• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.265-268
• /
• 2000

We fabricated an IMI-O polymer containing an imidazole group that could form a complex structure between the monolayer and the metal ions at the air-water interface. Also. the monolayer behavior at the air-water interface and the surface morphology of metal-complexed Langmuir-Blodgett(LB) films were investigated by using Brewster angle microscopy(BAM) and Scanning Maxwell-stress Microscopy(SMM). The difference in the BAM and SMM images between the pure water and the aqueous metal ions is attributed to the interactions of the copolymers with the metal ions at the interface and the consequent change of the monolayer organization.

• 한국재료학회지
• /
• 제10권2호
• /
• pp.171-174
• /
• 2000

본 연구에서는 실리콘 wafer위에 sputtering방법으로 진공증착된 CoNbZr 비정질 박막을 Nd:YAG 레이저로 식각하기 위한 실험을 했는데, 금속의 경우 표면에서 빛의 반사율이 매우 크기 때문에 파장이 $1.06{\mu\textrm{m}}$인 Nd:YAG 레이저의 에너지를 흡수하는 것이 매우 어려우므로 식각이 거의 이루어지지 않았다. 그래서 이러한 문제를 해결하기 위한 새로운 시도로서 본 연구에서는 빛의 흡수율이 좋은 검은색의 polymer막을 금속박막의 표면에 도포하고 이 polymer막 위에 레이저를 조사해서 금속박막의 식각하는 실험을 실시하였다. 기존의 방법으로는 laser power가 332W나 되는데도 식각이 거의 일어나지 않았지만 본 연구의 방법을 이용했을 때는 laser power가 114W로 1/3정도 밖에 안 되는데도 레이저 식각이 비교적 양호하게 이루어졌다. 이는 검은색의 polymer층이 Nd:YAG 레이저 에너지의 흡수 및 전달 층의 역할을 하기 때문인 것으로 생각된다.

• Journal of information and communication convergence engineering
• /
• 제1권3호
• /
• pp.133-138
• /
• 2003

The preparation of $Al_{2}O_{3}-SiO_{2}$ thin films from less than one micron to several tens of microns in thickness had been prepared from metal alkoxide sols. Two methods, dip-withdrawal and electrophoretic deposition, were employed for thin films and sheets formation. The requirements to be satisfied by the solution for preparing uniform and strong films and by the factors affecting thickness and other properties of the films were examined. For the preparation of thin, continuous $Al_{2}O_{3}-SiO_{2}$ films, therefore, metal-organic-derived precursor solutions contained Si and Al in a chemically polymerized form has been developed and produced in a clear liquid state. In the process of applying to substrates, this liquid left a transparent, continuous film that could be converted to crystalline $Al_{2}O_{3}-SiO_{2}$ upon heating to $1000^{\circ}C$. And, a significant change of the film density took place in the crystallization process, thus leading to the strict requirements as to the film thickness, which could survive crystallization.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.761-763
• /
• 2001

Dendrimers represent a new class of synthetic macromolecules characterized by a regularly branched treelike structure. Dendrimer can be made with high regularity and controlled molecular weight. Peculiar features of the dendritic geometry are the large number of end groups as well as the shape persistence in higher generations, approaching spherical geometry. One of the most peculiar characteristics of dendritic macromolecules is their controlled molecular structure and orientation, which means that they have a practical application in achieving a highly organized molecular arrangement. We attempted to fabricate a G4-48PyA dendrimer LB films containing 48 pyridinealdoxime functional end group that could form a complex structure with metal ions. Also, we investigated the surface activity of dendrimer films at air-water interface. And we have studied the electrical properties of the ultra-thin dendrimer LB films. The electrical properties of the ultra-thin dendrimer LB films were investigated by studying the current-voltage(I-V) characteristics of metal/dendrimer LB films/metal (MIM) structure. And rectifying behavior of the devices was occurred in applied field.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.957-962
• /
• 2003

The preparation of $Al_2$O$_3$-SiO$_2$ thin films from less than one micron to several tens of microns in thickness had been prepared from metal alkoxide sols. Two methods, dip-withdrawal and electrophoretic deposition, were employed for thin films and sheets formation. The requirements to be satisfied by the solution for preparing uniform and strong films and by the factors affecting thickness and other properties of the films were examined. for the preparation of thin, continuous $Al_2$O$_3$-SiO$_2$ films, therefore, metal-organic-derived precursor solutions contained Si and Al in a chemically polymerized form has been developed and produced in a clear liquid state. In the process of applying to substrates, this liquid left a transparent, continuous film that could be converted to crystalline $Al_2$O$_3$-SiO$_2$ upon heating to 100$0^{\circ}C$. And, a significant change of the film density took place in the crystallization process, thus leading to the strict requirements as to the film thickness, which could survive crystallization.

• 한국세라믹학회지
• /
• 제33권9호
• /
• pp.969-976
• /
• 1996

RuO2 thin films were deposited on SiO2(1000 $\AA$)/Si by hot-wall Metal Organic Chemical Vapor Depositon. The crystallinity of RuO2 thin films increased with increasing deposition temperature and the preferred orienta-tion of RuO2 films converted (200) plane to (101) plane with increasing film thicknesses. Such a change in preferred orientation was influenced on the crystallographic structure and the residual stress of RuO2 thin films. The resistivity of the 2700$\AA$-thick RuO2 thin films deposted at 30$0^{\circ}C$ was 52.7$\mu$$\Omega$-cm and they could be applicable to bottom electrodes of high dielectric materials. However the resistivity of RuO2 thin films increased with decreasing film thicknesses. The grain size and the resistivity of RuO2 thin films were densified with increasing the annealing temperature and showed the decrease of resistivity.

• 한국표면공학회지
• /
• 제48권2호
• /
• pp.38-42
• /
• 2015

Atomic layer deposition (ALD) is essential for the fabrication of nanoscale electronic devices because it has excellent conformality, atomic scale thickness control, and large area uniformity. Metal thin films are one of the important material components for electronic devices as a conductor. As the size of electronic devices shrinks, the thickness of metal thin films is decreased down to few nanometers, and the metal films become non-continuous due to inherent island growth of metal below a critical thickness. So, fabrication of continuous metal thin films by ALD is fundamentally and practically important. Since ALD films are grown through self-saturated reactions between precursors on surface, initial growth characteristics significantly depend on the surface properties and the selection of precursors. In this work, we investigated ALD Pt on $TiO_2$ substrate by using trimethyl-methyl-cyclopentadienyl-Platinum ($MeCpPtMe_3$) precursor and $O_3$ reactant. By using $O_3$ instead of $O_2$, initial nucleation rate of ALD Pt was increased on $TiO_2$ surface, resulting in formation of continuous thin Pt films. Morphologies of ALD Pt on $TiO_2$ were characterized by using Scanning Electron Microscope (SEM) and Energy-Dispersive X-ray Spectroscopy (EDS). Crystallinity of ALD Pt on $TiO_2$ correlated with its growth characteristics was analyzed by X-Ray Diffraction (XRD).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.73-73
• /
• 1999

A large area negative metal ion beam source is developed. Kinetic ion beam of the incident metal ions yields a whole nucleation and growth phenomena compared to the conventional thin film deposition processes. At the initial deposition step one can engineer the surface and interface by tuning the energy of the incident metal ion beams. Smoothness and shallow implantation can be tailored according to the desired application process. Surface chemistry and nucleation process is also controlled by the energy of the direct metal ion beams. Each individual metal ion beams with specific energy undergoes super-thermodynamic reactions and nucleation. degree of formation of tetrahedral Sp3 carbon films and beta-carbon nitride directly depends on the energy of the ion beams. Grain size and formation of polycrystalline Si, at temperatures lower than 500deg. C is obtained and controlled by the energy of the incident Si-ion beams. The large area metal ion source combines the advantages of those magnetron sputter and SKIONs prior cesium activated metal ion source. The ion beam source produces uniform amorphous diamond films over 6 diameter. The films are now investigated for applications such as field emission display emitter materials, protective coatings for computer hard disk and head, and other protective optical coatings. The performance of the ion beam source and recent applications will be presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1618-1620
• /
• 2004

The $Pb(Zr_{0.4}Ti_{0.6})O_3/Pb(Zr_{0.6}Ti_{0.4})O_3$ [PZT(4060)/(6040)] multilayered thin films were deposited by RF Sputtering method on the Pt/Ti/$SiO_2$/Si substrate. This procedure was repeated several times to form PZT(4060)/(6040) heterolayerd thin films. The effects on the structural and dielectric properties of PZT multilayered thin films were investigated. The MFM(Metal Ferroelectric Metal) type capacitors were made using the PZT(4060)/(6040) multilayered thin films deposited with optimum deposition condition. An enhanced dielectric property was observed in the PZT(4060)/(6040) multilayered thin films. The relative dielectric constant and dielectric loss at 100Hz of the PZT(4060)/(6040)-5 multilayered thin films were about 1106 and 0.016, respectively.

• 한국세라믹학회지
• /
• 제35권9호
• /
• pp.969-973
• /
• 1998

Pb(Zr, Ti)O3 (PZT) (Zr:Ti= 52: 48) thin films were prepared on MgO(100) substrates by dipping-py-rolysis process using metal naphthenates as starting materials. Thin films were fabricated by spin coating technique and the precursor films were prefired at 20$0^{\circ}C$ in air for 0.5, 1, 2, 3, and 24 h followed by final heat treatment at 75$0^{\circ}C$ for 30min. Film prefired for 24 h lost orientational properties and pole figure analysis showed the lost of the epitaxial relationship between the films and substrate while highly a/c-axis oriented thin films were obtained for the samples prefired for 1, 2, and 3h.