• Analytical Science and Technology
• /
• v.11 no.6
• /
• pp.440-447
• /
• 1998

Polydentate Schiff base ligands 5-Br-BSDT(bis(5-bromosalicylaldehyde)diethylenetriamine) having $N_3O_2$ atoms, 5-Br-BSTT(bis(5-bromosalicylaldehyde)triethylenetetramine) having $N_3O_2$ atoms, 5-Br-BSTP(bis(5-bromosalicylaldehyde)tetraethylenepentamine) having $N_3O_2$ atoms were synthesized. Stability constants of the complexes between these ligands and the metal ions such as Cu(II), Ni(II) and Zn(II) were measured in DMSO by a polarographic method. It was observed that all metal(II) ions employed in this study formed 1 : 1 complexes with Schiff base ligands. Stability constants for the ligands were in the order of Cu(II)>Ni(II)>Zn(II), and for complex formation were in the order of 5-Br-BSTP>5-Br-BSTT>5-Br-BSDT according to the increasing in the number of donor atoms. Both enthalpy and entropy changes are obtained in negative valves. Exothermicity for the complex formation indicated tight binding between the ligands and metal ions. The negative entropy change would be related to the fact that solvent molecules are strongly interacting with the metal complexes.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1633-1637
• /
• 2010

The UV-vis absorption spectrum of protoporphyrin IX shows a very sharp and strong absorption maximum peak at 398 nm in acetonitrile-water mixture solution (1:1 v/v). When divalent metal ions such as $Cu^{2+}$, $Zn^{2+}$, and $Ca^{2+}$ ion were added to protoporphyrin IX, metal protoporphyrin IX complexes were thereby produced. Cu-protoporphyrin IX complexes have the largest formation constant ($K_f$) among them. The fluorescence intensity of protoporphyrin IX was diminished by the presence of $Cu^{2+}$, $Zn^{2+}$, $Ca^{2+}$, $Mn^{2+}$, and $Ni^{2+}$ ions as quenchers. However, $Mg^{2+}$, $Mn^{2+}$, and $Ni^{2+}$ ions are hardly combined with protoporphyrin IX. $Mg^{2+}$ ion does not take part in the fluorescence quenching process of protoporphyrin IX in acetonitrile-water mixture solution. According to the Stern-Volmer plots, fluorescence quenching by $Cu^{2+}$, $Zn^{2+}$, and $Ca^{2+}$ ions involves static quenching, which is due to complex formation. On the contrary, dynamic quenching has a large influence on the overall quenching process, when $Mn^{2+}$ and $Ni^{2+}$ ions were added to protoporphyrin IX in acetonitrile-water mixture solution.

• Journal of the Mineralogical Society of Korea
• /
• v.11 no.1
• /
• pp.20-31
• /
• 1998

Adsorption of metal elements onto illite and halloysite was investigated at $25^{\circ}C$ using pollutant water collected from the gold-bearing metal mine. Incipient solution of pH 3.19 was reacted with clay minerals as a function of time: 10 minute, 30 minute, 1 hour, 12 hour, 24 hour, 1 day, 2 day, 1 week, and 2 week. Twenty-seven cations and six anions from solutions were analyzed by AAs (atomic absorption spectrometer), ICP(induced-coupled plasma), and IC (ion chromatography). Speciation and saturation index of solutions were calculated by WATEQ4F and MINTEQA2 codes, indicating that most of metal ions exist as free ions and that there is little difference in chemical species and relative abundances between initial solution and reacted solutions. The adsorption results showed that the adsorption extent of elements varies depending on mineral types and reaction time. As for illite, adsorption after 1 hour-reaction occurs in the order of As>Pb>Ge>Li>Co, Pb, Cr, Ba>Cs for trace elements and Fe>K>Na>Mn>Al>Ca>Si for major elements, respectively. As for halloysite, adsorption after 1 hour-reaction occurs in the order of Cu>Pb>Li>Ge>Cr>Zn>As>Ba>Ti>Cd>Co for trace elements and Fe>K>Mn>Ca>Al>Na>Si for major elements, respectively. After 2 week-reaction, the adsorption occurs in the order of Cu>As>Zn>Li>Ge>Co>Ti>Ba>Ni>Pb>Cr>Cd>Se for trace elements and Fe>K>Mn>Al, Mg>Ca>Na, Si for major elements, respectively. No significant adsorption as well as selectivity was found for anions. Although halloysite has a 1:1 layer structure, its capacity of adsorption is greater than that of illite with 2:1 structure, probably due to its peculiar mineralogical characteristics. According to FTIR (Fourier transform infrared spectroscopy) results, there was no shift in the OH-stretching bond for illite, but the ν1 bond at 3695 cm-1 for halloysite was found to be stronger. In the viewpoint of adsorption, illite is characterized by an inner-sphere complex, whereas halloysite by an outer-sphere complex, respectively. Initial ion activity and dissociation constant of metal elements are regarded as the main factors that control the adsorption behaviors in a natural system containing multicomponents at the acidic condition.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.511-517
• /
• 2002

The complex 1 $([Cp*Fe(CO)_2]_2-(\mu-CH=CH-CH=CH))$ which have butadiene as a bridge were synthesized from $Cp*(CO)_2FeK$ and cis-3,4-dichlorocyclobutene. The derivatives of complex 1 where one or two carbonyl groups are replaced by phosphine ligands have been prepared by photochemical substitution. The new derivatives $([Cp*Fe(L)_2]_2-(\mu-CH=CH-CH=CH))$ where L = $(Ph_2PCH_2CH_2PPh_2)$ and $([Cp*Fe(CO)(L)]_2-(\mu-CH=CH-CH=CH))$ where L : $PPh_3$ have been characterized from $^^1H-$, $^^13C-$,$^^31P-NMR$ and elemental analysis. Obtained complexes have been studied in electrochemical experiment and UV/VIS-near-IR. The mixed-valence radical cation forms of complex 2, 3 species were found to be delocalized as the Class III. Based on the separation of the waves ($\triangle E$ : 0.470 ~ 0.605 V), the efficiency of electronic communication between two metal centers of cation species leading to stabilization relative to neutral species. The phosphine-substitute complexes (2, 3) displays two reversible oxidation waves and oxidation state of metal centers-dependent color change, electrochromism, was observed from yellow to orange and deep blue in methylene chloride.

• Korean Journal of Materials Research
• /
• v.22 no.3
• /
• pp.159-167
• /
• 2012

Hydrogen is in the spotlight as an alternative next generation energy source for the replacement of fossil fuels because it has high specific energy density and emits almost no pollution, with zero $CO_2$ emission. In order to use hydrogen safely, reliable storage and transportation methods are required. Recently, solid hydrogen storage systems using metal hydrides have been under extensive development for application to fuel cell vehicles and fuel cells of MCFC and SOFC. For the practical use of hydrogen on a commercial basis, hydrogen storage materials should satisfy several requirements such as 1) hydrogen storage capacity of more than 6.5wt.% $H_2$, moderate hydrogen release temperature below $100^{\circ}C$, 3) cyclic reversibility of hydrogen absorption/desorption, 4) non toxicity and low price. Among the candidate materials, Li based metal hydrides are known to be promising materials with high practical potential in view of the above requirements. This paper reviews the characteristics and recent R&D trends of Li based complex hydrides, Li-alanates, Li-borohydrides, and Li-amides/imides.

• Environmental Analysis Health and Toxicology
• /
• v.25 no.1
• /
• pp.27-40
• /
• 2010

The current study was designed to scientifically evaluate the atmospheric particulate pollution in residences relative to their proximity to a Korean major iron/metal industrial complex (IMIC). This objective was achieved by measuring the concentrations and elemental composition of particulate matter with aerodynamic diameters equal to or less than 10 ${\mu}m$(PM10) in industrial ambient air from IMIC and residential ambient air with relative proximities to IMIC. The trace metals were analyzed using an inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The industrial mean values exceeded the Korean year/70-${\mu}g/m^3$ standard for PM10, whereas the residential mean values did not. However, the maximum residential values did exceed or were close to the Korean PM10 year standard. For individual elements, the ambient concentrations ranged widely from values in the order of a few $ng/m^3$ to thousands of $ng/m^3$. The residential mean mass concentrations in the PM10 measured in the present study were higher than or similar to those reported in earlier studies. This study suggests that residents in neighborhoods near the IMIC are exposedto elevated particulate levels compared to residents living further away from such a source.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.5
• /
• pp.221-224
• /
• 2005

To overcome of poor electron injection in organic light-emitting diodes (OLEDs) with Al cathode, a thin layer of inorganic insulating materials, like as LiF, is inserted between an Al cathode and an organic electron transport layer. Though the device, mentioned above, improves both turn on voltage and luminescent properties, it has some problems like as thickness restriction, less than 2 nm, and difficulty of deposition control. On the other hand, Li organic complex, Liq, is less thickness restrictive and easy to deposit and it also enhances the performance of devices. This paper reports the improved electron injection on OLEDs with another I A group metal complex, Potassium quinolate (Kq), as an electron injection material. OLEDs with organic complexes showed improved turn-on voltage and luminous efficiency which are remarkably improved compared to OLEDs with Al cathode. Especially, OLEDs with Kq have longer life time than OLEDs with Liq.

• Journal of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.30-36
• /
• 1988

The effect of high pressure on the stability of copper(II), cadmium(II) and zinc (II) complex ions with ethylenediamine, propylenediamine, diethylenetriamine has been investigated polarographically. 0.10M KN$O_3$ solution was used as a supporting electrolyte. The concentration of chelating agents was varied from 0.01M to 1.00M. The dissociation constants of metal complex ions were increased with increasing the pressure from 1 atmosphere to 1,500 atmospheres. The increment of the dissociation constant per unit atmosphere varied from 1.1 ${\times} 10^{-3}$% for Cu(dien)$_2^{2+}$ to 5.0 ${\times} 10^{-3}$ % for Zn(en)$_2^{2+}$.

• Korean Journal of Environmental Agriculture
• /
• v.5 no.1
• /
• pp.43-47
• /
• 1986

In order to evaluate the pollution potential of agricultural crops after the construction of Onsan Industrial Complex (non-ferrous metal refineries), concentrations of hazardous heavy metals were analyzed for crop samples (rice, barley, soybean, vegetables and fruits) grown near the Complex in 1978. Although a slight difference was found among the kinds, parts and growing regions of the crops, no definite tendency was observed. The mean/maximum concentrations of crop samples were 0.23/4.0ppm As, 0.4/1.2 ppm Cd, 4.88/12.7ppm Cu, 0.09/0.4 ppm Hg, 3.86/5.0 ppm Pb and 41.3/105 ppm Zn, which may serve as the natural background data for this region.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.197-209
• /
• 2014

환경 오염에 대한 우려의 목소리가 높아지면서 Green chemistry 분야가 각광을 받고 있다. 이 분야에서는 환경에 영향을 적게 미치기 위한 방법의 일환으로 촉매를 연구하며, 그 촉매는 착화합물인 경우가 많다. 그러나 착화합물 내에서 리간드와 금속 이온간의 결합은 예측하기 어렵다. 이는 전형금속보다는 전이금속에서 더욱 심하며, 그 중 한 예로 전이금속에서는 여러 개의 금속 이온이 서로 직접적으로 결합한 채 리간드와 결합하는 착화합물이 발견되기도 한다. 다중 금속 착화합물(Multimetal Complex)로 부르는 이러한 구조는 특유의 복잡함 때문에 잘 알려져 있지 않음에도 불구하고 착화합물의 물리적, 화학적 성질에 직접적으로 영향을 주기에 촉매나 센서, 특히 이를 이용하여 구조체를 만드는 MOF(Metal-Organic Framework) 분야에서는 꼭 알고 있어야 하는 사항이다. 이 연구에서는 GAMESS로 density functional theory (B3LYP functional)를 이용한 양자계산을 수행하여 그 중 가장 간단한 구조인 Dimetal Complex, 그 중에서도 MOF 내에서 많이 발견되는 수차 형태(Paddle wheel) 착화합물에 대해서 다루었다. Cu를 기준으로 그와 비슷한 주기나 족에 있는 Ru, Ag, Zn 등의 금속으로 만든 Paddle wheel 구조의 에너지를 비교하여 Cu가 다른 금속에 비해 이 구조를 안정하게 형성할 수 있는 이유를 알아보았다. 더 나아가 이 구조가 MOF의 형성과 성질에 어떠한 연관성이 있는지 분석함으로써 어떠한 조건이 MOF의 성질을 극대화시킬 수 있는지도 알아보았다.