• 분석과학
• /
• 제8권4호
• /
• pp.675-682
• /
• 1995

Thin films of buckminsterfullerene($C_{60}$) formed by solution drop casting on Pt foil electrode surfaces were studied by cyclic voltammetry(CV) in acetonitrile(MeCN) containing quaternary ammonium or alkali-metal salts as supporting electrolyte. The electrochemical behaviors of $C_{60}$ films are found to be strongly dependent on the nature of the supporting electrolytes, especially with tetrabutyl ammonium perchlorate (TBAP, $NBu_4ClO_4$), and tetrabutyl ammonium tetrafluoroborate ($TBABF_4$, $NBu_4BF_4$). Reasonably stable films are formed into which electrons can be injected. The interaction of $C_{60}$ film with the quaternary ammonium cation may produce the fulleride salts $(TBA^+)(C{_{60}}^-)$ and $(TBA^+)_2(C{_{60}}^{2-})$. The bulk electroreduction with a controlled potential to generate the soluble $C{_{60}}^{3-}$ anions(dark red-brown color) is followed by electrooxidative deposition to produce a neutral $C_{60}$ film on the surface. The peak currents($I_{pc}$ and $I_{pa}$) of these thin film were dramatically decreased with repetitive potential scanning. These results could be explained by the adsorption-desorption phenomena and ion pairing interaction of reduced species($C{_{60}}^-$, and $C{_{60}}^{2-}$) onto the electrode surface. The peak current changes and peak potential shifts of the thin $C_{60}$ film in cyclic voltammograms formed from solution were observed by varying scan rates.

• 자원환경지질
• /
• 제24권2호
• /
• pp.107-129
• /
• 1991

The Yonghwa gold-silver deposits are emplaced along $N15^{\circ}{\sim}25^{\circ}W$ trending fissures in middle Cretaceous porphyritic granite or Precambrian Sobaegsan gneiss complex. The results of paragenetic studies suggest that vein filling can be subdivided into four identifiable stages; state I: the main sulfide stage, characterized by base-metal sulfide minerals, iron oxides and minor electrum, stage II: electrum stage, stage III: electrum and silver-bearing sulfosalts stage, stage IV: post ore stage of carbonates and quartz. The ore mineralogy suggests that depositional temperature of the formation of the gold and silver minerals are estimated as 200 to $250^{\circ}C$ and 140 to $180^{\circ}C$, respectively. Sulfur fugacity of the formation of the gold and silver minerals are estimated as $10^{-14.0}$ to $10^{-12.2}$ atm and $10^{-18.5}$ to $10^{-17.2}$ atm, respectively. A consideration of the pressure regime during ore deposition bases on the fluid inclusion evidence of boiling suggests lithostatic pressure of less than 180 bars. This range of pressure indicate that vein system lay at depth of 700m below the surface at the time during mineralization. Salinities of ore-bearing fluids range from 0.4 to 6.9 wt.% equivalent NaCl. The sulfur and carbon isotopic data reveal that these elements were probably derived from a deep-seated source. The ${\delta}^{18}O$ of the hydrothermal fluid was determined from ${\delta}^{18}O$ values of quartz and calcite. Oxygen and hydrogen isotopic studies reveal that meteoric water dominate over ore-bearing fluid.

• 공업화학
• /
• 제10권2호
• /
• pp.225-230
• /
• 1999

Li(DPM)을 원료로 hot wall 수평 관형 반응기를 이용하여 질소-산소 및 아르곤-산소의 분위기에서 $Li_2O$ 고체박막을 LPMOCVD법으로 합성하였다. XRD와 ESCA 분석으로부터 질소-산소 분위기에서는 $Li_2CO_3$막이, 아르곤-산소의 분위기에서는 $Li_2O$막이 성장하였음을 알아냈다. 성막된 산화리튬과 리튬카보네이트는 기판의 실리콘 성분과 반응하여 실리케이트를 형성하였다. 마이크로 trench법과 Monte Carlo 시뮬레이션에 의해 기상반응 속도상수 및 표면반응 속도상수가 얻어졌으며 이를 이용한 성막속도 계산치와 실험치를 비교한 결과 실험조건범위 내에서 잘 일치하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.101-101
• /
• 2018

Quantitative measurement of chloride ion concentration has an important role in various fields of electrochemistry, medical science, biology, metallurgy, architecture, etc. Among them, its importance of architecture is ever-growing due to unexpected degradations of building structure. These situations are caused by corrosion of reinforced concrete (RC) structure of buildings. And chloride ions are the most powerful factors of RC structure corrosion. Therefore, precise inspection of chloride ion concentration must be required to increase the accuracy of durability monitoring. Multi-walled Carbon nanotubes (MWCNTs) have high chemical resistivity, large surface area and superior electrical property. Thus, it is suitable for the channels of electrical signals made by the sensor. Silver nanoparticles were added to giving the sensing property. CuBTC, one of the metal organic frameworks (MOFs), was employed as a material to improve the sensing property because of its hydrophilicity and high surface area to volume ratio. In this study, sensing element was synthesized by various chemical reaction procedures. At first, MWCNTs were functionalized with a mixture of sulfuric acid and nitric acid because of enhancement of solubility in solution and surface activation. And functionalized MWCNTs, silver nanoparticles, and CuBTC were synthesized on PTFE membrane, one by one. Electroless deposition process was performed to deposit the silver nanoparticles. CuBTC was produced by room temperature synthesis. Surface morphology and composition analysis were characterized by scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), respectively. X-ray photoelectron spectroscopy (XPS) was also performed to confirm the existence of sensing materials. The electrical properties of sensor were measured by semiconductor analyzer. The chloride ion sensing characteristics were confirmed with the variation of the resistance at 1 V.

• The Journal of Advanced Prosthodontics
• /
• 제6권6호
• /
• pp.512-520
• /
• 2014

PURPOSE. The purpose of this study was to assess the surface characteristics and the biocompatibility of zirconium (Zr) coating on Ti-6Al-4V alloy surface by radio frequency (RF) magnetron sputtering method. MATERIALS AND METHODS. The zirconium films were developed on Ti-6Al-4V discs using RF magnetron sputtering method. Surface profile, surface composition, surface roughness and surface energy were evaluated. Electrochemical test was performed to evaluate the corrosion behavior. Cell proliferation, alkaline phosphatase (ALP) activity and gene expression of mineralized matrix markers were measured. RESULTS. SEM and EDS analysis showed that zirconium deposition was performed successfully on Ti-6Al-4V alloy substrate. Ti-6Al-4V group and Zr-coating group showed no significant difference in surface roughness (P>.05). Surface energy was significantly higher in Zr-coating group than in Ti-6Al-4V group (P<.05). No difference in cell morphology was observed between Ti-6Al-4V group and Zr-coating group. Cell proliferation was higher in Zr-coating group than Ti-6Al-4V group at 1, 3 and 5 days (P<.05). Zr-coating group showed higher ALP activity level than Ti-6Al-4V group (P<.05). The mRNA expressions of bone sialoprotein (BSP) and osteocalcin (OCN) on Zr-coating group increased approximately 1.2-fold and 2.1-fold respectively, compared to that of Ti-6Al-4V group. CONCLUSION. These results suggest that zirconium coating on Ti-6Al-4V alloy could enhance the early osteoblast responses. This property could make non-toxic metal coatings on Ti-6Al-4V alloy suitable for orthopedic and dental implants.

• The Journal of Advanced Prosthodontics
• /
• 제6권6호
• /
• pp.498-504
• /
• 2014

PURPOSE. Dental implant has gained clinical success over last decade with the major drawback related to osseointegration as properties of metal (Titanium) are different from human bone. Currently implant procedures include endosseous type of dental implants with nanoscale surface characteristics. The objective of this review article is to summarize the role of nanotopography on titanium dental implant surfaces in order to improve osseointegration and various techniques that can generate nanoscale topographic features to titanium implants. MATERIALS AND METHODS. A systematic electronic search of English language peer reviewed dental literature was performed for articles published between December 1987 to January 2012. Search was conducted in Medline, PubMed and Google scholar supplemented by hand searching of selected journals. 101 articles were assigned to full text analysis. Articles were selected according to inclusion and exclusion criterion. All articles were screened according to inclusion standard. 39 articles were included in the analysis. RESULTS. Out of 39 studies, seven studies demonstrated that bone implant contact increases with increase in surface roughness. Five studies showed comparative evaluation of techniques producing microtopography and nanotopography. Eight studies concluded that osteoblasts preferably adhere to nano structure as compared to smooth surface. Six studies illustrated that nanotopography modify implant surface and their properties. Thirteen studies described techniques to produce nano roughness. CONCLUSION. Modification of dental osseous implants at nanoscale level produced by various techniques can alter biological responses that may improve osseointegration and dental implant procedures.

• 대한화학회지
• /
• 제47권6호
• /
• pp.608-613
• /
• 2003

Post-Oxide CMP(Chemical-Mechanical Polishing) 결과 실리콘 웨이퍼를 오염 시키고 있는 슬러리 입자의 세정 가능성을 조사하기 위하여DHF(Diluted HF)에 비이온성 계면 활성제인 PAAE(Polyoxyethylene Alkyl Aryl Ether), 비양성자성 용제인 DMSO(Dimethylsulfoxide) 와 초순수의 혼합물인 새로운 세정액을 제조하였다. 세정력을 평가하기 위해서 세정제 내에서 각각 다른 제타 포텐셜을 갖는 실리카($SiO_2$), 알루미나($Al_2O_3$)와 PSL(polystylene latex) 입자를 실리콘 웨이퍼 표면의 산화막에 인위적으로 오염시킨 후 실험에 이용하였다. 초음파하에서 세정액의 성능 평가 결과 본 세정기술은 효과적인 입자의 세정능력과 금속이온에 대한 세정 능력을 나타내고 있음을 확인하였다. 즉 기존의 APM($NH_4OH,\;H_2O_2$와 D.I.W의 혼합물)과 달리 상온에서 세정이 가능하고 세정과정이 단축 되었으며, 낮은 농도의 HF를 사용함으로써 최소의 에칭에 의하여 표면 거칠기를 감소시킬 수 있음을 보여주고 있다. 또한 주요 CMP 금속 배선 물질들에 대한 낮은 부식력으로 기존의 CMP 후 세정공정에 뿐만 아니라 차세대CMP 공정으로 각광 받고 있는 Copper CMP 에 대한 Brush 세정 공정의 보조 세정제로 본 세정제가 적용될 가능성이 있음을 확인하였다.

• 한국광학회지
• /
• 제18권1호
• /
• pp.50-55
• /
• 2007

본 연구에서는 광통신 시스템에 있어서 필수적인 기능으로 전망되고 있는 전광 논리소자를 구현하기 위한 집적된 광소자를 제작, 측정 하였다. 유기금속화학증착법(MOCVD)을 이용한 선택영역 성장기술을 이용하여 서로 다른 두 활성영역을 한 기판위에 성장함으로써 능동 반도체 광소자인 반도체 광증폭기와 수동 반도체 광소자인 다중모드 간섭 도파로, S-자 도파로를 집적하였다. 집적된 수동 소자부분의 손실을 측정하고 전광 논리소자를 구현하는 방법 중 하나인 반도체 광증폭기의 cross-gain modulation(XGM)특성을 측정하여 집적된 전광 논리소자로의 사용 가능성을 알아보았다.

• 한국표면공학회지
• /
• 제39권3호
• /
• pp.105-109
• /
• 2006

The effects of negative carbon ion beam energy on the bonding configuration, hardness and surface roughness of DLC film prepared by a direct metal ion beam deposition system were investigated. As the negative carbon ion beam energy increased from 25 to 150 eV, the $sp^3$ fraction of DLC films was increased from 32 to 67%, while the surface roughness was decreased. The films prepared at 150 eV showed the more flat surface morphology of the film than that of the film prepared under another ion beam energy conditions. Surface roughness of DLC film varied from 0.62 to 0.22 nm with depositing carbon ion beam energy. Surface nano-hardness increased from 12 to 57 Gpa when increasing the negative carbon ion beam energy from 25 to 150 eV, and then decreased when increasing the ion beam energy from 150 to 200 eV.

• 전기화학회지
• /
• 제3권3호
• /
• pp.178-181
• /
• 2000

본 실험에서는 리튬 이차 박막전지의 음극물질로 주석 산화물 박막을 RF magnetron sputter을 이용하여 증착하였다. RF power와 공정 압력을 각각 $2.5W/cm^2$와 10mTorr로 고정시키고 박막 중의 산소량을 조절하기 위해 산소 분압을 $0\~100\%$까지 조절하여 실험하였으며, 산소량을 더 줄이기 위해 주석 금속 칩을 사용하여 조절하였다. 산소량을 줄여 줌으로써 비가역적으로 형성되는 리튬산화물의 량을 줄이고 고용량의 $SnO_x$음극 박막을 제조하였다. 그 중 $SnO_{1.43}$일 때 가장 큰 가역용량(약$ 500{\mu}Ah/cm^2{\mu}m$) 얻었다.