• Journal of Powder Materials
• /
• v.23 no.3
• /
• pp.189-194
• /
• 2016

We report a facile method for preparing KIT-1 mesoporous silicates with two different macroporous structures by dual templating. As a template for macropores, polystyrene (PS) beads are assembled into uniform three dimensional arrays by ice templating, i.e., by growing ice crystals during the freezing process of the particle suspension. Then, the polymeric templates are directly introduced into the precursor-gel solution with cationic surfactants for templating the mesopores, which is followed by hydrothermal crystallization and calcination. Later, by burning out the PS beads and the surfactants, KIT-1 mesoporous silicates with macropores are produced in a powder form. The macroporous structures of the silicates can be controlled by changing the amount of EDTANa4 salt under the same templating conditions using the PS beads and inverse-opal or hollow structures can be obtained. This strategy to prepare mesoporous powders with controllable macrostructures is potentially useful for various applications especially those dealing with bulky molecules such as, catalysis, separation, drug carriers and environmental adsorbents.

• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.172-178
• /
• 2006

Mesoporous silicate materials have been used as adsorbents for the removal of heavy metals from water by introducing functional groups such as thiol and amine. In this research, it was investigated whether surfactants used as templating agents in synthetic processes can act as adsorption sites for heavy metals. Three mesoporous silicates-SBA-15, MCM-41, and HMS were synthesized using, respectively, block copolymer, hexadecyltrimethylammoniumbromide (HDTMA), and dodecyamine as surfactants. X-ray diffraction and $N_2$ gas adsorption analysis confirmed that the mesoporous silicates were well prepared and FT-IR spectra resulted in the existence of the surfactants in as-synthesized mesoporous silicates and the removal of surfactants after calcination. The interactions between $Pb^{2+}$ ions and the mesoporous silicate materials with/without surfactants were observed. In adsorption kinetic experiments, it revealed that the calcined mesoporous silicates and the surfactant-loaded SBA-15 almost had no adsorption capacity for $Pb^{2+}$ ions. In contrast, the surfactant-loaded MCM-41 and HMS showed, respectively, the adsorption capacities of 26.60 and 115.16 mg/g which were acquired through the fits of adsorption kinetic data to the pseudo second order kinetic model. The adsorption capacities were comparable to those of other mesoporous adsorbents for heavy metals.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.291-298
• /
• 2012

Carbamoylphosphate (CMPO) [CMPO analogue; 2-(diphenylphosphoryl)-N-(3-(triethoxysilyl)propyl)acetamide]silane, as a functional self-assembled molecules, grafted mesoporous silicates were prepared by simple hydrolysis and condensation reaction. Pore sized tailored mesoporous silicates such as MCM-41, SBA-15, or amorphous silica nanoparticles were adopted as host materials. The surface area of ordered mesoporous silicates was ranged from 680 $m^2/g$ to 1310 $m^2/g$ with different pore diameters that estimated to be ca. 2.3~9.1 nm by BJH method. Among the OMMs host materials, SBA-15(II) has higher loading ratio (~35 wt%) of CMPO derivative than other OMMs. Accessibility to CMPO silane functional groups in the surface of mesoporous silicas was studied by lanthanide ions sorption experiments. All of the CMPO modified OMMs favors the smaller Eu(III) and Nd(III) cations than La(III) for relative larger ionic radius.

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.452-456
• /
• 2008

Mesoporous silicate materials have been used as adsorbents due to the advantage of high specific surface area and regular mesopores. In this study, conventional mesoporous silicates (MCM-41, and SBA-15) were utilized as adsorbents for gaseous benzene, one of volatile organic compounds. In the results of the breakthrough curves of gaseous benzene, SBA-15 showed a higher benzene adsorption capacity in adsorption condition of this study. Especially, compared to benzene adsorption of zeolite X, that of SBA-15 was higher by a factor of 2.7. With increasing adsorption temperature, adsorption capacity for benzene of SBA-15 was decreased rapidly. This indicates that benzene adsorbed weakly on SBA-15.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.107-113
• /
• 2009

This study investigated the decomposition activities of toluene on 10 mol% Al-W-incorporated mesoporous titano (15 mol %) silicates. The mesopore sizes observed in the transmission electron microscopy images ranged from 2.0 to 5.0 nm, and the pores were irregular on the addition of 10 mol% Al or W ions, but changed to regular hexagonal forms with the simultaneous additions of Al and W. The X-ray photon spectroscopy results showed a shift of the special peak for Ti2p in Al-incorporated mesoporous titanosilicates to a stronger binding energy compared to those of mesoporous titanosilicates and Al-incorporated mesoporous titanosilicates. Three O1s peaks in the spectra of the Al and W coexisted samples were observed at 530.5 and 531.7, 533, and 533.7eV, which were assigned to $Ti-Os\;in\;TiO_2\;and\;Ti_2O_3,\;Si-O\;in\;SiO_2\;and\;Al-O\;in\;Al_2O_3$, respectively. The toluene molecules desorbed at lower temperatures over W-incorporated mesoporous titanosilicates, and the amounts of toluene desorbed were also small; however, Al-incorporated mesoporous titanosilicates adsorbed much more toluene, particular over $Al_7.5-W_2.5-Ti_15-Si_75$. The photocatalytic decomposition of toluene was more enhanced over $Al_7.5-W_2.5-Ti_15-Si_75$ than over Al- or W-incorporated mesoporous titanosilicates only.