• Textile Coloration and Finishing
• /
• v.32 no.3
• /
• pp.128-134
• /
• 2020

Heat and flame protecting cloth is usually made of meta aramid fiber because of its own properties. But the high inter molecular hydrogen bonding and high Tg is the reason of the difficulty to dye meta aramid fiber. Recently, it was commercialized that the easily dyeable meta aramid fiber(AMD) for improving dyeability. In this study, the dyeing properties of AMD dyed with cationic dyes were investigated. The K/S values of AMD were 5~10% higher than these of general meta aramid fiber(AM) in the case of 1%owf caused by the lower crystallinity of AMD. The difference between K/S values of AMD and AM was increased as increasing dyeing concentration. The washing and rubbing fastness grade of AM and AMD were similar and good to very good.

• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.221-230
• /
• 2023

Meta-aramid and polyamic acid were separated and the manufactured films were analyzed for their integration and logarithmic properties. The miscibility of meta-aramid and polyamic acid was analyzed by Fourier transform infrared spectroscopy and scanning electron microscopy. Using calorimetric analysis and differential scanning calorimetry, the storage of meta-aramid and polyamic acid, indicated on the right side of the column, was analyzed. It was confirmed that the initial thermal resistance occurs because the polyamic acid is accounted for in the meta-aramid, and the glass transition temperature and persistence phenomenon are explained.

• Textile Coloration and Finishing
• /
• v.25 no.4
• /
• pp.262-270
• /
• 2013

Temporarily solubilized reactive disperse dyes containing ${\beta}$-sulfatoethylsulfonyl group were applied to 100% meta-aramid knitted fabric and their dyeing properties were investigated. Reactive disperse dyes showed relatively high K/S values on meta-aramid fabric when compared with conventional disperse dye or reactive dye, which showed very low K/S values. Color yields of reactive disperse dyes were highly dependent on dyeing pH and optimum results were obtained at pH 6. Percent exhaustion of reactive disperse dye on meta-aramid fabric was over 80% at 2% o.w.f of dye concentration. Wash fastness of pyridone-based reactive disperse dyes was very good to excellent while that of aminoazobenzene reactive disperse dyes was medium to good. Light fastness of all the reactive disperse dyes was very poor which seems to be due to the low photostability of meta-aramid fiber itself.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.196-203
• /
• 2013

Surface modification of meta-aramid fibers was performed by phosphoric acid treatment. Surface morphology and element composition of untreated and treated fibers were analyzed by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). Effects of surface modification on the mechanical strength of aramid papers made from meta-aramid fibers and fibrid were investigated. Surface modification conditions were optimized by response surface analysis (RSA). Results show that phosphoric acid treatment increases the surface roughness and oxygen content of aramid fibers. They improve the interface bonding strength between aramid fibers and fibrid, which improves the tensile strength of aramid papers. The results of response surface analysis indicate that the tensile strength of aramid papers increases by 47.5% and reaches the maximum when meta-aramid fibers are treated with 21.1wt% phosphoric acid solution at $39.3^{\circ}C$ for 36.7 min.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2012

Dyeing and fastness characteristics of 100% meta-aramid fiber were investigated with cationic dyes and swelling agents under various dyeing conditions such as dyeing temperature and pH of dye bath. Dye exhaustion started at around $80^{\circ}C$ and settled down at $130^{\circ}C$. Among swelling agents used, N-methyl formanilide showed comparatively higher K/S values comparing to 1-phenoxypropan-2-ol. Under weak acidic conditions in the range pH 5 to 7, the exhaustion of cationic dyes could be enhanced leading to higher adsorption and stability of colorimetric property. Wash and rubbing fastness were generally good but low light fastness found can be attributable to the poor photo-stability of the cationic dyes.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.9
• /
• pp.857-862
• /
• 2013

Recently, the importance of GDI and diesel engine noise reduction is required, so newly designed components very close to noise sources are added in order to maximize the sound absorbing performances. In this study, the high temperature resistant part made with meta-Aramid nonwoven, which was applicable for high temperature applications of about $200^{\circ}C$ or more, such as engines and exhaust systems, was developed. And three-dimensional shaped component was successfully fabricated, and it was observed high temperature resistance of $260^{\circ}C$, lightweight properties and the noise was decreased by 1.0 dB with 70 g of product.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.154-155
• /
• 2009

• Textile Coloration and Finishing
• /
• v.30 no.1
• /
• pp.20-28
• /
• 2018

The near infrared ray camouflage fabric has a near infrared ray reluctance similar to the surrounding environment and has a camouflage effect on the surrounding environment. Synthetic fibers used in military uniforms are difficult to have gastrointestinal function as general commercial dyes, unlike cellulose fibers, which use some commercial vat dyes to impart infrared gastrointestinal function. In this study, we optimized the adsorption pH, temperature and time for NIR dye application for polyester fabrics, and established the optimum concentration for the evaluation of adsorption build-up characteristics. In addition, it is difficult to adsorb it since the polyester material has a dense crystal structure and the NIR dye is bulky. Therefore, a swelling agent used for dyeing meta-aramid fibers with high Tg and high crystallinity was introduced as a separate preparation to increase the affinity to polyester, which is a hydrophobic fiber, to thereby obtain an excellent adsorption rate. As a result of comparing before and after using swelling agent, the adsorption rate difference was 10 times or more when compared with before.