• Fibers and Polymers
• /
• 제3권1호
• /
• pp.14-17
• /
• 2002

Development of a novel fixed site carrier membrane (FCM), supported by PET fabric for metal ion separation is reported. The membranes were prepared by dipping PET fabric into the methylene chloride solution of Poly(5-vinyl-m-phe-nylene-m'-phenylene-32-crown-10) (P(VCE)), a polymeric metal ion carrier. It was found that the flux of mono-valent metal ion transported across the membrane is signif=cantly differed from each other and the flux decreases in the order $Cs^+$>$Rb^+$>$K^+$>$Na^+$>$Li^+$ irrespective to the anion except perchlorate anion. It was explained in terms of the stability of the complex, formed by crown ether unit of the P(VCE) and the various metal ions, meanwhile, the lower rate of transport in the presence of perchlorate anion was ascribed to its low hydrophilicity.

• International Journal of Contents
• /
• 제4권1호
• /
• pp.1-6
• /
• 2008

Existing improvement measures for resource management are merely concentrating on the document automation only. In addition, such improvements rarely benefit metal millwork management. Following the trend of constructing high rise and multi-complex buildings, the importance of resource management from the aspect of construction project management is being emphasized. Metal work resources are critical most of construction projects, it became a target for special management. Therefore, the study has determined work process of metal work resource management, for the metal millwork is one of the most important construction materials most of construction projects, and proposed a web based module for improving the management task.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1519-1521
• /
• 1997

In this paper, poly (N-(2-4-imidazolyl) ethyl) maleimide-alt-1-octadecene (IMI-O) polymer which can complex metal ion was used to confirm the possibility of molecular device made by Langmuir-Blodgett method. Metal/Insulator/Metal (MIM) device was fabricated for investigation of electric properties. In the ${\pi}$-A isotherm, surface pressure at collapse point was different as to the molecular weight of metal ion complexed respectively, In I-V characteristics, currents of MiM devices were different at the same voltage. It was thought that phenomena was occurred by interaction between function group and metal ion.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 단조 심포지엄
• /
• pp.185-194
• /
• 1999

This paper suggests the new techmology to control metal flow in order to reduce the number of preforming and machining for the cold forged product with complex geometry. This technology can be summarized the complex forming, which consists of bulk forming and sheet forming, and multi-action forging, which be preformed double action dies. To analyze the process, finite element simulation has been performed. The proposed technology is applied to hub which is part of air conditioner clutch. According to the result of this study, the relative velocity of mandrel and punch is primary process variable.

• Journal of Pharmaceutical Investigation
• /
• 제20권3호
• /
• pp.145-152
• /
• 1990

Zirconium pyrithione complex was prepared by reaction of sodium-pyrithione solution and zirconyl chloride solution. The physico-chemical properties of the complex was examined by means of IR, XRD, DSC and NMR. And the stability of Zr-complex was investigated on the basis of accelerated stability analysis under conditions of temp. elevation, UV radiation and pH dependence. The result indicates that the ratio of the ligand to metal in Zr-pyrithione complex was determined 4:1, and its stability constant was $4.643{\times}10^4$. The rate order of decomposition of the complex was apparent first-order reaction of which rate constant and the decomposition rate was not only accelerated by effect of heat and UV radiation but was catalyzed by specific acid-base catalysis considered the pH dependence for the hydrolysis of the complex and the suspension was most stable over the range pH 4-8 indicating that solvent catalysis is the primary made of reaction in this region.

• 환경생물
• /
• 제19권2호
• /
• pp.93-99
• /
• 2001

중금속을 처리하는 방법에는 일반적으로 화학적, 물리적 그리고 생물학적 처리방법 등이 있다. 이중 생물학적 처리방법은 미생물들의 자연 생체기작을 이용하는 방법으로, 생체축적 (biosorption & bioaccumulation), 산화환원반응 (oxidation & reduction), 메칠화 및 탈메칠화반응 (methylation & demethylation), 금속 유기물질 복합반응 (metal-organic complexation)과 비용해성 복합체형성 (insoluble complex formation) 등의 기작을 이용한 방법이다. 이런 중금속에 대한 생물학적 기작들은 중금속으로 오염된 환경을 복원시키는 데에 중요한 기술기반을 제공한다. 최근 금속의 종류와 미생물균주의 종류와 조건 그리고 오염환경에 따른 다양한 방법의 중금속 처리들이 제시되었고, 이는 주로 곰팡이, 박테리아, 조류(algae) 등을 이용한 방법들이다. 또한 분자생물학의 발전과 더불어 중금속 제거능력을 배가시킨 균주의 최근 개발시도는 기존의 생물학적 처리방법을 개량 발전시킬 수 있는 가능성을 제시하고 있다.

• 한국토양비료학회지
• /
• 제49권5호
• /
• pp.589-597
• /
• 2016

There are a number of industrial complexes which could be a source of heavy metal (loid)s contamination of arable soil in Gyeongnam province of South Korea. Heavy metal (loid)s accumulation of plant is more related to the concentration of plant available heavy metal (loid)s in arable soil than that of total heavy metal (loid)s. The objectives of this study were 1) to examine heavy metal concentrations in soils located near industrial complexes in Gyeongnam province and 2) to determine the relationship between concentration of plant available heavy metal (loid)s and chemical properties of soil. Soil samples were collected from 85 sites of arable lands nearby 7 industrial complexes in Gyeongnam province. Total heavy metal (loid)s concentration, available heavy metal (loid)s concentration, and chemical properties of collected soils were measured. The mean concentrations of arsenic (As), cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) in the soils were $5.8mg\;kg^{-1}$, $1.3mg\;kg^{-1}$, $0.03mg\;kg^{-1}$, $51.5mg\;kg^{-1}$, and $68.7mg\;kg^{-1}$, respectively. Total concentration of Cd and Zn in arable soil located near ${\nabla}{\nabla}$ industrial complex exceeded the warning criteria ($4mg\;kg^{-1}$ and $300mg\;kg^{-1}$ for Cd and Zn, respectively) as described by in the soil environmental conservation Act of Korea. The concentration of plant available heavy metal (loid)s was negatively related to the soil pH and available Pb and Zn concentrations had relatively high correlation coefficient when compared with other heavy metal (loid)s. The concentration of plant available Pb and Zn was negatively related to that of organic matter (OM). Based on the above results, it might be a good soil management to control pH and OM concentration with soil amendments such as lime and compost to reduce phytoavailability of heavy metal (loid)s in arable soil located near industrial complex.

• 한국환경농학회지
• /
• 제24권2호
• /
• pp.106-116
• /
• 2005

This experiment was conducted to investigate available extraction capacity and potential mobility of heavy metal according to the distribution property and contamination level of heavy metals in soils and to suggest a reform measure of soil environment assessment methodology applied with soil quality and the official soil heavy metal test methods in domestic and foreign countries. The soils were collected from the natural forest paddy with long-term application of same type fertilizer, and paddies near metal mine and industrial complex. The post-treatment methods of soil were partial extraction, acid digestion and sequential extraction methods. For the heavy metal contents with different soil properties, it was shown that their natural forest and paddy soil were slightly low and similar to the general paddy soil, while their paddies near metal mine and industrial complex were higher than the standard level of Soil Environment Protection Act. Heavy metal concentrations in the soils with different soil properties had difference between $HNO_3\;and\;HNO_3+HCl$ extractant by US-EPA 3051a method. There were highly significant positive relationships in both two methods. It was appeared that the higher extractable concentration ratio with 0.1N-HCl to total heavy metal content with $HNO_3+HCl$ extractant the greater total heavy metal content. There were highly significant positive correlationship between total heavy metal content and extractable content with 0.1N-HCl. For extractable capacity of soil extractable solution compared to the total heavy metal content it was appeared that it extractable method with 0.1N-HCl was higher than those with EDTA and DTPA. In extractable ratio with 0.1N-HCl in the contaminated paddy soils near mine and industrial complex, it was shown that the lower soil pH, the higher total heavy metal content. The order of a potential mobility coefficient by distribution of heavy metal content with ie different typies in the soil was Cd>Ni>Zn>Cu>Pb. It could be known that contamination characteristics of heavy metals with different types of soils were affected by different heavy metal components, contamination degree and soil chemical properties, and heavy metal concentration with different extractable methods had great variations with adjacent environment. To be compared with assessment methodology of soil environment impact at domestic and foreign countries with our results, it might be considered that there was necessary to make a single analysis method based on total heavy metal content with environmental overloading concept because of various analysis methods for total heavy metal content and present analysis method with great variation according to soil environment. In spite of showing higher concentration of heavy metal with acidic digestion than the extractable method, it might be considered that there is need to be adjusted the national standard of soil heavy metal contamination.

• 한국환경농학회지
• /
• 제17권1호
• /
• pp.48-53
• /
• 1998

1975년부터 산업활동이 시작된 익산 제1공단내 토양 중에 중금속함량을 비오염지 자연토양 중의 이들 함량과 비교하고 산업활동의 종류에 따른 토양 중 중금속 함량 변화와의 관계를 구명하기 위하여 주로 표층토를 중심으로 $0{\sim}3$ 및 $3{\sim}6cm$ 토양층에 있는 Cd, Cu, Ni, Pb 및 Zn의 함량을 조사 분석한 결과는 다음과 같다. 공단 내 토양 중 중금속별 함량변화는 Cd와 Cu는 시료의 $16{\sim}25%$, Pb와 Zn은 93% 이상이 비오염지 자연토양 중 이들 중금속함량 평균치 이상의 토양 중 축적현상을 보였고, Ni함량은 산업활동에 의한 토양 중 변화를 인정할 수 없었다. Cd의 분포는 $0{\sim}3cm$ 토양층은 섬유산업지역에서 5ppm이상의 최고치를 나타내었고, 그 다음이 화학약품 및 식품산업지역에서 높은 것으로 나타났다. $3{\sim}6cm$ 토양층에서는 금속가공지역에서 5ppm 이상의 최고치를 보였고, 다음이 섬유산업지역에서 높은 것으로 나타나 토양층위에 따라 Cd의 축적분포가 조금씩 달랐다. Cu함량은 $0{\sim}3cm$의 토양층에서는 전선류를 제조하는 지역에서 400ppm 이상의 최고치를 나타냈으며, $3{\sim}6cm$ 토양층에서는 전기 저항기, 기계제작 및 전선류 제조지역에서 400ppm이상의 토양축적현상을 보였다. Ni은 도금 및 금속가공지역에서 시료채취 토양층과 관계없이 35ppm이상의 함량을 보였고, 그 다음으로 석재 및 반도체 산업지역에서 25ppm이상의 토양 중 함량을 나타냈다. Pb는 화학약품 및 견직물공장에서 시료채취 토층과 관계없이 $400{\sim}1000ppm$이상의 토양 중 함량을 보였다. Zn은 화학약품과 견직물공장지역에서 토양 깊이와 관계없이 1200ppm이상의 가장 높은 함량분포를 보이는 곳도 있었으며, 그 다음이 도금 및 금속가공, 그리고 피혁공장순으로 Zn함량이 많은 것으로 나타났다. 결과적으로 산업활동의 형태 및 종류는 토양 중의 중금속의 종류 및 함량변화의 원인이 되고 있었고 이 지역에서는 Pb 및 Zn 토양중 함량변화가 뚜렷하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.2125-2130
• /
• 2013

A new nickel(II) complex $[NiL^1]^{2+}$ ($L^1$ = 1-(2-aminoethyl)-3-(N-{2-aminoethyl}aminomethyl-1,3-diazacyclohexane) containing one 1,3-diazacyclohexane ring has been prepared selectively by the metal-template condensation of formaldehyde with N-(2-aminoethyl)-1,3-propanediamine and ethylenediamine at room temperature. The complex reacts with nitroethane and formaldehyde to yield the pentaaza macrocyclic complex $[NiL^2]^{2+}$ ($L^2$ = 8-methyl-8-nitro-1,3,6,10,13-pentaazabicyclo[13.3.1]heptadecane) bearing one C-$NO_2$ pendant arm. The reduction of $[NiL^2]^{2+}$ by using Zn/HCl produces $[NiL^3(H_2O)]^{2+}$ ($L^3$ = 8-amino-8-methyl-1,3,6,10,13-pentaazabicyclo[13.3.1]heptadecane) bearing one coordinated C-$NH_2$ pendant arm that is readily protonated in acid solutions. The hexaaza macrocyclic complex $[NiL^4]^{2+}$ ($L^4$ = 8-phenylmethyl-8-nitro-1,3,6,8,10,13-hexaazabicyclo[13.3.1]heptadecane) bearing one N-$CH_2C_6H_5$ pendant arm has also been prepared by the reaction of $[NiL^1]^{2+}$ with benzylamine and formaldehyde. The nickel(II) complexes of $L^1$, $L^2$, and $L^4$ have square-planar coordination geometry in the solid states and in nitromethane. However, they exist as equilibrium mixtures of the square-planar $[NiL]^{2+}$ (L = $L^1$, $L^2$, or $L^4$) and octahedral $[NiL(S)_2]^{2+}$ species in various coordinating solvents (S); the proportion of the octahedral species $[NiL(S)_2]^{2+}$ is strongly influenced by the ligand structure and the nature of the solvent. Synthesis, spectra, and chemical properties of the nickel(II) complexes of $L^1-L^4$ are described.