• 한국방사선학회논문지
• /
• 제12권7호
• /
• pp.887-893
• /
• 2018

본 연구는 병원 및 대학교 등에 설치된 X선 발생장치를 대상으로 진단용 방사선 발생장치의 품질관리 항목을 적용하여 성능 비교를 하여 주기적인 성능관리의 중요성을 인식시켜 성능유지 및 관리에 도움을 주고자 한다. 우선 재현성 및 직선성 실험결과 모든 실험조건에서 합격기준에 부합되었으며 주기적인 정도관리가 부족한 GX-650장치의 경우 재현성 평가의 백분율 오차가 높았으며 직선성 평가에서는 관전압을 100 kVp로 설정 시 0.105로 백분율 오차에서 벗어나게 측정되었다. 또한 관전압 및 관전류의 정확도 평가결과 상대적으로 X선 발생횟수가 낮은 장치에서 백분율 오차가 낮은 것을 알 수 있었다. 반가층 실험은 모든 장치에서 관전압 별 반가층 기준에 모두 포함되었다. 따라서 병원용, 실습용 구분보다는 모든 장치의 정도관리의 중요성을 인식하고 적극적으로 장치의 성능관리를 시행하여 장치를 유지 관리해야 할 것이며 특수의료장비처럼 짧은 주기의 정도관리 제도를 마련해야 할 것으로 사료된다.

• 한국재료학회지
• /
• 제33권11호
• /
• pp.465-474
• /
• 2023

The effects of La³⁺ substitution for Sr²⁺-site on the crystal structure and the dielectric properties of (Ba_0.7Sr_0.3-3x/2La_x) (Ti_0.9Zr_0.1)O₃ (BSLTZ) (0.005 ≤ x ≤ 0.02) ceramics were investigated. The structural characteristics of the BSLTZ ceramics were quantitatively evaluated using the Rietveld refinement method from X-ray diffraction (XRD) data. For the specimens sintered at 1,550 ℃ for 6 h, a single phase with a perovskite structure and homogeneous microstructure were observed for the entire range of compositions. With increasing La³⁺ substitution (x), the unit cell volume decreased because the ionic size of La³⁺ (1.36 Å) ions is smaller than that of Sr²⁺ (1.44 Å) ions. With increasing La³⁺ substitution (x), the tetragonal phase fraction increased due to the A-site cation size mismatch effect. Dielectric constant (ε_r) increased with the La³⁺ substitution (x) due to the increase in tetragonality (c/a) and the average B-site bond valence of the ABO₃ perovskite. The BSLTZ ceramics showed a higher dielectric loss due to the smaller grain size than that of (Ba_0.7Sr_0.3)(Ti_0.9Zr_0.1)O₃ ceramics. BSLTZ (x = 0.02) ceramics met the X7R specification proposed by the Electronic Industries Association (EIA).

• KCI Concrete Journal
• /
• 제13권2호
• /
• pp.10-18
• /
• 2001

The spectral analysis of surface waves (SASW) method, which is an in-situ seismic technique, has mainly been developed and used for many years to determine the stiffness profile of layered media (such as asphalt concrete and layered soils) in an infinite half-space. This paper presents a modified experimental technique for nondestructive evaluation of in-place cement mortar compressive strength in single-layer concrete slabs of rather a finite thickness through a correlation to surface wave velocity. This correlation can be used in the quality control of early age cement mortar structures and in evaluating the integrity of structural members where the infinite half space condition is not met. In the proposed SASW field test, the surface of the structural members is subjected to an impact, using a 12 mm steel ball, to generate surface wave energy at various frequencies. Two accelerometer receivers detect the energy transmitted through the medium. By digitizing the analog receiver outputs, and recording the signals for spectral analysis, surface wave velocities can be identified. Modifications to the SASW method includes the reduction of boundary reflections as adopted on the surface waves before the point where the reflected compression waves reach the receivers. In this study, the correlation between the surface wave velocity and the compressive strength of cement mortar is developed using one 36"x36"x4"(91.44$\times$91.44$\times$91.44 cm) cement mortar slab of 2,000 psi (140 kgf/$\textrm{cm}^2$) and two 36"x36"x4"(91.44$\times$91.44$\times$91.44 cm) cement mortar slabs of 3,000 psi (210 kgf/$\textrm{cm}^2$).

• 한국위성정보통신학회논문지
• /
• 제10권3호
• /
• pp.131-136
• /
• 2015

본 논문에서는 정지궤도위성 관측탑재체 고속 데이터 전송을 위한 X-대역 이중모드 원통형 고전력 전송 출력필터의 비행모델 개발 이전에 개발 모델을 설계하고 해석적 멀티팩션 요구마진을 보장하기 위해 해석되어졌다. 먼저 멀티팩션에 가장 민감한 슬롯 아이리스의 폭 및 두께를 가변하면서 멀티팩션 발생 임계전력의 민감도를 분석하였으며 그것을 토대로 선정된 아이리스 폭 및 두께에 대한 주파수 대역에 따른 멀티팩션 임계전력을 분석하였으며 대역 내에서 해석적 요구 8 dB 마진을 가짐을 확인하였다. 또한 멀티팩션과 함께 고출력 소자에 중요한 코로나 발생 임계전력 분석을 아이리스 폭 및 두께의 영향을 제시하였다. 마지막으로 제작된 개발모델을 시험한 결과 주요 요구사항을 만족함을 확인하였다.

• 한국재료학회지
• /
• 제7권2호
• /
• pp.145-151
• /
• 1997

AI-xSi/ySiC( x:6~18wt%, y: 3~9wt%, SiC 입자크기: $10~28{\mu}m$) 복합재료를 재용해한 후 항온 유지하고 응고 시킬때 SiC 입자가 몰드의 하부로 침강하는 현상을 계통적으로 조사하였다. AI-Si/SiC 복합재료 용탕을 항온으로 유지하면 입자가 없는 지역은 유지시간이 약 처음 30분 동안 빠르게 증가한다. SiC 입자가 크기가 클수록 SiC입자의 크기가 클수록 SiC입자의 침강속도가 빠르다. 또한 복합재료중 철가한 SiC 입자의 부피분율이 증가하면 입자의 침강속도는 감소한다.

• 복식
• /
• 제66권8호
• /
• pp.1-13
• /
• 2016

The purpose of this study was to analyze the effects of comparative advertisement brand typicality and need for recognition in outdoor apparel market. This study was created with a mixed factorial design of 2 (Advertisement types: Comparative advertisement vs. General advertisement) X 2(Brand Typicality: High Brand vs. Low Brand) X 2 (Need for Cognition: High vs. Low). The results of this study are as follows: First, it was shown that comparative advertisement had a greater positive influence on attitudes toward advertising intentions in comparison to general advertisements. Second, while comparative advertisement was more effective than general advertisement for outdoor apparel brands with low typicality. Third, consumers with higher need for cognition showed a preferred attitude toward advertising intention when met with comparative advertising in contrast to general advertisement. Fourth, when consumers with higher needs for cognition were exposed to advertisement for brands of lower typicality, there was higher positive influence on the attitudes toward advertisement intention with comparative advertisement in comparison to general advertisement. This means the comparative advertisement may be effective for the new garment brand or the garment brands having low typicality to secure the cognition quickly from the consumers having high need for cognition.

• 상하수도학회지
• /
• 제22권1호
• /
• pp.93-103
• /
• 2008

This study was conducted to optimize a unidirectional flushing program in distribution pipes by analysis of water pressure, velocity, quality, and other parameters during flushing. As a result, correlation coefficient between flushed pipe length and the flushing duration was obtained $R^2=0.83$ and the equation $Y_{Time}=0.0571{\cdot}X_{Pipe\;length}+4.7648$ for 10 pipes. The averaged flushing velocity in the pipes, 1.1 m/s, was enough to remove loose deposits on the inner wall of the pipes. 3 of 92 water samples taken during flushing met the National Drinking Water Quality Standard for Fe and Mn, but not for Al. Turbidity less than 1 NTU is suggested for the appropriate criteria to finish flushing in pipes. The coefficient of determination ($R^2$) between turbidity and TSS was 0.95 and the equation was induced as $Y_{TSS}=1.2068{\cdot}X_{Turbidity}$. The amount of removed deposits could be estimated from the turbidity data of discharged water in field because turbidity and TSS in the discharged water is highly correlated.

• 한국인터넷방송통신학회논문지
• /
• 제15권2호
• /
• pp.195-202
• /
• 2015

위성통신 서비스가 점점 증가함에 따라 단일대역 안테나의 성능을 넘어서는 이중대역 또는 삼중대역 안테나의 필요성도 증가하고 있다. 본 논문에서는 위성통신용 삼중대역 동시사용 안테나를 제안한다. 교체형 혼을 통해 삼중대역을 구현하는 일반적인 다중대역 안테나와는 달리 주름형 혼과 유전체 혼으로 구성된 삼중대역 급전부 조립체 및 그레고리안 타입의 반사판을 사용하여 삼중대역(X, Ku, Ka대역) 신호의 동시 송수신을 가능하게 한다. 제안된 안테나의 특성은 모의실험과 실제측정으로 비교 분석하였다. 그 결과, 제안된 삼중대역 안테나의 방사패턴은 모의실험 계산결과와 비슷한 성능을 보였고, 규격 또한 만족하였다.

• 반도체디스플레이기술학회지
• /
• 제3권1호
• /
• pp.21-26
• /
• 2004

Recently with the development of power switching device and DSP which has peripheral devices to control AC servo system, the servo technology has met a new development opportunity. Those things make it possible to reduce the time of developing a AC servo system. Fixed point DSP such as TMS320F240x, and TMS320F28x series have a disadvantage in calculating floating number where TMS320C32 or TMS320C31 are floating point DSP. However they usually become a complex hardware system to implement the AC servo system and it increases the cost. In this study, a DSP based AC servo system with a 3-phase PMSM is proposed. The newly produced DSP TMX320F28l2-version C which has the performance of fast speed, 150MIPS, and a rich peripheral interface such as a 12bit high speed AD converter, QEP(Quadrature Encoder Pulse) circuit, PDPINT(Power Drive Protect Interrupt), SVPWM module and dead time module are used. This paper presents a method to overcome fixed point calculating using scaling all parameters. Also space vector pulse width modulation (SVPWM) using off-set voltage and a digital PI control are implemented to the servo system.

• 한국미생물·생명공학회지
• /
• 제23권4호
• /
• pp.446-453
• /
• 1995

$\alpha $-Arabinofuranosidase was produced by E. coli HB101 haboring the recombinant plasmid pKMG11 which contained the arfI gene of Bacillus stearothermophilus. The maximum production of the enzyme was observed when E. coli HB101 cells were grown at 37$\circ$C for 20 hours in the medium containing 0.5% arabinose, 1.0% tryptone, 0.5% yeast extract, and 1% NaCl. The $\ALPHA $-arabinofuranosidase produced was purified to homogeneity using a combination of 20-50% ammonium sulfate precipitation, DEAE-Sepharose CL-6B ion exchange column chromatography and Sepharose 6B-100 gel filtration. The purified enzyme was most active at 55$\circ$C and pH 6.5. The K$_{m}$ and V$_{max}$ values of the enzyme on $\rho $-nitrophenyl-$\alpha $-arabinofuranoside was determined to be 2.99 mM and 0.43 $\mu $mole/min (319.74 $\mu $mole/min/mg), respectively. The pI value was 4.5. The molecular weight of the native protein was estimated to be 289 kDa. The SDS-polyacrylamide gel clectrophoresis analysis suggested that the functional protein was a trimer of the 108 kDa identical subunits. The N-terminal amino acid sequence of the a-arabinofuranosidase was identified as X-Ser-Thr-Ala-Pro-Arg( \ulcorner )-Ala-Thr-Met-Val-Ile-Asp-X-Ala-Phe.