• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.883-891
• /
• 2009

This paper proposes Ethernet linear protection switching technology in order to provide the SONET/SDH-like resiliency over Metro Ethernet Networks. The proposed design is made of an architecture with a control processor board and several data processing boards, where the control processor board is independent of data processing board, providing a flexible solution for carrier Ethernet system. However, it leads an increasing message delay between inter-processors. In this paper, we implement and confirm a restoration of failed transport connections withing 50 millisecond in spite of increasing message delay between the control processing board and data processing board providing carrier-class network survivability.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.2
• /
• pp.184-190
• /
• 2008

This paper describes a message model based on XML (eXtensible Markup Language) to present real-time data from sensors and instruments at manufacturing processes for web service. HTML (Hyper Text Markup Language) is inadequate for describing real-time data from process control plants while it is suitable for displaying non-real-time multimedia data on web. For XML-based web service of process data, XML format for the data presentation was proposed after investigating data of various instruments at steel-making plants. Considering transmission delay inevitably caused from increased message length and processing delay from transformation of raw data into defined format, which was critical for operation of a real-time system, its performance was evaluated by simulation. In the simulation, we assumed two implementation models for conducting the transformation function. In one model, transformation was done at an SCC (Supervisory Control Computer) after receiving real-time data from instruments. In the other model, transformation had been carried out at instruments before the data were transmitted to the SCC. Various tests had been conducted under different conditions of offered loads and data lengths and their results were described.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.1
• /
• pp.24-30
• /
• 2006

The Controller Area Network (CAN) is being widely used for real-time control application and small-scale distributed computer controller systems. When the stuff bits are generated by bit-stuffing mechanism in the CAN network, it causes jitter including variations in response time and delay In order to eliminate this jitter, stuff bits must be controlled to minimize the response time and to reduce the variation of data transmission time. This paper proposes the method to reduce the stuff bits by restriction of available identifier and bit mask using exclusive OR operation. This da manipulation method are pretty useful to the real-time control strategy with respect to performance. However, the CAN may exhibit unfair behavior under heavy traffic conditions. When there are both high and low priority messages ready for transmission, the proposed precedence priority filtering method allows one low priority message to be exchanged between any two adjacent higher priority messages. In this way, the length of each transmission delays is upper bounded. These procedures are implemented as local controllers for the ISHURO(Inha Semvung Humanoid Robot).

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.269-277
• /
• 2022

In this paper, we overview the system development status of the national maritime precise point positioning-real-time kinematic (PPP-RTK) service in Korea, also known as the Precise POsitioning and INTegrity monitoring (POINT) system. The development of the POINT service began in 2020, and the open service is scheduled to start in 2025. The architecture of the POINT system is composed of three provider-side facilities-a reference station, monitoring station, and central control station-and one user-side receiver platform. Here, we propose the detailed functionality of each component considering unidirectional broadcasting of augmentation data. To meet the centimeter-level user positioning accuracy in maritime coverage, new reference stations were installed. Each reference station operates with a dual receiver and dual antenna to reduce the risk of malfunctioning, which can deteriorate the availability of the POINT service. The initial experimental results of a testbed from corrections generated from the testbed network, including newly installed reference stations, are presented. The results show that the horizontal and vertical accuracies satisfy 2.63 cm and 5.77 cm, respectively. For the purpose of (near) real-time broadcasting of POINT correction data, we designed a correction message format including satellite orbit, satellite clock, satellite signal bias, ionospheric delay, tropospheric delay, and coordinate transformation parameters. The (near) real-time experimental setup utilizing (near) real-time processing of testbed network data and the designed message format are proposed for future testing and verification of the system.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.1
• /
• pp.45-54
• /
• 2022

Recently, the introduction of Cooperative Intelligent Transport Systems (C-ITS) has been attempted to solve the limitation of only the sensor of the vehicle itself. For example, vehicles traveling at intersections can drive more safely through C-ITS. By using V2X communication of WAVE and LTE, the driver can receive the status and time of traffic lights. However, LTE has a larger transmission delay time than WAVE, so timimg data may not match in real time. In this paper, using the SPaT message, it was confirmed that LTE has a larger C-ITS service transmission delay time than WAVE. Finally, it was confirmed that the timing data of SPaT provided by LTE corrected by the algorithm is similar to SPaT provided by WAVE. It was confirmed that safer intersection driving is possible based on real-time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.203-206
• /
• 2004

Recently home network has been developed in the field of Information Technology. And there are many protocols for smart home, such as Lonworks, Echonet, KNX, LnCP etc. However, the performance evaluation has not been nearly known between the protocols. Hence, this paper evaluates the performance of KNX by Konnex Association and LnCP(Living network Control Protocol) by LG Electronics. We developed simulation model using flowchart of KNX and LnCP and simulation scenario through analysis of message to be generated in the home network. Furthermore, we evaluate simulation performance, such as mean transmission delay, maximum transmission delay, and collision rate of both protocols.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1996.11a
• /
• pp.326-335
• /
• 1996

In this paper, we quantify the tradeoff between security and performance in secure data communication systems based on the queueing theory, and propose the optimization methods, such as the preprocessing, a message segmentation, compression, integration of compression and encryption and integration of user authentication and access control, which are able to reduce the delay induced by the security mechanisms and protocols. Moreover, we analyze the average delay for the secure data communication systems through the computer simulations, which are modeled by M/M/1, M/E$_2$/1 and M/H$_2$/1 queueing systems, respectively. We consider the DES, RSA digital signature and the combination of IDEA and RSA as security mechanisms for applying security services.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.4
• /
• pp.151-160
• /
• 2009

While portable and wireless devices are pouring, a new network technology is needed as a breakthrough. The new network technology features large delays, intermittent connectivity, and absence of an end-to-end path from sources to destinations. A network which has one of those characteristics is called DTNs(Delay Tolerant Networks). The main 4 routing methods have been researched so far in extream environment. In this paper, we look into the reliability of DTMNs(Delay Tolerant Mobile Networks) in several different situations, and propose an algorithm that selects a positive routine by sending the only information of its position when making a connection to a detected node. We simulate the proposed algorithm here in DTN using ONE simulator. As a result, it shows that the algorithm reduces the number of message transmission each node.

• Journal of Navigation and Port Research
• /
• v.40 no.5
• /
• pp.271-278
• /
• 2016

Localized atmospheric conditions between multi-reference stations can bring the tropospheric delay irregularity that becomes an error terms affecting positioning accuracy in network RTK environment. Imbalanced network error can affect the network solutions and it can corrupt the entire network solution and degrade the correction accuracy. If an anomaly could be detected before the correction message was generated, it is possible to eliminate the anomalous satellite that can cause degradation of the network solution during the tropospheric delay anomaly. An atmospheric grid that consists of four meteorological stations was used to detect an inhomogeneous weather conditions and tropospheric anomaly applied AWSs (automatic weather stations) meteorological data. The threshold of anomaly detection algorithm was determined based on the statistical weather data of AWSs for 5 years in an atmospheric grid. From the analytic results of anomaly detection algorithm it showed that the proposed algorithm can detect an anomalous satellite with an anomaly flag generation caused tropospheric delay anomaly during localized atmospheric conditions between stations. It was shown that the different precipitation condition between stations is the main factor affecting tropospheric anomalies.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.371-377
• /
• 2007

Ionospheric time delay is one of the main error source for single-frequency DGPS applications, including time transfer and Wide Area Differential GPS (WADGPS). Grid-based algorithm was already developed for WADGPS but that algorithm is not applicable to geomagnetic storm condition in accuracy and management. In geomagnetic storm condition, the spatial distribution of vertical ionospheric delay is noisy and therefore the accuracy of modeling become low in grid-based algorithm. For better accuracy, function based algorithm can be used but the continuity of correction message is not guranteed. In this paper, we propose the ionospheric model using wavelet based algorithm. This algorithm shows better accuracy with the same number of correction message than the existing spherical harmonics algorithm and guarantees the continuity of correction messages when the number of message is expanded for geomagnetic storm condition.