment stabilization under dark conditions were 0.5 mM and 0.1 mM, respectively.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.119-124
• /
• 2013

Generally, the characteristic of nanofiltration membranes were catagorized into charged membrane, sieve effect, interaction between membarnes and target solutes. This study aims to investigate the effect item of heavy metal separation with view of charge nanofiltration membranes. The experiments of nanofiltration were conducted by nanofiltration set-up with operational pressure of 0.24 MPa at $25^{\circ}C$ by using synthetic wastewater containing 0.1mg/L of Cr, Fe, Cu, Zn, As, Sn, Pb. Nanofiltration membranes rejected heavy metals much better than chloride, sulfate and TOC, of which concentration in synthetic wastewater was higher than that of heavy metals. To consider rejection characteristics of various metals by nanofiltration membranes, separation coefficient, which is the molar conductivity ratio of the metal permeation rate to the chloride ion or TOC permeation rate, was introduced. In spite of different materials and different nominal salt rejection of nanofiltration membrane used, the separation coefficients of metals were nearly the same. These phenomena were observed in the relationship between the molar conductivity and the separation coefficient for heavy metals.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.855-864
• /
• 2009

The effect of toxicant on the inhibition of nitrification was investigated, using concentrated nitrifying bacteria of both attached and suspended growth. This nitrifying organism was originally obtained from the activated sludge of sewage treatment plant and cultivated for more than three months. The object of this experiment is to determine the effect of the specific surface area and the growth condition of nitrifying bacteria on toxicity of heavy metal. The results of this study were as follows. The specific surface area of both attached and suspended growth of nitrifying organism was proven to be a major factors in determining the inhibition of nitrification of heavy metal such as $Cu^{++}$ion. When the condition of attachment and detachment was compared in an experiment using attached growth nitrifier, the effect on toxicant was 1.12 times less in attached condition than in detached condition for Nitrosomonas, and 1.09 times less for Nitrobacter. In case of suspended growth nitrifier, the effect on toxicant was 1.46 times less in non-ground condition than in ground condition for Nitrosomonas, and 1.35 times less for Nitrobacter. Also, similar results were obtained in a set of experiments, without adding nitrite to the substrate. In an experiment that compared attached condition using attached growth nitrifier with detached condition using attached growth nitrifier, the effect on toxicant was 1.83 times less in attached condition than in detached one for Nitrosomonas, and 1.78 times less for Nitrobacter. In case of suspended growth nitrifier, the effect on toxicant was 1.27 times less in non-ground condition than in ground condition for Nitrosomonas, and 1.32 times less for Nitrobacter.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.429-437
• /
• 2018

In this study, the mixed toxicity of heavy metals (Cu, Pb, Hg) and surfactants (SLS, ALS) was evaluated by using Vibrio fischeri and Daphnia magna. The sensitivity of ecotoxicity to heavy metals was sensitive to daphnia but the case of surfactants were more sensitive to Vibrio fischeri. Experimental results of Vibrio fischeri show that the toxicity value P(O) was lower than the predicted value P(E), and the antagonistic effect was observed when the heavy metal and the surfactant were mixed. It seems that SLS and ALS, which are anionic surfactants, have anionic form on the hydrophilic head, so that they have an antagonistic effect that they are bonded with heavy metal ion which is a cation type and the actual toxicity is lowered. In Daphnia magna, the results showed that antagonistic, additive and synergistic effects were in order as concentrations increased. As the concentration increases, Daphnia magna, which is highly sensitive to heavy metals, seems to have a synergistic effect with a rapid increase in mortality.